diff options
author | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2008-02-01 02:13:34 +0300 |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-02-08 03:02:33 +0300 |
commit | 0bb67f181834044db6e9b15c7d5cc3cce0489bfd (patch) | |
tree | 028d0c510e8f219c660c4369e32bb6bc8d556ab1 | |
parent | f8d9d654fcc7dd87f5d0b222e233eaab15d650c4 (diff) | |
download | linux-0bb67f181834044db6e9b15c7d5cc3cce0489bfd.tar.xz |
[SCSI] sun3x_esp: convert to esp_scsi
Converted sun3x_esp driver to use esp_scsi.c
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-rw-r--r-- | drivers/scsi/Kconfig | 1 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 2 | ||||
-rw-r--r-- | drivers/scsi/sun3x_esp.c | 546 |
3 files changed, 237 insertions, 312 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 14fc7f39e83e..fa86f340cbb3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1779,6 +1779,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" depends on SUN3X && SCSI=y + select SCSI_SPI_ATTRS help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 93e1428d03fc..999327dbbede 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -118,7 +118,7 @@ obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_IMM) += imm.o obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o -obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o +obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c index 1bc41907a038..06152c7fa689 100644 --- a/drivers/scsi/sun3x_esp.c +++ b/drivers/scsi/sun3x_esp.c @@ -1,392 +1,316 @@ -/* sun3x_esp.c: EnhancedScsiProcessor Sun3x SCSI driver code. +/* sun3x_esp.c: ESP front-end for Sun3x systems. * - * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * Based on David S. Miller's esp driver + * Copyright (C) 2007,2008 Thomas Bogendoerfer (tsbogend@alpha.franken.de) */ #include <linux/kernel.h> #include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> #include <linux/delay.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - #include <asm/sun3x.h> +#include <asm/io.h> +#include <asm/dma.h> #include <asm/dvma.h> -#include <asm/irq.h> - -static void dma_barrier(struct NCR_ESP *esp); -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_drain(struct NCR_ESP *esp); -static void dma_invalidate(struct NCR_ESP *esp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_reset(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_advance_sg (Scsi_Cmnd *sp); - -/* Detecting ESP chips on the machine. This is the simple and easy - * version. - */ -int sun3x_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct ConfigDev *esp_dev; - - esp_dev = 0; - esp = esp_allocate(tpnt, esp_dev, 0); - - /* Do command transfer with DMA */ - esp->do_pio_cmds = 0; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = &dma_barrier; - esp->dma_invalidate = &dma_invalidate; - esp->dma_drain = &dma_drain; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = 0; - esp->dma_led_off = 0; - esp->dma_poll = &dma_poll; - esp->dma_reset = &dma_reset; - - /* virtual DMA functions */ - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; - esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; - esp->dma_advance_sg = &dma_advance_sg; - - /* SCSI chip speed */ - esp->cfreq = 20000000; - esp->eregs = (struct ESP_regs *)(SUN3X_ESP_BASE); - esp->dregs = (void *)SUN3X_ESP_DMA; - esp->esp_command = (volatile unsigned char *)dvma_malloc(DVMA_PAGE_SIZE); - esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command); - - esp->irq = 2; - if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, - "SUN3X SCSI", esp->ehost)) { - esp_deallocate(esp); - return 0; - } +/* DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - esp->scsi_id = 7; - esp->diff = 0; +#include <scsi/scsi_host.h> - esp_initialize(esp); +#include "esp_scsi.h" - /* for reasons beyond my knowledge (and which should likely be fixed) - sync mode doesn't work on