1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* AD3552R Digital <-> Analog converters common header
*
* Copyright 2021-2024 Analog Devices Inc.
* Author: Angelo Dureghello <adureghello@baylibre.com>
*/
#ifndef __DRIVERS_IIO_DAC_AD3552R_H__
#define __DRIVERS_IIO_DAC_AD3552R_H__
/* Register addresses */
/* Primary address space */
#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A 0x00
#define AD3552R_MASK_SOFTWARE_RESET (BIT(7) | BIT(0))
#define AD3552R_MASK_ADDR_ASCENSION BIT(5)
#define AD3552R_MASK_SDO_ACTIVE BIT(4)
#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B 0x01
#define AD3552R_MASK_SINGLE_INST BIT(7)
#define AD3552R_MASK_SHORT_INSTRUCTION BIT(3)
#define AD3552R_REG_ADDR_DEVICE_CONFIG 0x02
#define AD3552R_MASK_DEVICE_STATUS(n) BIT(4 + (n))
#define AD3552R_MASK_CUSTOM_MODES GENMASK(3, 2)
#define AD3552R_MASK_OPERATING_MODES GENMASK(1, 0)
#define AD3552R_REG_ADDR_CHIP_TYPE 0x03
#define AD3552R_MASK_CLASS GENMASK(7, 0)
#define AD3552R_REG_ADDR_PRODUCT_ID_L 0x04
#define AD3552R_REG_ADDR_PRODUCT_ID_H 0x05
#define AD3552R_REG_ADDR_CHIP_GRADE 0x06
#define AD3552R_MASK_GRADE GENMASK(7, 4)
#define AD3552R_MASK_DEVICE_REVISION GENMASK(3, 0)
#define AD3552R_REG_ADDR_SCRATCH_PAD 0x0A
#define AD3552R_REG_ADDR_SPI_REVISION 0x0B
#define AD3552R_REG_ADDR_VENDOR_L 0x0C
#define AD3552R_REG_ADDR_VENDOR_H 0x0D
#define AD3552R_REG_ADDR_STREAM_MODE 0x0E
#define AD3552R_MASK_LENGTH GENMASK(7, 0)
#define AD3552R_REG_ADDR_TRANSFER_REGISTER 0x0F
#define AD3552R_MASK_MULTI_IO_MODE GENMASK(7, 6)
#define AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE BIT(2)
#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C 0x10
#define AD3552R_MASK_CRC_ENABLE \
(GENMASK(7, 6) | GENMASK(1, 0))
#define AD3552R_MASK_STRICT_REGISTER_ACCESS BIT(5)
#define AD3552R_REG_ADDR_INTERFACE_STATUS_A 0x11
#define AD3552R_MASK_INTERFACE_NOT_READY BIT(7)
#define AD3552R_MASK_CLOCK_COUNTING_ERROR BIT(5)
#define AD3552R_MASK_INVALID_OR_NO_CRC BIT(3)
#define AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER BIT(2)
#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS BIT(1)
#define AD3552R_MASK_REGISTER_ADDRESS_INVALID BIT(0)
#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D 0x14
#define AD3552R_MASK_ALERT_ENABLE_PULLUP BIT(6)
#define AD3552R_MASK_MEM_CRC_EN BIT(4)
#define AD3552R_MASK_SDO_DRIVE_STRENGTH GENMASK(3, 2)
#define AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN BIT(1)
#define AD3552R_MASK_SPI_CONFIG_DDR BIT(0)
#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG 0x15
#define AD3552R_MASK_IDUMP_FAST_MODE BIT(6)
#define AD3552R_MASK_SAMPLE_HOLD_DIFF_USER_EN BIT(5)
#define AD3552R_MASK_SAMPLE_HOLD_USER_TRIM GENMASK(4, 3)
#define AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE BIT(2)
#define AD3552R_MASK_REFERENCE_VOLTAGE_SEL GENMASK(1, 0)
#define AD3552R_REG_ADDR_ERR_ALARM_MASK 0x16
#define AD3552R_MASK_REF_RANGE_ALARM BIT(6)
