arm64: zynqmp: Fix open drain warning on ZynqMP

Mark both GPIO lines as GPIO_OPEN_DRAIN which is required by i2c-gpio DT
binding. Similar change was done by commit 8df80c1801c9 ("ARM: dts: exynos:
Convert to new i2c-gpio bindings").

Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a0faf488dde310e1c1c1a676c371e223db6bdca6.1686227712.git.michal.simek@amd.com

12 files changed, 32 insertions, 32 deletions

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 603839c82599..e06c6824dea4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -27,8 +27,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* u14 - 0x40 - ina260 */
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a91d09e7da4b..030e2c93f0e6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -22,8 +22,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* u14 - 0x40 - ina260 */
 	/* u43 - 0x2d - usb5744 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index dfd1a18f5a10..c1f21b0e1760 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -245,8 +245,8 @@
 	status = "okay";
 	bootph-all;
 	clock-frequency = <400000>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
 		bootph-all;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index d9d1de5f313c..e821d55d8d5a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -119,8 +119,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	eeprom: eeprom@55 {
 		compatible = "atmel,24c64"; /* 24AA64 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 6503f4985f8d..b59e11316b4b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -110,8 +110,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u26: gpio@20 {
 		compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b1e933b8a2cd..0d2ea9c09a0a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -91,8 +91,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &i2c1 {
@@ -100,8 +100,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 44d1f351bb75..d0091d3cb764 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -180,8 +180,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	i2c-mux@75 { /* u11 */
 		compatible = "nxp,pca9548";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 8767f147cbe3..84952c14f021 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -233,8 +233,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
@@ -497,8 +497,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index e185709c0d84..5084ddcee00f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -140,8 +140,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 7fceebd1815c..b273bd1d920a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -145,8 +145,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 27b2416cb6d8..50c384aa253e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -245,8 +245,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
@@ -508,8 +508,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 6224365826d8..617cb0405a7d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -205,8 +205,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u22: gpio@20 {
 		compatible = "ti,tca6416";
@@ -385,8 +385,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	i2c-mux@74 { /* u26 */
 		compatible = "nxp,pca9548";