a 3/80 at 5mhz. but it does at 4. */ - esp->sync_defp = 0x3f; +#define DRV_MODULE_NAME "sun3x_esp" +#define PFX DRV_MODULE_NAME ": " +#define DRV_VERSION "1.000" +#define DRV_MODULE_RELDATE "Nov 1, 2007" - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, - esps_in_use); - esps_running = esps_in_use; - return esps_in_use; +/* + * m68k always assumes readl/writel operate on little endian + * mmio space; this is wrong at least for Sun3x, so we + * need to workaround this until a proper way is found + */ +#if 0 +#define dma_read32(REG) \ + readl(esp->dma_regs + (REG)) +#define dma_write32(VAL, REG) \ + writel((VAL), esp->dma_regs + (REG)) +#else +#define dma_read32(REG) \ + *(volatile u32 *)(esp->dma_regs + (REG)) +#define dma_write32(VAL, REG) \ + do { *(volatile u32 *)(esp->dma_regs + (REG)) = (VAL); } while (0) +#endif + +static void sun3x_esp_write8(struct esp *esp, u8 val, unsigned long reg) +{ + writeb(val, esp->regs + (reg * 4UL)); } -static void dma_do_drain(struct NCR_ESP *esp) +static u8 sun3x_esp_read8(struct esp *esp, unsigned long reg) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - int count = 500000; - - while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - dregs->cond_reg |= DMA_FIFO_STDRAIN; - - count = 500000; - - while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - + return readb(esp->regs + (reg * 4UL)); } - -static void dma_barrier(struct NCR_ESP *esp) + +static dma_addr_t sun3x_esp_map_single(struct esp *esp, void *buf, + size_t sz, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - int count = 500000; - - while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - dregs->cond_reg &= ~(DMA_ENABLE); + return dma_map_single(esp->dev, buf, sz, dir); } -/* This uses various DMA csr fields and the fifo flags count value to - * determine how many bytes were successfully sent/received by the ESP. - */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) +static int sun3x_esp_map_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - int rval = dregs->st_addr - esp->esp_command_dvma; - - return rval - fifo_count; + return dma_map_sg(esp->dev, sg, num_sg, dir); } -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) +static void sun3x_esp_unmap_single(struct esp *esp, dma_addr_t addr, + size_t sz, int dir) { - return sp->SCp.this_residual; + dma_unmap_single(esp->dev, addr, sz, dir); } -static void dma_drain(struct NCR_ESP *esp) +static void sun3x_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - int count = 500000; - - if(dregs->cond_reg & DMA_FIFO_ISDRAIN) { - dregs->cond_reg |= DMA_FIFO_STDRAIN; - while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0)) - udelay(1); - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - } + dma_unmap_sg(esp->dev, sg, num_sg, dir); } -static void dma_invalidate(struct NCR_ESP *esp) +static int sun3x_esp_irq_pending(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - __u32 tmp; - int count = 500000; - - while(((tmp = dregs->cond_reg) & DMA_PEND_READ) && (--count > 0)) - udelay(1); + if (dma_read32(DMA_CSR) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) + return 1; + return 0; +} - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } +static void sun3x_esp_reset_dma(struct esp *esp) +{ + u32 val; - dregs->cond_reg = tmp | DMA_FIFO_INV; - dregs->cond_reg &= ~DMA_FIFO_INV; + val = dma_read32(DMA_CSR); + dma_write32(val | DMA_RST_SCSI, DMA_CSR); + dma_write32(val & ~DMA_RST_SCSI, DMA_CSR); + /* Enable interrupts. */ + val = dma_read32(DMA_CSR); + dma_write32(val | DMA_INT_ENAB, DMA_CSR); } -static void dma_dump_state(struct NCR_ESP *esp) +static void sun3x_esp_dma_drain(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; + u32 csr; + int lim; - ESPLOG(("esp%d: dma -- cond_reg<%08lx> addr<%08lx>\n", - esp->esp_id, dregs->cond_reg, dregs->st_addr)); -} + csr = dma_read32(DMA_CSR); + if (!