diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-06-18 22:53:34 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-06-18 22:53:34 +0400 |
commit | 9023a4093d6594040fb8142cdd2615d3461caa7a (patch) | |
tree | fe8c5e925070fa043fd95419dffb29094f706dfc | |
parent | 1bea57f5f38809e2d3e0fe58ab01362c05232777 (diff) | |
parent | a3e545e9ab26892641ecac7cee30ea4b4e87977e (diff) | |
download | linux-9023a4093d6594040fb8142cdd2615d3461caa7a.tar.xz |
Merge tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC fixes from Chris Ball:
- atmel-mci: Fixes for NULL timer and DMA burst/chunk size
- dw_mmc: Fix DMA ordering, clkdiv calculation, NULL host->data
- mxs_mmc: Compile fix for CONFIG_OF=y && CONFIG_PM=n
- omap: Fix NULL deref in mmc_omap_remove_slot(), reg_shift initialization
- sdhci-s3c: Fix boot regression by adding IRQF_ONESHOT flag
- Small fixes to core/sd, core/sdio, sdhci
* tag 'mmc-fixes-for-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: mxs-mmc: Move of_match_table out of CONFIG_PM
mmc: sdhci-s3c: pass IRQF ONESHOT to request threaded irq
mmc: core: return an error on suspend if mmc_deselect_cards fails
mmc: omap: Fix broken reg_shift initialization
mmc: omap: Fix NULL pointer dereference if mmc_omap_new_slot() fails
mmc: omap: Fix a section warning regression
mmc: dw_mmc: correct the calculation for CLKDIV
mmc: dw_mmc: fix incorrect setting of host->data of NULL
mmc: dw_mmc: fix the IDMAC sw reset
mmc: dw_mmc: fix the transmission handling in IDMAC
mmc: sdio: fix setting card data bus width as 4-bit
mmc: atmel-mci: fix burst/chunk size modification
mmc: atmel-mci: fix data timeout issue
mmc: sdhci: Use DBG() instead of pr_warning() on large timeout
-rw-r--r-- | drivers/mmc/core/mmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/core/sd.c | 6 | ||||
-rw-r--r-- | drivers/mmc/core/sdio.c | 6 | ||||
-rw-r--r-- | drivers/mmc/host/atmel-mci-regs.h | 14 | ||||
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 12 | ||||
-rw-r--r-- | drivers/mmc/host/dw_mmc.c | 36 | ||||
-rw-r--r-- | drivers/mmc/host/mxs-mmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/omap.c | 18 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-s3c.c | 2 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.c | 4 | ||||
-rw-r--r-- | include/linux/mmc/sdio.h | 2 |
11 files changed, 66 insertions, 38 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2d4a4b746750..258b203397aa 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1326,7 +1326,7 @@ static int mmc_suspend(struct mmc_host *host) if (!err) mmc_card_set_sleep(host->card); } else if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_release_host(host); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index c272c6868ecf..b2b43f624b9e 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1075,16 +1075,18 @@ static void mmc_sd_detect(struct mmc_host *host) */ static int mmc_sd_suspend(struct mmc_host *host) { + int err = 0; + BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); if (!mmc_host_is_spi(host)) - mmc_deselect_cards(host); + err = mmc_deselect_cards(host); host->card->state &= ~MMC_STATE_HIGHSPEED; mmc_release_host(host); - return 0; + return err; } /* diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 13d0e95380ab..41c5fd8848f4 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -218,6 +218,12 @@ static int sdio_enable_wide(struct mmc_card *card) if (ret) return ret; + if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) + pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); + + /* set as 4-bit bus width */ + ctrl &= ~SDIO_BUS_WIDTH_MASK; ctrl |= SDIO_BUS_WIDTH_4BIT; ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 787aba1682bb..ab56f7db5315 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -140,4 +140,18 @@ #define atmci_writel(port,reg,value) \ __raw_writel((value), (port)->regs + reg) +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(unsigned int maxburst) +{ + if (maxburst > 1) + return fls(maxburst) - 2; + else + return 0; +} + #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 420aca642b14..f2c115e06438 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -910,6 +910,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) enum dma_data_direction direction; enum dma_transfer_direction slave_dirn; unsigned int sglen; + u32 maxburst; u32 iflags; data->error = -EINPROGRESS; @@ -943,17 +944,18 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; - if (host->caps.has_dma) - atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN); - if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; + maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); } else { direction = DMA_TO_DEVICE; host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; + maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); } + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN); + sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); @@ -2314,6 +2316,8 @@ static int __init atmci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + /* We need at least one slot to succeed */ nr_slots = 0; ret = -ENODEV; @@ -2352,8 +2356,6 @@ static int __init atmci_probe(struct platform_device *pdev) } } - setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); - dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 9bbf45f8c538..1ca5e72ceb65 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -418,6 +418,8 @@ static int dw_mci_idmac_init(struct