Merge branch 'lan743x-phylink'

Raju Lakkaraju says:

====================
Add support to PHYLINK for LAN743x/PCI11x1x chips

This is the follow-up patch series of
https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html

Divide the PHYLINK adaptation and SFP modifications into two separate patch
series.

The current patch series focuses on transitioning the LAN743x driver's PHY
support from phylib to phylink.

Tested on PCI11010 Rev-1 Evaluation board

Change List:
============
V5 -> V6:
  - Remove the lan743x_find_max_speed( ) function. Not require
  - Add EEE enable check before calling lan743x_mac_eee_enable( ) function
V4 -> V5:
  - Remove the fixed_phy_unregister( ) function. Not require
  - Remove the "phydev->eee_enabled" check to update the MAC EEE
    enable/disable
  - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer.
  - Add phy_support_eee() to initialize the EEE flags
V3 -> V4:
  - Add fixed-link patch along with this series.
    Note: Note: This code was developed by Mr.Russell King
    Ref:
    https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815
  - Change phylink fixed-link function header's string from "Returns" to
    "Returns:"
  - Remove the EEE private variable from LAN743x adapter strcture and fix the
    EEE's set/get functions
  - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and
    __RGMII_TXID) replace with phy_interface_set_rgmii( ) function
  - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( )

V2 -> V3:
  - Remove the unwanted parens in each of these if() sub-blocks
  - Replace "to_net_dev(config->dev)" with "netdev".
  - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces
  - Fix the lan743x_phy_handle_exists( ) return type

V1 -> V2:
  - Fix the Russell King's comments i.e. remove the speed, duplex update in
    lan743x_phylink_mac_config( )
  - pre-March 2020 legacy support has been removed

V0 -> V1:
  - Integrate with Synopsys DesignWare XPCS drivers
  - Based on external review comments,
  - Changes made to SGMII interface support only 1G/100M/10M bps speed
  - Changes made to 2500Base-X interface support only 2.5Gbps speed
  - Add check for not is_sgmii_en with is_sfp_support_en support
  - Change the "pci11x1x_strap_get_status" function return type from void to
    int
  - Add ethtool phylink wol, eee, pause get/set functions
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 498 insertions, 324 deletions

diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index ce2435987fb6..2e3eb37a45cd 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -46,12 +46,13 @@ config LAN743X
 	tristate "LAN743x support"
 	depends on PCI
 	depends on PTP_1588_CLOCK_OPTIONAL
-	select PHYLIB
 	select FIXED_PHY
 	select CRC16
 	select CRC32
+	select PHYLINK
 	help
-	  Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip
+	  Support for the Microchip LAN743x and PCI11x1x families of PCI
+	  Express Ethernet devices
 
 	  To compile this driver as a module, choose M here. The module will be
 	  called lan743x.
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 0f1c0edec460..1a1cbd034eda 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -1054,61 +1054,55 @@ static int lan743x_ethtool_get_eee(struct net_device *netdev,
 				   struct ethtool_keee *eee)
 {
 	struct lan743x_adapter *adapter = netdev_priv(netdev);
-	struct phy_device *phydev = netdev->phydev;
-	u32 buf;
-	int ret;
-
-	if (!phydev)
-		return -EIO;
-	if (!phydev->drv) {
-		netif_err(adapter, drv, adapter->netdev,
-			  "Missing PHY Driver\n");
-		return -EIO;
-	}
 
-	ret = phy_ethtool_get_eee(phydev, eee);
-	if (ret < 0)
-		return ret;
+	eee->tx_lpi_timer = lan743x_csr_read(adapter,
+					     MAC_EEE_TX_LPI_REQ_DLY_CNT);
 
-	buf = lan743x_csr_read(adapter, MAC_CR);
-	if (buf & MAC_CR_EEE_EN_) {
-		/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
-		buf = lan743x_csr_read(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT);
-		eee->tx_lpi_timer = buf;
-	} else {
-		eee->tx_lpi_timer = 0;
-	}
-
-	return 0;
+	return phylink_ethtool_get_eee(adapter->phylink, eee);
 }
 
 static int lan743x_ethtool_set_eee(struct net_device *netdev,
 				   struct ethtool_keee *eee)
 {
-	struct lan743x_adapter *adapter;
-	struct phy_device *phydev;
-	u32 buf = 0;
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	u32 tx_lpi_timer;
 
-	if (!netdev)
-		return -EINVAL;
-	adapter = netdev_priv(netdev);
-	if (!adapter)
-		return -EINVAL;
-	phydev = netdev->phydev;
-	if (!phydev)
-		return -EIO;
-	if (!phydev->drv) {
-		netif_err(adapter, drv, adapter->netdev,
-			  "Missing PHY Driver\n");
-		return -EIO;
-	}
+	tx_lpi_timer = lan743x_csr_read(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT);
+	if (tx_lpi_timer != eee->tx_lpi_timer) {
+		u32 mac_cr = lan743x_csr_read(adapter, MAC_CR);
+
+		/* Software should only change this field when Energy Efficient
+		 * Ethernet Enable (EEEEN) is cleared.
+		 * This function will trigger an autonegotiation restart and
+		 * eee will be reenabled during link up if eee was negotiated.
+		 */
+		lan743x_mac_eee_enable(adapter, false);
+		lan743x_csr_write(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT,
+				  eee->tx_lpi_timer);
 