(csr & DMA_FIFO_ISDRAIN)) + return; -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; + dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR); - dregs->st_addr = vaddress; - dregs->cond_reg |= (DMA_ST_WRITE | DMA_ENABLE); + lim = 1000; + while (dma_read32(DMA_CSR) & DMA_FIFO_ISDRAIN) { + if (--lim == 0) { + printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n", + esp->host->unique_id); + break; + } + udelay(1); + } } -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length) +static void sun3x_esp_dma_invalidate(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - /* Set up the DMA counters */ + u32 val; + int lim; + + lim = 1000; + while ((val = dma_read32(DMA_CSR)) & DMA_PEND_READ) { + if (--lim == 0) { + printk(KERN_ALERT PFX "esp%d: DMA will not " + "invalidate!\n", esp->host->unique_id); + break; + } + udelay(1); + } - dregs->st_addr = vaddress; - dregs->cond_reg = ((dregs->cond_reg & ~(DMA_ST_WRITE)) | DMA_ENABLE); + val &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB); + val |= DMA_FIFO_INV; + dma_write32(val, DMA_CSR); + val &= ~DMA_FIFO_INV; + dma_write32(val, DMA_CSR); } -static void dma_ints_off(struct NCR_ESP *esp) +static void sun3x_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, + u32 dma_count, int write, u8 cmd) { - DMA_INTSOFF((struct sparc_dma_registers *) esp->dregs); + u32 csr; + + BUG_ON(!(cmd & ESP_CMD_DMA)); + + sun3x_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); + sun3x_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); + csr = dma_read32(DMA_CSR); + csr |= DMA_ENABLE; + if (write) + csr |= DMA_ST_WRITE; + else + csr &= ~DMA_ST_WRITE; + dma_write32(csr, DMA_CSR); + dma_write32(addr, DMA_ADDR); + + scsi_esp_cmd(esp, cmd); } -static void dma_ints_on(struct NCR_ESP *esp) +static int sun3x_esp_dma_error(struct esp *esp) { - DMA_INTSON((struct sparc_dma_registers *) esp->dregs); -} + u32 csr = dma_read32(DMA_CSR); -static int dma_irq_p(struct NCR_ESP *esp) -{ - return DMA_IRQ_P((struct sparc_dma_registers *) esp->dregs); + if (csr & DMA_HNDL_ERROR) + return 1; + + return 0; } -static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr) +static const struct esp_driver_ops sun3x_esp_ops = { + .esp_write8 = sun3x_esp_write8, + .esp_read8 = sun3x_esp_read8, + .map_single = sun3x_esp_map_single, + .map_sg = sun3x_esp_map_sg, + .unmap_single = sun3x_esp_unmap_single, + .unmap_sg = sun3x_esp_unmap_sg, + .irq_pending = sun3x_esp_irq_pending, + .reset_dma = sun3x_esp_reset_dma, + .dma_drain = sun3x_esp_dma_drain, + .dma_invalidate = sun3x_esp_dma_invalidate, + .send_dma_cmd = sun3x_esp_send_dma_cmd, + .dma_error = sun3x_esp_dma_error, +}; + +static int __devinit esp_sun3x_probe(struct platform_device *dev) { - int count = 50; - dma_do_drain(esp); + struct scsi_host_template *tpnt = &scsi_esp_template; + struct Scsi_Host *host; + struct esp *esp; + struct resource *res; + int err = -ENOMEM; - /* Wait till the first bits settle. */ - while((*(volatile unsigned char *)vaddr == 0xff) && (--count > 0)) - udelay(1); + host = scsi_host_alloc(tpnt, sizeof(struct esp)); + if (!host) + goto fail; - if(!count) { -// printk("%s:%d timeout expire (data %02x)\n", __FILE__, __LINE__, -// esp_read(esp->eregs->esp_fdata)); - //mach_halt(); - vaddr[0] = esp_read(esp->eregs->esp_fdata); - vaddr[1] = esp_read(esp->eregs->esp_fdata); - } + host->max_id = 8; + esp = shost_priv(host); -} + esp->host = host; + esp->dev = dev; + esp->ops = &sun3x_esp_ops; -static int dma_ports_p(struct NCR_ESP *esp) -{ - return (((struct sparc_dma_registers *) esp->dregs)->cond_reg - & DMA_INT_ENAB); -} + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res && !res->start) + goto fail_unlink; -/* Resetting various pieces of the ESP scsi driver chipset/buses. */ -static void dma_reset(struct NCR_ESP *esp) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *)esp->dregs; + esp->regs = ioremap_nocache(res->start, 0x20); + if (!esp->regs) + goto fail_unmap_regs; - /* Punt the DVMA into a known state. */ - dregs->cond_reg |= DMA_RST_SCSI; - dregs->cond_reg &= ~(DMA_RST_SCSI); - DMA_INTSON(dregs); -} + res = platform_get_resource(dev, IORESOURCE_MEM, 1); + if (!res && !res->start) + goto fail_unmap_regs; -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - unsigned long nreg = dregs->cond_reg; + esp->dma_regs = ioremap_nocache(res->start, 0x10); -// printk("dma_setup %c addr %08x cnt %08x\n", -// write ? 