diff options
| author | Mark Langsdorf <mark.langsdorf@calxeda.com> | 2013-08-14 22:23:32 +0400 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2013-08-15 00:43:30 +0400 |
| commit | 2b79c56fb41d3956f672990fe83e342a809c89ab (patch) | |
| tree | 4de09de58eeffe51d987fca8a94d4897e348b542 | |
| parent | b2e4c7b94e2826bea435aa3107e7c44f3e68515b (diff) | |
| download | linux-2b79c56fb41d3956f672990fe83e342a809c89ab.tar.xz | |
sata, highbank: send extra clock cycles in SGPIO patterns
Some SGPIO PICs don't follow the standard very well and expect a certain
number of clock cycles or port frames in each SGPIO pattern. Add two
optional parameters in the DTB that can provide the number of extra
clock cycles to be sent before and after SGPIO pattern. Read those
parameters from the DTB and send the extra clock cycles.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
| -rw-r--r-- | Documentation/devicetree/bindings/ata/sata_highbank.txt | 6 | ||||
| -rw-r--r-- | drivers/ata/sata_highbank.c | 13 |
2 files changed, 19 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt index c84833e13363..aa83407cb7a4 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt @@ -23,6 +23,10 @@ Optional properties: - calxeda,tx-atten : a u32 array that contains TX attenuation override codes, one per port. The upper 3 bytes are always 0 and thus ignored. +- calxeda,pre-clocks : a u32 that indicates the number of additional clock + cycles to transmit before sending an SGPIO pattern +- calxeda,post-clocks: a u32 that indicates the number of additional clock + cycles to transmit after sending an SGPIO pattern Example: sata@ffe08000 { @@ -35,4 +39,6 @@ Example: calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; calxeda,led-order = <4 0 1 2 3>; calxeda,tx-atten = <0xff 22 0xff 0xff 23>; + calxeda,pre-clocks = <10>; + calxeda,post-clocks = <0>; }; diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index ba43c7217545..0849672218c9 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -84,6 +84,9 @@ static DEFINE_SPINLOCK(sgpio_lock); struct ecx_plat_data { u32 n_ports; + /* number of extra clocks that the SGPIO PIC controller expects */ + u32 pre_clocks; + u32 post_clocks; unsigned sgpio_gpio[SGPIO_PINS]; u32 sgpio_pattern; u32 port_to_sgpio[SGPIO_PORTS]; @@ -160,6 +163,9 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, spin_lock_irqsave(&sgpio_lock, flags); ecx_parse_sgpio(pdata, ap->port_no, state); sgpio_out = pdata->sgpio_pattern; + for (i = 0; i < pdata->pre_clocks; i++) + ecx_led_cycle_clock(pdata); + gpio_set_value(pdata->sgpio_gpio[SLOAD], 1); ecx_led_cycle_clock(pdata); gpio_set_value(pdata->sgpio_gpio[SLOAD], 0); @@ -172,6 +178,8 @@ static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state, sgpio_out >>= 1; ecx_led_cycle_clock(pdata); } + for (i = 0; i < pdata->post_clocks; i++) + ecx_led_cycle_clock(pdata); /* save off new led state for port/slot */ emp->led_state = state; @@ -206,6 +214,11 @@ static void highbank_set_em_messages(struct device *dev, of_property_read_u32_array(np, "calxeda,led-order", pdata->port_to_sgpio, pdata->n_ports); + if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks)) + pdata->pre_clocks = 0; + if (of_property_read_u32(np, "calxeda,post-clocks", + &pdata->post_clocks)) + pdata->post_clocks = 0; /* store em_loc */ hpriv->em_loc = 0; |