-	if (eee->eee_enabled) {
-		buf = (u32)eee->tx_lpi_timer;
-		lan743x_csr_write(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT, buf);
+		if (mac_cr & MAC_CR_EEE_EN_)
+			lan743x_mac_eee_enable(adapter, true);
 	}
 
-	return phy_ethtool_set_eee(phydev, eee);
+	return phylink_ethtool_set_eee(adapter->phylink, eee);
+}
+
+static int
+lan743x_ethtool_set_link_ksettings(struct net_device *netdev,
+				   const struct ethtool_link_ksettings *cmd)
+{
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+	return phylink_ethtool_ksettings_set(adapter->phylink, cmd);
+}
+
+static int
+lan743x_ethtool_get_link_ksettings(struct net_device *netdev,
+				   struct ethtool_link_ksettings *cmd)
+{
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+	return phylink_ethtool_ksettings_get(adapter->phylink, cmd);
 }
 
 #ifdef CONFIG_PM
@@ -1120,8 +1114,7 @@ static void lan743x_ethtool_get_wol(struct net_device *netdev,
 	wol->supported = 0;
 	wol->wolopts = 0;
 
-	if (netdev->phydev)
-		phy_ethtool_get_wol(netdev->phydev, wol);
+	phylink_ethtool_get_wol(adapter->phylink, wol);
 
 	if (wol->supported != adapter->phy_wol_supported)
 		netif_warn(adapter, drv, adapter->netdev,
@@ -1162,7 +1155,7 @@ static int lan743x_ethtool_set_wol(struct net_device *netdev,
 		    !(adapter->phy_wol_supported & WAKE_MAGICSECURE))
 			phy_wol.wolopts &= ~WAKE_MAGIC;
 
-		ret = phy_ethtool_set_wol(netdev->phydev, &phy_wol);
+		ret = phylink_ethtool_set_wol(adapter->phylink, wol);
 		if (ret && (ret != -EOPNOTSUPP))
 			return ret;
 
@@ -1351,44 +1344,16 @@ static void lan743x_get_pauseparam(struct net_device *dev,
 				   struct ethtool_pauseparam *pause)
 {
 	struct lan743x_adapter *adapter = netdev_priv(dev);
-	struct lan743x_phy *phy = &adapter->phy;
 
-	if (phy->fc_request_control & FLOW_CTRL_TX)
-		pause->tx_pause = 1;
-	if (phy->fc_request_control & FLOW_CTRL_RX)
-		pause->rx_pause = 1;
-	pause->autoneg = phy->fc_autoneg;
+	phylink_ethtool_get_pauseparam(adapter->phylink, pause);
 }
 
 static int lan743x_set_pauseparam(struct net_device *dev,
 				  struct ethtool_pauseparam *pause)
 {
 	struct lan743x_adapter *adapter = netdev_priv(dev);
-	struct phy_device *phydev = dev->phydev;
-	struct lan743x_phy *phy = &adapter->phy;
-
-	if (!phydev)
-		return -ENODEV;
-
-	if (!phy_validate_pause(phydev, pause))
-		return -EINVAL;
-
-	phy->fc_request_control = 0;
-	if (pause->rx_pause)
-		phy->fc_request_control |= FLOW_CTRL_RX;
 
-	if (pause->tx_pause)
-		phy->fc_request_control |= FLOW_CTRL_TX;
-
-	phy->fc_autoneg = pause->autoneg;
-
-	if (pause->autoneg == AUTONEG_DISABLE)
-		lan743x_mac_flow_ctrl_set_enables(adapter, pause->tx_pause,
-						  pause->rx_pause);
-	else
-		phy_set_asym_pause(phydev, pause->rx_pause,  pause->tx_pause);
-
-	return 0;
+	return phylink_ethtool_set_pauseparam(adapter->phylink, pause);
 }
 
 const struct ethtool_ops lan743x_ethtool_ops = {
@@ -1413,8 +1378,8 @@ const struct ethtool_ops lan743x_ethtool_ops = {
 	.get_ts_info = lan743x_ethtool_get_ts_info,
 	.get_eee = lan743x_ethtool_get_eee,
 	.set_eee = lan743x_ethtool_set_eee,
-	.get_link_ksettings = phy_ethtool_get_link_ksettings,
-	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+	.get_link_ksettings = lan743x_ethtool_get_link_ksettings,
+	.set_link_ksettings = lan743x_ethtool_set_link_ksettings,
 	.get_regs_len = lan743x_get_regs_len,
 	.get_regs = lan743x_get_regs,
 	.get_pauseparam = lan743x_get_pauseparam,
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index e418539565b1..4dc5adcda6a3 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -15,6 +15,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/iopoll.h>
 #include <linux/crc16.h>
+#include <linux/phylink.h>
 #include "lan743x_main.h"
 #include "lan743x_ethtool.h"
 