#define AD3552R_MASK_CLOCK_COUNT_ERR_ALARM BIT(5)
#define AD3552R_MASK_MEM_CRC_ERR_ALARM BIT(4)
#define AD3552R_MASK_SPI_CRC_ERR_ALARM BIT(3)
#define AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM BIT(2)
#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM BIT(1)
#define AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM BIT(0)
#define AD3552R_REG_ADDR_ERR_STATUS 0x17
#define AD3552R_MASK_REF_RANGE_ERR_STATUS BIT(6)
#define AD3552R_MASK_STREAM_EXCEEDS_DAC_ERR_STATUS BIT(5)
#define AD3552R_MASK_MEM_CRC_ERR_STATUS BIT(4)
#define AD3552R_MASK_RESET_STATUS BIT(0)
#define AD3552R_REG_ADDR_POWERDOWN_CONFIG 0x18
#define AD3552R_MASK_CH_DAC_POWERDOWN(ch) BIT(4 + (ch))
#define AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch) BIT(ch)
#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE 0x19
#define AD3552R_MASK_CH0_RANGE GENMASK(2, 0)
#define AD3552R_MASK_CH1_RANGE GENMASK(6, 4)
#define AD3552R_MASK_CH_OUTPUT_RANGE GENMASK(7, 0)
#define AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch) \
((ch) ? GENMASK(7, 4) : GENMASK(3, 0))
#define AD3552R_REG_ADDR_CH_OFFSET(ch) (0x1B + (ch) * 2)
#define AD3552R_MASK_CH_OFFSET_BITS_0_7 GENMASK(7, 0)
#define AD3552R_REG_ADDR_CH_GAIN(ch) (0x1C + (ch) * 2)
#define AD3552R_MASK_CH_RANGE_OVERRIDE BIT(7)
#define AD3552R_MASK_CH_GAIN_SCALING_N GENMASK(6, 5)
#define AD3552R_MASK_CH_GAIN_SCALING_P GENMASK(4, 3)
#define AD3552R_MASK_CH_OFFSET_POLARITY BIT(2)
#define AD3552R_MASK_CH_OFFSET_BIT_8 BIT(8)
/*
* Secondary region
* For multibyte registers specify the highest address because the access is
* done in descending order
*/
#define AD3552R_SECONDARY_REGION_START 0x28
#define AD3552R_REG_ADDR_HW_LDAC_16B 0x28
#define AD3552R_REG_ADDR_CH_DAC_16B(ch) (0x2C - (1 - (ch)) * 2)
#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B 0x2E
#define AD3552R_REG_ADDR_CH_SELECT_16B 0x2F
#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B 0x31
#define AD3552R_REG_ADDR_SW_LDAC_16B 0x32
#define AD3552R_REG_ADDR_CH_INPUT_16B(ch) (0x36 - (1 - (ch)) * 2)
/* 3 bytes registers */
#define AD3552R_REG_START_24B 0x37
#define AD3552R_REG_ADDR_HW_LDAC_24B 0x37
#define AD3552R_REG_ADDR_CH_DAC_24B(ch) (0x3D - (1 - (ch)) * 3)
#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B 0x40
#define AD3552R_REG_ADDR_CH_SELECT_24B 0x41
#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B 0x44
#define AD3552R_REG_ADDR_SW_LDAC_24B 0x45
#define AD3552R_REG_ADDR_CH_INPUT_24B(ch) (0x4B - (1 - (ch)) * 3)
#define AD3552R_MAX_CH 2
#define AD3552R_MASK_CH(ch) BIT(ch)
#define AD3552R_MASK_ALL_CH GENMASK(1, 0)
#define AD3552R_MAX_REG_SIZE 3
#define AD3552R_READ_BIT BIT(7)
#define AD3552R_ADDR_MASK GENMASK(6, 0)
#define AD3552R_MASK_DAC_12B GENMASK(15, 4)
#define AD3552R_DEFAULT_CONFIG_B_VALUE 0x8
#define AD3552R_SCRATCH_PAD_TEST_VAL1 0x34
#define AD3552R_SCRATCH_PAD_TEST_VAL2 0xB2
#define AD3552R_GAIN_SCALE 1000
#define AD3552R_LDAC_PULSE_US 100
#define AD3552R_CH0_ACTIVE BIT(0)