'W' : 'R', addr, count); + esp->command_block = dma_alloc_coherent(esp->dev, 16, + &esp->command_block_dma, + GFP_KERNEL); + if (!esp->command_block) + goto fail_unmap_regs_dma; - dma_do_drain(esp); + host->irq = platform_get_irq(dev, 0); + err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, + "SUN3X ESP", esp); + if (err < 0) + goto fail_unmap_command_block; - if(write) - nreg |= DMA_ST_WRITE; - else { - nreg &= ~(DMA_ST_WRITE); - } - - nreg |= DMA_ENABLE; - dregs->cond_reg = nreg; - dregs->st_addr = addr; -} + esp->scsi_id = 7; + esp->host->this_id = esp->scsi_id; + esp->scsi_id_mask = (1 << esp->scsi_id); + esp->cfreq = 20000000; -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.have_data_in = dvma_map((unsigned long)sp->SCp.buffer, - sp->SCp.this_residual); - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in); + dev_set_drvdata(&dev->dev, esp); + + err = scsi_esp_register(esp, &dev->dev); + if (err) + goto fail_free_irq; + + return 0; + +fail_free_irq: + free_irq(host->irq, esp); +fail_unmap_command_block: + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); +fail_unmap_regs_dma: + iounmap(esp->dma_regs); +fail_unmap_regs: + iounmap(esp->regs); +fail_unlink: + scsi_host_put(host); +fail: + return err; } -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) +static int __devexit esp_sun3x_remove(struct platform_device *dev) { - int sz = sp->SCp.buffers_residual; - struct scatterlist *sg = sp->SCp.buffer; - - while (sz >= 0) { - sg[sz].dma_address = dvma_map((unsigned long)sg_virt(&sg[sz]), - sg[sz].length); - sz--; - } - sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address); -} + struct esp *esp = dev_get_drvdata(&dev->dev); + unsigned int irq = esp->host->irq; + u32 val; -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - dvma_unmap((char *)sp->SCp.have_data_in); -} + scsi_esp_unregister(esp); -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; - - while(sz >= 0) { - dvma_unmap((char *)sg[sz].dma_address); - sz--; - } -} + /* Disable interrupts. */ + val = dma_read32(DMA_CSR); + dma_write32(val & ~DMA_INT_ENAB, DMA_CSR); -static void dma_advance_sg (Scsi_Cmnd *sp) -{ - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address); -} + free_irq(irq, esp); + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); -static int sun3x_esp_release(struct Scsi_Host *instance) -{ - /* this code does not support being compiled as a module */ - return 1; + scsi_host_put(esp->host); + return 0; } -static struct scsi_host_template driver_template = { - .proc_name = "sun3x_esp", - .proc_info = &esp_proc_info, - .name = "Sun ESP 100/100a/200", - .detect = sun3x_esp_detect, - .release = sun3x_esp_release, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, +static struct platform_driver esp_sun3x_driver = { + .probe = esp_sun3x_probe, + .remove = __devexit_p(esp_sun3x_remove), + .driver = { + .name = "sun3x_esp", + }, }; +static int __init sun3x_esp_init(void) +{ + return platform_driver_register(&esp_sun3x_driver); +} -#include "scsi_module.c" +static void __exit sun3x_esp_exit(void) +{ + platform_driver_unregister(&esp_sun3x_driver); +} +MODULE_DESCRIPTION("Sun3x ESP SCSI driver"); +MODULE_AUTHOR("Thomas Bogendoerfer (tsbogend@alpha.franken.de)"); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(sun3x_esp_init); +module_exit(sun3x_esp_exit); |