@@ -992,6 +993,42 @@ static int lan743x_sgmii_write(struct lan743x_adapter *adapter,
 	return ret;
 }
 
+static int lan743x_get_lsd(int speed, int duplex, u8 mss)
+{
+	int lsd;
+
+	switch (speed) {
+	case SPEED_2500:
+		if (mss == MASTER_SLAVE_STATE_SLAVE)
+			lsd = LINK_2500_SLAVE;
+		else
+			lsd = LINK_2500_MASTER;
+		break;
+	case SPEED_1000:
+		if (mss == MASTER_SLAVE_STATE_SLAVE)
+			lsd = LINK_1000_SLAVE;
+		else
+			lsd = LINK_1000_MASTER;
+		break;
+	case SPEED_100:
+		if (duplex == DUPLEX_FULL)
+			lsd = LINK_100FD;
+		else
+			lsd = LINK_100HD;
+		break;
+	case SPEED_10:
+		if (duplex == DUPLEX_FULL)
+			lsd = LINK_10FD;
+		else
+			lsd = LINK_10HD;
+		break;
+	default:
+		lsd = -EINVAL;
+	}
+
+	return lsd;
+}
+
 static int lan743x_sgmii_mpll_set(struct lan743x_adapter *adapter,
 				  u16 baud)
 {
@@ -1041,26 +1078,7 @@ static int lan743x_sgmii_2_5G_mode_set(struct lan743x_adapter *adapter,
 					      VR_MII_BAUD_RATE_1P25GBPS);
 }
 
-static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter,
-				      bool *status)
-{
-	int ret;
-
-	ret = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
-				 VR_MII_GEN2_4_MPLL_CTRL1);
-	if (ret < 0)
-		return ret;
-
-	if (ret == VR_MII_MPLL_MULTIPLIER_125 ||
-	    ret == VR_MII_MPLL_MULTIPLIER_50)
-		*status = true;
-	else
-		*status = false;
-
-	return 0;
-}
-
-static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter)
+static int lan743x_serdes_clock_and_aneg_update(struct lan743x_adapter *adapter)
 {
 	enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd;
 	int mii_ctrl;
@@ -1147,68 +1165,11 @@ static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
 	return 0;
 }
 
-static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
+static int lan743x_pcs_power_reset(struct lan743x_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
-	struct phy_device *phydev = netdev->phydev;
-	enum lan743x_sgmii_lsd lsd = POWER_DOWN;
 	int mii_ctl;
-	bool status;
 	int ret;
 
-	switch (phydev->speed) {
-	case SPEED_2500:
-		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
-			lsd = LINK_2500_MASTER;
-		else
-			lsd = LINK_2500_SLAVE;
-		break;
-	case SPEED_1000:
-		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
-			lsd = LINK_1000_MASTER;
-		else
-			lsd = LINK_1000_SLAVE;
-		break;
-	case SPEED_100:
-		if (phydev->duplex)
-			lsd = LINK_100FD;
-		else
-			lsd = LINK_100HD;
-		break;
-	case SPEED_10:
-		if (phydev->duplex)
-			lsd = LINK_10FD;
-		else
-			lsd = LINK_10HD;
-		break;
-	default:
-		netif_err(adapter, drv, adapter->netdev,
-			  "Invalid speed %d\n", phydev->speed);
-		return -EINVAL;
-	}
-
-	adapter->sgmii_lsd = lsd;
-	ret = lan743x_sgmii_aneg_update(adapter);
-	if (ret < 0) {
-		netif_err(adapter, drv, adapter->netdev,
-			  "error %d SGMII cfg failed\n", ret);
-		return ret;
-	}
-
-	ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
-	if (ret < 0) {
-		netif_err(adapter, drv, adapter->netdev,
-			  "error %d SGMII get mode failed\n", ret);
-		return ret;
-	}
-
-	if (status)
-		netif_dbg(adapter, drv, adapter->netdev,
-			  "SGMII 2.5G mode enable\n");
-	else
-		netif_dbg(adapter, drv, adapter->netdev,
-			  "SGMII 1G mode enable\n");
-
 	/* SGMII/1000/2500BASE-X PCS power down */
 	mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
 	if (mii_ctl < 0)
@@ -1229,11 +1190,7 @@ static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
 	if (ret < 0)
 		return ret;
 
-	ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+	return lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
 }
 
 static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
@@ -1389,103 +1346,11 @@ static int lan743x_phy_reset(struct lan743x_adapter *adapter)
 				  50000, 1000000);
 }
 