#define AD3552R_CH1_ACTIVE BIT(1)
#define AD3552R_MAX_RANGES 5
#define AD3542R_MAX_RANGES 6
#define AD3552R_QUAD_SPI 2
extern const s32 ad3552r_ch_ranges[AD3552R_MAX_RANGES][2];
extern const s32 ad3542r_ch_ranges[AD3542R_MAX_RANGES][2];
enum ad3552r_id {
AD3541R_ID = 0x400b,
AD3542R_ID = 0x4009,
AD3551R_ID = 0x400a,
AD3552R_ID = 0x4008,
};
struct ad3552r_model_data {
const char *model_name;
enum ad3552r_id chip_id;
unsigned int num_hw_channels;
const s32 (*ranges_table)[2];
int num_ranges;
bool requires_output_range;
};
struct ad3552r_ch_data {
s32 scale_int;
s32 scale_dec;
s32 offset_int;
s32 offset_dec;
s16 gain_offset;
u16 rfb;
u8 n;
u8 p;
u8 range;
bool range_override;
};
enum ad3552r_ch_gain_scaling {
/* Gain scaling of 1 */
AD3552R_CH_GAIN_SCALING_1,
/* Gain scaling of 0.5 */
AD3552R_CH_GAIN_SCALING_0_5,
/* Gain scaling of 0.25 */
AD3552R_CH_GAIN_SCALING_0_25,
/* Gain scaling of 0.125 */
AD3552R_CH_GAIN_SCALING_0_125,
};
enum ad3552r_ch_vref_select {
/* Internal source with Vref I/O floating */
AD3552R_INTERNAL_VREF_PIN_FLOATING,
/* Internal source with Vref I/O at 2.5V */
AD3552R_INTERNAL_VREF_PIN_2P5V,
/* External source with Vref I/O as input */
AD3552R_EXTERNAL_VREF_PIN_INPUT
};
enum ad3542r_ch_output_range {
/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
AD3542R_CH_OUTPUT_RANGE_0__2P5V,
/* Range from 0 V to 3 V. Requires Rfb1x connection */
AD3542R_CH_OUTPUT_RANGE_0__3V,
/* Range from 0 V to 5 V. Requires Rfb1x connection */
AD3542R_CH_OUTPUT_RANGE_0__5V,
/* Range from 0 V to 10 V. Requires Rfb2x connection */
AD3542R_CH_OUTPUT_RANGE_0__10V,
/* Range from -2.5 V to 7.5 V. Requires Rfb2x connection */
AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
/* Range from -5 V to 5 V. Requires Rfb2x connection */
AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
};
enum ad3552r_ch_output_range {
/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
AD3552R_CH_OUTPUT_RANGE_0__2P5V,
/* Range from 0 V to 5 V. Requires Rfb1x connection */
AD3552R_CH_OUTPUT_RANGE_0__5V,
/* Range from 0 V to 10 V. Requires Rfb2x connection */
AD3552R_CH_OUTPUT_RANGE_0__10V,
/* Range from -5 V to 5 V. Requires Rfb2x connection */
AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
/* Range from -10 V to 10 V. Requires Rfb4x connection */
AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
};
int ad3552r_get_output_range(struct device *dev,
const struct ad3552r_model_data *model_info,
struct fwnode_handle *child, u32 *val);
int ad3552r_get_custom_gain(struct device *dev, struct fwnode_handle *child,
u8 *gs_p, u8 *gs_n, u16 *rfb, s16 *goffs);
u16 ad3552r_calc_custom_gain(u8 p, u8 n, s16 goffs);
int ad3552r_get_ref_voltage(struct device *dev, u32 *val);
int ad3552r_get_drive_strength(struct device *dev, u32 *val);
void ad3552r_calc_gain_and_offset(struct ad3552r_ch_data *ch_data,
const struct ad3552r_model_data *model_data);
#endif /* __DRIVERS_IIO_DAC_AD3552R_H__ */
|
