1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor
*
* Copyright (c) 2022 9elements GmbH
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pmbus.h>
#include <linux/regulator/driver.h>
#include "pmbus.h"
/*
* The capability command is only supported at page 0. Probing the device while
* the page register is set to 1 will falsely enable PEC support. Disable
* capability probing accordingly, since the PLI1209BC does not have any
* additional capabilities.
*/
static struct pmbus_platform_data pli1209bc_plat_data = {
.flags = PMBUS_NO_CAPABILITY,
};
static int pli1209bc_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
int data;
switch (reg) {
/* PMBUS_READ_POUT uses a direct format with R=0 */
case PMBUS_READ_POUT:
data = pmbus_read_word_data(client, page, phase, reg);
if (data < 0)
return data;
data = sign_extend32(data, 15) * 10;
return clamp_val(data, -32768, 32767) & 0xffff;
/*
* PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
* when the BCM is turned off. Since it is not possible to return
* ENODATA error, return zero instead.
*/
case PMBUS_READ_VOUT:
case PMBUS_READ_TEMPERATURE_1:
data = pmbus_read_word_data(client, page, phase,
PMBUS_STATUS_WORD);
if (data < 0)
return data;
if (data & PB_STATUS_POWER_GOOD_N)
return 0;
return pmbus_read_word_data(client, page, phase, reg);
default:
return -ENODATA;
}
}
#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
static const struct regulator_desc pli1209bc_reg_desc = {
.name = "vout2",
.id = 1,
.of_match = of_match_ptr("vout2"),
.regulators_node = of_match_ptr("regulators"),
.ops = &pmbus_regulator_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
};
#endif
static struct pmbus_driver_info pli1209bc_info = {
.pages = 2,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_CURRENT_IN] = direct,
.format[PSC_CURRENT_OUT] = direct,
.format[PSC_POWER] = direct,
.format[PSC_TEMPERATURE] = direct,
.m[PSC_VOLTAGE_IN] = 1,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = 1,
.m[PSC_VOLTAGE_OUT] = 1,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 1,
.m[PSC_CURRENT_IN] = 1,
.b[PSC_CURRENT_IN] = 0,
.R[PSC_CURRENT_IN] = 3,
.m[PSC_CURRENT_OUT] = 1,
.b[PSC_CURRENT_OUT] = 0,
.R[PSC_CURRENT_OUT] = 2,
.m[PSC_POWER] = 1,
.b[PSC_POWER] = 0,
.R[PSC_POWER] = 1,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 0,
.R[PSC_TEMPERATURE] = 0,
/*
* Page 0 sums up all attributes except voltage readings.
* The pli1209 digital supervisor only contains a single BCM, making
* page 0 redundant.
*/
.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
.read_word_data = pli1209bc_read_word_data,
.write_delay = 250,
#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
.num_regulators = 1,
.reg_desc = &pli1209bc_reg_desc,
#endif
};
static int pli1209bc_probe(struct i2c_client *client)
{
client->dev.platform_data = &pli1209bc_plat_data;
return pmbus_do_probe(client, &pli1209bc_info);
}
static const struct i2c_device_id pli1209bc_id[] = {
{"pli1209bc"},
{}
};
MODULE_DEVICE_TABLE(i2c, pli1209bc_id);
#ifdef CONFIG_OF
static const struct of_device_id pli1209bc_of_match[] = {
{ .compatible = "vicor,pli1209bc" },
{ },
};
MODULE_DEVICE_TABLE(of, pli1209bc_of_match);
#endif
static struct i2c_driver pli1209bc_driver = {
.driver = {
.name = "pli1209bc",
.of_match_table = of_match_ptr(pli1209bc_of_match),
},
.probe = pli1209bc_probe,
.id_table = pli1209bc_id,
};
module_i2c_driver(pli1209bc_driver);
MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@sylv.io>");
MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(PMBUS);
|