-static void lan743x_phy_update_flowcontrol(struct lan743x_adapter *adapter,
-					   u16 local_adv, u16 remote_adv)
-{
-	struct lan743x_phy *phy = &adapter->phy;
-	u8 cap;
-
-	if (phy->fc_autoneg)
-		cap = mii_resolve_flowctrl_fdx(local_adv, remote_adv);
-	else
-		cap = phy->fc_request_control;
-
-	lan743x_mac_flow_ctrl_set_enables(adapter,
-					  cap & FLOW_CTRL_TX,
-					  cap & FLOW_CTRL_RX);
-}
-
 static int lan743x_phy_init(struct lan743x_adapter *adapter)
 {
 	return lan743x_phy_reset(adapter);
 }
 
-static void lan743x_phy_link_status_change(struct net_device *netdev)
-{
-	struct lan743x_adapter *adapter = netdev_priv(netdev);
-	struct phy_device *phydev = netdev->phydev;
-	u32 data;
-
-	phy_print_status(phydev);
-	if (phydev->state == PHY_RUNNING) {
-		int remote_advertisement = 0;
-		int local_advertisement = 0;
-
-		data = lan743x_csr_read(adapter, MAC_CR);
-
-		/* set duplex mode */
-		if (phydev->duplex)
-			data |= MAC_CR_DPX_;
-		else
-			data &= ~MAC_CR_DPX_;
-
-		/* set bus speed */
-		switch (phydev->speed) {
-		case SPEED_10:
-			data &= ~MAC_CR_CFG_H_;
-			data &= ~MAC_CR_CFG_L_;
-		break;
-		case SPEED_100:
-			data &= ~MAC_CR_CFG_H_;
-			data |= MAC_CR_CFG_L_;
-		break;
-		case SPEED_1000:
-			data |= MAC_CR_CFG_H_;
-			data &= ~MAC_CR_CFG_L_;
-		break;
-		case SPEED_2500:
-			data |= MAC_CR_CFG_H_;
-			data |= MAC_CR_CFG_L_;
-		break;
-		}
-		lan743x_csr_write(adapter, MAC_CR, data);
-
-		local_advertisement =
-			linkmode_adv_to_mii_adv_t(phydev->advertising);
-		remote_advertisement =
-			linkmode_adv_to_mii_adv_t(phydev->lp_advertising);
-
-		lan743x_phy_update_flowcontrol(adapter, local_advertisement,
-					       remote_advertisement);
-		lan743x_ptp_update_latency(adapter, phydev->speed);
-		if (phydev->interface == PHY_INTERFACE_MODE_SGMII ||
-		    phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
-		    phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
-			lan743x_sgmii_config(adapter);
-
-		data = lan743x_csr_read(adapter, MAC_CR);
-		if (phydev->enable_tx_lpi)
-			data |=  MAC_CR_EEE_EN_;
-		else
-			data &= ~MAC_CR_EEE_EN_;
-		lan743x_csr_write(adapter, MAC_CR, data);
-	}
-}
-
-static void lan743x_phy_close(struct lan743x_adapter *adapter)
-{
-	struct net_device *netdev = adapter->netdev;
-	struct phy_device *phydev = netdev->phydev;
-
-	phy_stop(netdev->phydev);
-	phy_disconnect(netdev->phydev);
-
-	/* using phydev here as phy_disconnect NULLs netdev->phydev */
-	if (phy_is_pseudo_fixed_link(phydev))
-		fixed_phy_unregister(phydev);
-
-}
-
 static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
 {
 	u32 id_rev;
@@ -1502,65 +1367,9 @@ static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
 		adapter->phy_interface = PHY_INTERFACE_MODE_MII;
 	else
 		adapter->phy_interface = PHY_INTERFACE_MODE_RGMII;
-}
-
-static int lan743x_phy_open(struct lan743x_adapter *adapter)
-{
-	struct net_device *netdev = adapter->netdev;
-	struct lan743x_phy *phy = &adapter->phy;
-	struct fixed_phy_status fphy_status = {
-		.link = 1,
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_FULL,
-	};
-	struct phy_device *phydev;
-	int ret = -EIO;
-
-	/* try devicetree phy, or fixed link */
-	phydev = of_phy_get_and_connect(netdev, adapter->pdev->dev.of_node,
-					lan743x_phy_link_status_change);
-
-	if (!phydev) {
-		/* try internal phy */
-		phydev = phy_find_first(adapter->mdiobus);
-		if (!phydev)	{
-			if ((adapter->csr.id_rev & ID_REV_ID_MASK_) ==
-					ID_REV_ID_LAN7431_) {
-				phydev = fixed_phy_register(PHY_POLL,
-							    &fphy_status, NULL);
-				if (IS_ERR(phydev)) {
-					netdev_err(netdev, "No PHY/fixed_PHY found\n");
-					return PTR_ERR(phydev);
-				}
-			} else {
-				goto return_error;
-				}
-		}
-
-		lan743x_phy_interface_select(adapter);
-
-		ret = phy_connect_direct(netdev, phydev,
-					 lan743x_phy_link_status_change,
-					 adapter->phy_interface);
-		if (ret)
-			goto return_error;
-	}
-
-	/* MAC doesn't support 1000T Half */
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-
-	/* support both flow controls */
-	phy_support_asym_pause(phydev);
-	phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
-	phy->fc_autoneg = phydev->autoneg;
-
-	phy_start(phydev);
-	phy_start_aneg(phydev);
-	phy_attached_info(phydev);
-	return 0;
 