dw_mci *host) p->des3 = host->sg_dma; p->des0 = IDMAC_DES0_ER; + mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET); + /* Mask out interrupts - get Tx & Rx complete only */ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI); @@ -615,14 +617,15 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot) u32 div; if (slot->clock != host->current_speed) { - if (host->bus_hz % slot->clock) + div = host->bus_hz / slot->clock; + if (host->bus_hz % slot->clock && host->bus_hz > slot->clock) /* * move the + 1 after the divide to prevent * over-clocking the card. */ - div = ((host->bus_hz / slot->clock) >> 1) + 1; - else - div = (host->bus_hz / slot->clock) >> 1; + div += 1; + + div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0; dev_info(&slot->mmc->class_dev, "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ" @@ -939,8 +942,8 @@ static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd mdelay(20); if (cmd->data) { - host->data = NULL; dw_mci_stop_dma(host); + host->data = NULL; } } } @@ -1623,7 +1626,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); - set_bit(EVENT_DATA_COMPLETE, &host->pending_events); host->dma_ops->complete(host); } #endif @@ -1725,7 +1727,8 @@ static void dw_mci_work_routine_card(struct work_struct *work) #ifdef CONFIG_MMC_DW_IDMAC ctrl = mci_readl(host, BMOD); - ctrl |= 0x01; /* Software reset of DMA */ + /* Software reset of DMA */ + ctrl |= SDMMC_IDMAC_SWRESET; mci_writel(host, BMOD, ctrl); #endif @@ -1950,10 +1953,6 @@ int dw_mci_probe(struct dw_mci *host) spin_lock_init(&host->lock); INIT_LIST_HEAD(&host->queue); - - host->dma_ops = host->pdata->dma_ops; - dw_mci_init_dma(host); - /* * Get the host data width - this assumes that HCON has been set with * the correct values. @@ -1981,10 +1980,11 @@ int dw_mci_probe(struct dw_mci *host) } /* Reset all blocks */ - if (!mci_wait_reset(&host->dev, host)) { - ret = -ENODEV; - goto err_dmaunmap; - } + if (!mci_wait_reset(&host->dev, host)) + return -ENODEV; + + host->dma_ops = host->pdata->dma_ops; + dw_mci_init_dma(host); /* Clear the interrupts for the host controller */ mci_writel(host, RINTSTS, 0xFFFFFFFF); @@ -2170,14 +2170,14 @@ int dw_mci_resume(struct dw_mci *host) if (host->vmmc) regulator_enable(host->vmmc); - if (host->dma_ops->init) - host->dma_ops->init(host); - if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; return ret; } + if (host->dma_ops->init) + host->dma_ops->init(host); + /* Restore the old value at FIFOTH register */ mci_writel(host, FIFOTH, host->fifoth_val); diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 34a90266ab11..277161d279b8 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -894,8 +894,8 @@ static struct platform_driver mxs_mmc_driver = { .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &mxs_mmc_pm_ops, - .of_match_table = mxs_mmc_dt_ids, #endif + .of_match_table = mxs_mmc_dt_ids, }, }; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 552196c764d4..3e8dcf8d2e05 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1300,7 +1300,7 @@ static const struct mmc_host_ops mmc_omap_ops = { .set_ios = mmc_omap_set_ios, }; -static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) +static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id) { struct mmc_omap_slot *slot = NULL; struct mmc_host *mmc; @@ -1485,24 +1485,26 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev) } host->nr_slots = pdata->nr_slots; + host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); + + host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); + if (!host->mmc_omap_wq) + goto err_plat_cleanup; + for (i = 0; i < pdata->nr_slots; i++) { ret = mmc_omap_new_slot(host, i); if (ret < 0) { while (--i >= 0) mmc_omap_remove_slot(host->slots[i]); - goto err_plat_cleanup; + goto err_destroy_wq; } } - host->reg_shift = (cpu_is_omap7xx() ? 1 : 2); - - host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0); - if (!host->mmc_omap_wq) - goto err_plat_cleanup; - return 0; +err_destroy_wq: + destroy_workqueue(host->mmc_omap_wq); err_plat_cleanup: if (pdata->cleanup) pdata->cleanup(&pdev->dev); diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 55a164fcaa15..a50c205ea208 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -404,7 +404,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc) if (sc->ext_cd_irq && request_threaded_irq(sc->ext_cd_irq, NULL, sdhci_s3c_gpio_card_detect_thread, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(dev), sc) == 0) { int status = gpio_get_value(sc->ext_cd_gpio); if (pdata->ext_cd_gpio_invert) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index e626732aff77..f4b8b4db3a9a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -680,8 +680,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n", - mmc_hostname(host->mmc), count, cmd->opcode); + DBG("%s: Too large timeout 0x%x requested for CMD%d!\n", + mmc_hostname(host->mmc), count, cmd->opcode); count = 0xE; } diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index c9fe66c58f8f..17446d3c3602 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -98,7 +98,9 @@ #define SDIO_CCCR_IF 0x07 /* bus interface controls */ +#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */ #define SDIO_BUS_WIDTH_1BIT 0x00 +#define SDIO_BUS_WIDTH_RESERVED 0x01 #define SDIO_BUS_WIDTH_4BIT 0x02 #define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ #define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ |