r6040: Fix kmemleak in probe and remove

There is a memory leaks reported by kmemleak:

  unreferenced object 0xffff888116111000 (size 2048):
    comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
    hex dump (first 32 bytes):
      00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff  ................
      08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
      [<ffffffff827e20ee>] phy_device_create+0x4e/0x90
      [<ffffffff827e6072>] get_phy_device+0xd2/0x220
      [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
      [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
      [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
      ...

The problem occurs in probe process as follows:
  r6040_init_one:
    mdiobus_register
      mdiobus_scan    <- alloc and register phy_device,
                         the reference count of phy_device is 3
    r6040_mii_probe
      phy_connect     <- connect to the first phy_device,
                         so the reference count of the first
                         phy_device is 4, others are 3
    register_netdev   <- fault inject succeeded, goto error handling path

    // error handling path
    err_out_mdio_unregister:
      mdiobus_unregister(lp->mii_bus);
    err_out_mdio:
      mdiobus_free(lp->mii_bus);    <- the reference count of the first
                                       phy_device is 1, it is not released
                                       and other phy_devices are released
  // similarly, the remove process also has the same problem

The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.

Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.

Fixes: 3831861b4ad8 ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

1 files changed, 4 insertions, 1 deletions

diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index eecd52ed1ed2..f4d434c379e7 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -1159,10 +1159,12 @@ static int r6040_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	err = register_netdev(dev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to register net device\n");
-		goto err_out_mdio_unregister;
+		goto err_out_phy_disconnect;
 	}
 	return 0;
 
+err_out_phy_disconnect:
+	phy_disconnect(dev->phydev);
 err_out_mdio_unregister:
 	mdiobus_unregister(lp->mii_bus);
 err_out_mdio:
@@ -1186,6 +1188,7 @@ static void r6040_remove_one(struct pci_dev *pdev)
 	struct r6040_private *lp = netdev_priv(dev);
 
 	unregister_netdev(dev);
+	phy_disconnect(dev->phydev);
 	mdiobus_unregister(lp->mii_bus);
 	mdiobus_free(lp->mii_bus);
 	netif_napi_del(&lp->napi);