-return_error:
-	return ret;
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "selected phy interface: 0x%X\n", adapter->phy_interface);
 }
 
 static void lan743x_rfe_open(struct lan743x_adapter *adapter)
@@ -3061,6 +2870,336 @@ return_error:
 	return ret;
 }
 
+static int lan743x_phylink_sgmii_config(struct lan743x_adapter *adapter)
+{
+	u32 sgmii_ctl;
+	int ret;
+
+	ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL,
+			      MASTER_SLAVE_STATE_MASTER);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d link-speed-duplex(LSD) invalid\n", ret);
+		return ret;
+	}
+
+	adapter->sgmii_lsd = ret;
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+	/* LINK_STATUS_SOURCE from the External PHY via SGMII */
+	sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+	sgmii_ctl &= ~SGMII_CTL_LINK_STATUS_SOURCE_;
+	lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
+
+	ret = lan743x_serdes_clock_and_aneg_update(adapter);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d sgmii aneg update failed\n", ret);
+		return ret;
+	}
+
+	return lan743x_pcs_power_reset(adapter);
+}
+
+static int lan743x_phylink_1000basex_config(struct lan743x_adapter *adapter)
+{
+	u32 sgmii_ctl;
+	int ret;
+
+	ret = lan743x_get_lsd(SPEED_1000, DUPLEX_FULL,
+			      MASTER_SLAVE_STATE_MASTER);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d link-speed-duplex(LSD) invalid\n", ret);
+		return ret;
+	}
+
+	adapter->sgmii_lsd = ret;
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+	/* LINK_STATUS_SOURCE from 1000BASE-X PCS link status */
+	sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+	sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_;
+	lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
+
+	ret = lan743x_serdes_clock_and_aneg_update(adapter);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d 1000basex aneg update failed\n", ret);
+		return ret;
+	}
+
+	return lan743x_pcs_power_reset(adapter);
+}
+
+static int lan743x_phylink_2500basex_config(struct lan743x_adapter *adapter)
+{
+	u32 sgmii_ctl;
+	int ret;
+
+	ret = lan743x_get_lsd(SPEED_2500, DUPLEX_FULL,
+			      MASTER_SLAVE_STATE_MASTER);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d link-speed-duplex(LSD) invalid\n", ret);
+		return ret;
+	}
+
+	adapter->sgmii_lsd = ret;
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "Link Speed Duplex (lsd) : 0x%X\n", adapter->sgmii_lsd);
+
+	/* LINK_STATUS_SOURCE from 2500BASE-X PCS link status */
+	sgmii_ctl = lan743x_csr_read(adapter, SGMII_CTL);
+	sgmii_ctl |= SGMII_CTL_LINK_STATUS_SOURCE_;
+	lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
+
+	ret = lan743x_serdes_clock_and_aneg_update(adapter);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d 2500basex aneg update failed\n", ret);
+		return ret;
+	}
+
+	return lan743x_pcs_power_reset(adapter);
+}
+
+void lan743x_mac_eee_enable(struct lan743x_adapter *adapter, bool enable)
+{
+	u32 mac_cr;
+
+	mac_cr = lan743x_csr_read(adapter, MAC_CR);
+	if (enable)
+		mac_cr |= MAC_CR_EEE_EN_;
+	else
+		mac_cr &= ~MAC_CR_EEE_EN_;
+	lan743x_csr_write(adapter, MAC_CR, mac_cr);
+}
+
+static void lan743x_phylink_mac_config(struct phylink_config *config,
+				       unsigned int link_an_mode,
+				       const struct phylink_link_state *state)
+{
+	struct net_device *netdev = to_net_dev(config->dev);
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	int ret;
+
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_2500BASEX:
+		ret = lan743x_phylink_2500basex_config(adapter);
+		if (ret < 0)
+			netif_err(adapter, drv, adapter->netdev,
+				  "2500BASEX config failed. Error %d\n", ret);
+		else
+			netif_dbg(adapter, drv, adapter->netdev,
+				  "2500BASEX mode selected and configured\n");
+		break;
+	case PHY_INTERFACE_MODE_1000BASEX:
+		ret = lan743x_phylink_1000basex_config(adapter);
+		if (ret < 0)
+			netif_err(adapter, drv, adapter->netdev,
+				  "1000BASEX config failed. Error %d\n", ret);
+		else
+			netif_dbg(adapter, drv, adapter->netdev,
+				  "1000BASEX mode selected and configured\n");
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		ret = lan743x_phylink_sgmii_config(adapter);
+		if (ret < 0)
+			netif_err(adapter, drv, adapter->netdev,
+				  "SGMII config failed. Error %d\n", ret);
+		else
+			netif_dbg(adapter, drv, adapter->netdev,
+				  "SGMII mode selected and configured\n");
+		break;
+	default:
+		netif_dbg(adapter, drv, adapter->netdev,
+			  "RGMII/GMII/MII(0x%X) mode enable\n",
+			  state->interface);
+		break;
+	}
+}
+
+static void lan743x_phylink_mac_link_down(struct phylink_config *config,
+					  unsigned int link_an_mode,
+					  phy_interface_t interface)
+{
+	struct net_device *netdev = to_net_dev(config->dev);
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+	netif_tx_stop_all_queues(to_net_dev(config->dev));
+	lan743x_mac_eee_enable(adapter, false);
+}
+
+static void lan743x_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
+					unsigned int link_an_mode,
+					phy_interface_t interface,
+					int speed, int duplex,
+					bool tx_pause, bool rx_pause)
+{
+	struct net_device *netdev = to_net_dev(config->dev);
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	int mac_cr;
+	u8 cap;
+
+	mac_cr = lan743x_csr_read(adapter, MAC_CR);
+	/* Pre-initialize register bits.
+	 * Resulting value corresponds to SPEED_10
+	 */
+	mac_cr &= ~(MAC_CR_CFG_H_ | MAC_CR_CFG_L_);
+	if (speed == SPEED_2500)
+		mac_cr |= MAC_CR_CFG_H_ | MAC_CR_CFG_L_;
+	else if (speed == SPEED_1000)
+		mac_cr |= MAC_CR_CFG_H_;
+	else if (speed == SPEED_100)
+		mac_cr |= MAC_CR_CFG_L_;
+
+	lan743x_csr_write(adapter, MAC_CR, mac_cr);
+
+	lan743x_ptp_update_latency(adapter, speed);
+
+	/* Flow Control operation */
+	cap = 0;
+	if (tx_pause)
+		cap |= FLOW_CTRL_TX;
+	if (rx_pause)
+		cap |= FLOW_CTRL_RX;
+
+	lan743x_mac_flow_ctrl_set_enables(adapter,
+					  cap & FLOW_CTRL_TX,
+					  cap & FLOW_CTRL_RX);
+
+	if (phydev)
+		lan743x_mac_eee_enable(adapter, phydev->enable_tx_lpi);
+
+	netif_tx_wake_all_queues(netdev);
+}
+
+static const struct phylink_mac_ops lan743x_phylink_mac_ops = {
+	.mac_config = lan743x_phylink_mac_config,
+	.mac_link_down = lan743x_phylink_mac_link_down,
+	.mac_link_up = lan743x_phylink_mac_link_up,
+};
+
+static int lan743x_phylink_create(struct lan743x_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct phylink *pl;
+
+	adapter->phylink_config.dev = &netdev->dev;
+	adapter->phylink_config.type = PHYLINK_NETDEV;
+	adapter->phylink_config.mac_managed_pm = false;
+
+	adapter->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
+		MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD;
+
+	lan743x_phy_interface_select(adapter);
+
+	switch (adapter->phy_interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  adapter->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+			  adapter->phylink_config.supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  adapter->phylink_config.supported_interfaces);
+		adapter->phylink_config.mac_capabilities |= MAC_2500FD;
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  adapter->phylink_config.supported_interfaces);
+		break;
+	case PHY_INTERFACE_MODE_MII:
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  adapter->phylink_config.supported_interfaces);
+		break;
+	default:
+		phy_interface_set_rgmii(adapter->phylink_config.supported_interfaces);
+	}
+
+	pl = phylink_create(&adapter->phylink_config, NULL,
+			    adapter->phy_interface, &lan743x_phylink_mac_ops);
+
+	if (IS_ERR(pl)) {
+		netdev_err(netdev, "Could not create phylink (%pe)\n", pl);
+		return PTR_ERR(pl);
+	}
+
+	adapter->phylink = pl;
+	netdev_dbg(netdev, "lan743x phylink created");
+
+	return 0;
+}
+
+static bool lan743x_phy_handle_exists(struct device_node *dn)
+{
+	dn = of_parse_phandle(dn, "phy-handle", 0);
+	of_node_put(dn);
+	return dn != NULL;
+}
+
+static int lan743x_phylink_connect(struct lan743x_adapter *adapter)
+{
+	struct device_node *dn = adapter->pdev->dev.of_node;
+	struct net_device *dev = adapter->netdev;
+	struct phy_device *phydev;
+	int ret;
+
+	if (dn)
+		ret = phylink_of_phy_connect(adapter->phylink, dn, 0);
+
+	if (!dn || (ret && !lan743x_phy_handle_exists(dn))) {
+		phydev = phy_find_first(adapter->mdiobus);
+		if (phydev) {
+			/* attach the mac to the phy */
+			ret = phylink_connect_phy(adapter->phylink, phydev);
+		} else if (((adapter->csr.id_rev & ID_REV_ID_MASK_) ==
+			      ID_REV_ID_LAN7431_) || adapter->is_pci11x1x) {
+			struct phylink_link_state state;
+			unsigned long caps;
+
+			caps = adapter->phylink_config.mac_capabilities;
+			if (caps & MAC_2500FD) {
+				state.speed = SPEED_2500;
+				state.duplex = DUPLEX_FULL;
+			} else if (caps & MAC_1000FD) {
+				state.speed = SPEED_1000;
+				state.duplex = DUPLEX_FULL;
+			} else {
+				state.speed = SPEED_UNKNOWN;
+				state.duplex = DUPLEX_UNKNOWN;
+			}
+
+			ret = phylink_set_fixed_link(adapter->phylink, &state);
+			if (ret) {
+				netdev_err(dev, "Could not set fixed link\n");
+				return ret;
+			}
+		} else {
+			netdev_err(dev, "no PHY found\n");
+			return -ENXIO;
+		}
+	}
+
+	if (ret) {
+		netdev_err(dev, "Could not attach PHY (%d)\n", ret);
+		return ret;
+	}
+
+	phylink_start(adapter->phylink);
+
+	return 0;
+}
+
+static void lan743x_phylink_disconnect(struct lan743x_adapter *adapter)
+{
+	phylink_stop(adapter->phylink);
+	phylink_disconnect_phy(adapter->phylink);
+}
+
 static int lan743x_netdev_close(struct net_device *netdev)
 {
 	struct lan743x_adapter *adapter = netdev_priv(netdev);
@@ -3074,7 +3213,7 @@ static int lan743x_netdev_close(struct net_device *netdev)
 
 	lan743x_ptp_close(adapter);
 
-	lan743x_phy_close(adapter);
+	lan743x_phylink_disconnect(adapter);
 
 	lan743x_mac_close(adapter);
 
@@ -3097,13 +3236,13 @@ static int lan743x_netdev_open(struct net_device *netdev)
 	if (ret)
 		goto close_intr;
 
-	ret = lan743x_phy_open(adapter);
+	ret = lan743x_phylink_connect(adapter);
 	if (ret)
 		goto close_mac;
 
 	ret = lan743x_ptp_open(adapter);
 	if (ret)
-		goto close_phy;
+		goto close_mac;
 
 	lan743x_rfe_open(adapter);
 
@@ -3119,6 +3258,9 @@ static int lan743x_netdev_open(struct net_device *netdev)
 			goto close_tx;
 	}
 
+	if (netdev->phydev)
+		phy_support_eee(netdev->phydev);
+
 #ifdef CONFIG_PM
 	if (adapter->netdev->phydev) {
 		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
@@ -3143,9 +3285,8 @@ close_rx:
 			lan743x_rx_close(&adapter->rx[index]);
 	}
 	lan743x_ptp_close(adapter);
-
-close_phy:
-	lan743x_phy_close(adapter);
+	if (adapter->phylink)
+		lan743x_phylink_disconnect(adapter);
 
 close_mac:
 	lan743x_mac_close(adapter);
@@ -3174,11 +3315,14 @@ static netdev_tx_t lan743x_netdev_xmit_frame(struct sk_buff *skb,
 static int lan743x_netdev_ioctl(struct net_device *netdev,
 				struct ifreq *ifr, int cmd)
 {
+	struct lan743x_adapter *adapter = netdev_priv(netdev);
+
 	if (!netif_running(netdev))
 		return -EINVAL;
 	if (cmd == SIOCSHWTSTAMP)
 		return lan743x_ptp_ioctl(netdev, ifr, cmd);
-	return phy_mii_ioctl(netdev->phydev, ifr, cmd);
+
+	return phylink_mii_ioctl(adapter->phylink, ifr, cmd);
 }
 
 static void lan743x_netdev_set_multicast(struct net_device *netdev)
@@ -3283,10 +3427,17 @@ static void lan743x_mdiobus_cleanup(struct lan743x_adapter *adapter)
 	mdiobus_unregister(adapter->mdiobus);
 }
 
+static void lan743x_destroy_phylink(struct lan743x_adapter *adapter)
+{
+	phylink_destroy(adapter->phylink);
+	adapter->phylink = NULL;
+}
+
 static void lan743x_full_cleanup(struct lan743x_adapter *adapter)
 {
 	unregister_netdev(adapter->netdev);
 
+	lan743x_destroy_phylink(adapter);
 	lan743x_mdiobus_cleanup(adapter);
 	lan743x_hardware_cleanup(adapter);
 	lan743x_pci_cleanup(adapter);
@@ -3500,14 +3651,21 @@ static int lan743x_pcidev_probe(struct pci_dev *pdev,
 				    NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
 	adapter->netdev->hw_features = adapter->netdev->features;
 
-	/* carrier off reporting is important to ethtool even BEFORE open */
-	netif_carrier_off(netdev);
+	ret = lan743x_phylink_create(adapter);
+	if (ret < 0) {
+		netif_err(adapter, probe, netdev,
+			  "failed to setup phylink (%d)\n", ret);
+		goto cleanup_mdiobus;
+	}
 
 	ret = register_netdev(adapter->netdev);
 	if (ret < 0)
-		goto cleanup_mdiobus;
+		goto cleanup_phylink;
 	return 0;
 
+cleanup_phylink:
+	lan743x_destroy_phylink(adapter);
+
 cleanup_mdiobus:
 	lan743x_mdiobus_cleanup(adapter);
 
@@ -3763,6 +3921,7 @@ static int lan743x_pm_resume(struct device *dev)
 	       MAC_WK_SRC_WK_FR_SAVED_;
 	lan743x_csr_write(adapter, MAC_WK_SRC, data);
 
+	rtnl_lock();
 	/* open netdev when netdev is at running state while resume.
 	 * For instance, it is true when system wakesup after pm-suspend
 	 * However, it is false when system wakes up after suspend GUI menu
@@ -3771,6 +3930,7 @@ static int lan743x_pm_resume(struct device *dev)
 		lan743x_netdev_open(netdev);
 
 	netif_device_attach(netdev);
+	rtnl_unlock();
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 3b2585a384e2..8ef897c114d3 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -5,6 +5,7 @@
 #define _LAN743X_H
 
 #include <linux/phy.h>
+#include <linux/phylink.h>
 #include "lan743x_ptp.h"
 
 #define DRIVER_AUTHOR   "Bryan Whitehead <Bryan.Whitehead@microchip.com>"
@@ -1083,6 +1084,8 @@ struct lan743x_adapter {
 	u32			flags;
 	u32			hw_cfg;
 	phy_interface_t		phy_interface;
+	struct phylink		*phylink;
+	struct phylink_config	phylink_config;
 };
 
 #define LAN743X_COMPONENT_FLAG_RX(channel)  BIT(20 + (channel))
@@ -1203,5 +1206,6 @@ void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
 void lan743x_mac_flow_ctrl_set_enables(struct lan743x_adapter *adapter,
 				       bool tx_enable, bool rx_enable);
 int lan743x_sgmii_read(struct lan743x_adapter *adapter, u8 mmd, u16 addr);
+void lan743x_mac_eee_enable(struct lan743x_adapter *adapter, bool enable);
 
 #endif /* _LAN743X_H */
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ab4e9fc03017..4309317de3d1 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1636,6 +1636,48 @@ static int phylink_register_sfp(struct phylink *pl,
 }
 
 /**
+ * phylink_set_fixed_link() - set the fixed link
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @state: a pointer to a struct phylink_link_state.
+ *
+ * This function is used when the link parameters are known and do not change,
+ * making it suitable for certain types of network connections.
+ *
+ * Returns: zero on success or negative error code.
+ */
+int phylink_set_fixed_link(struct phylink *pl,
+			   const struct phylink_link_state *state)
+{
+	const struct phy_setting *s;
+	unsigned long *adv;
+
+	if (pl->cfg_link_an_mode != MLO_AN_PHY || !state ||
+	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
+		return -EINVAL;
+
+	s = phy_lookup_setting(state->speed, state->duplex,
+			       pl->supported, true);
+	if (!s)
+		return -EINVAL;
+
+	adv = pl->link_config.advertising;
+	linkmode_zero(adv);
+	linkmode_set_bit(s->bit, adv);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, adv);
+
+	pl->link_config.speed = state->speed;
+	pl->link_config.duplex = state->duplex;
+	pl->link_config.link = 1;
+	pl->link_config.an_complete = 1;
+
+	pl->cfg_link_an_mode = MLO_AN_FIXED;
+	pl->cur_link_an_mode = pl->cfg_link_an_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_set_fixed_link);
+
+/**
  * phylink_create() - create a phylink instance
  * @config: a pointer to the target &struct phylink_config
  * @fwnode: a pointer to a &struct fwnode_handle describing the network
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 2381e07429a2..5c01048860c4 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -598,6 +598,8 @@ int phylink_fwnode_phy_connect(struct phylink *pl,
 			       const struct fwnode_handle *fwnode,
 			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
+int phylink_set_fixed_link(struct phylink *,
+			   const struct phylink_link_state *);
 
 void phylink_mac_change(struct phylink *, bool up);
 void phylink_pcs_change(struct phylink_pcs *, bool up);