1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2993)
*/
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include "pmbus.h"
#define MP2993_VOUT_OVUV_UINT 125
#define MP2993_VOUT_OVUV_DIV 64
#define MP2993_VIN_LIMIT_UINT 1
#define MP2993_VIN_LIMIT_DIV 8
#define MP2993_READ_VIN_UINT 1
#define MP2993_READ_VIN_DIV 32
#define MP2993_PAGE_NUM 2
#define MP2993_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \
PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \
PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \
PMBUS_HAVE_IIN | \
PMBUS_HAVE_STATUS_VOUT | \
PMBUS_HAVE_STATUS_IOUT | \
PMBUS_HAVE_STATUS_TEMP | \
PMBUS_HAVE_STATUS_INPUT)
#define MP2993_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \
PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \
PMBUS_HAVE_STATUS_VOUT | \
PMBUS_HAVE_STATUS_IOUT | \
PMBUS_HAVE_STATUS_TEMP | \
PMBUS_HAVE_STATUS_INPUT)
/* Converts a linear11 data exponent to a specified value */
static u16 mp2993_linear11_exponent_transfer(u16 word, u16 expect_exponent)
{
s16 exponent, mantissa, target_exponent;
exponent = ((s16)word) >> 11;
mantissa = ((s16)((word & 0x7ff) << 5)) >> 5;
target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11;
if (exponent > target_exponent)
mantissa = mantissa << (exponent - target_exponent);
else
mantissa = mantissa >> (target_exponent - exponent);
return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800);
}
static int
mp2993_set_vout_format(struct i2c_client *client, int page, int format)
{
int ret;
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, format);
}
static int mp2993_identify(struct i2c_client *client, struct pmbus_driver_info *info)
{
int ret;
/* Set vout to direct format for rail1. */
ret = mp2993_set_vout_format(client, 0, PB_VOUT_MODE_DIRECT);
if (ret < 0)
return ret;
/* Set vout to direct format for rail2. */
return mp2993_set_vout_format(client, 1, PB_VOUT_MODE_DIRECT);
}
static int mp2993_read_word_data(struct i2c_client *client, int page, int phase,
int reg)
{
int ret;
switch (reg) {
case PMBUS_VOUT_OV_FAULT_LIMIT:
case PMBUS_VOUT_UV_FAULT_LIMIT:
ret = pmbus_read_word_data(client, page, phase, reg);
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST(ret * MP2993_VOUT_OVUV_UINT, MP2993_VOUT_OVUV_DIV);
break;
case PMBUS_OT_FAULT_LIMIT:
case PMBUS_OT_WARN_LIMIT:
/*
* The MP2993 ot fault limit value and ot warn limit value
* per rail are always the same, so only PMBUS_OT_FAULT_LIMIT
* and PMBUS_OT_WARN_LIMIT register in page 0 are defined to
* indicates the limit value.
*/
ret = pmbus_read_word_data(client, 0, phase, reg);
break;
case PMBUS_READ_VIN:
/* The MP2993 vin scale is (1/32V)/Lsb */
ret = pmbus_read_word_data(client, page, phase, reg);
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)) * MP2993_READ_VIN_UINT,
MP2993_READ_VIN_DIV);
break;
case PMBUS_VIN_OV_FAULT_LIMIT:
case PMBUS_VIN_OV_WARN_LIMIT:
case PMBUS_VIN_UV_WARN_LIMIT:
case PMBUS_VIN_UV_FAULT_LIMIT:
/* The MP2993 vin limit scale is (1/8V)/Lsb */
ret = pmbus_read_word_data(client, page, phase, reg);
if (ret < 0)
return ret;
ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * MP2993_VIN_LIMIT_UINT,
MP2993_VIN_LIMIT_DIV);
break;
case PMBUS_READ_IOUT:
case PMBUS_READ_IIN:
case PMBUS_IIN_OC_WARN_LIMIT:
case PMBUS_IOUT_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
case PMBUS_READ_VOUT:
case PMBUS_READ_PIN:
case PMBUS_READ_POUT:
case PMBUS_READ_TEMPERATURE_1:
ret = -ENODATA;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int mp2993_write_word_data(struct i2c_client *client, int page, int reg,
u16 word)
{
int ret;
switch (reg) {
case PMBUS_VOUT_OV_FAULT_LIMIT:
case PMBUS_VOUT_UV_FAULT_LIMIT:
ret = DIV_ROUND_CLOSEST(word * MP2993_VOUT_OVUV_DIV, MP2993_VOUT_OVUV_UINT);
ret = pmbus_write_word_data(client, 0, reg, ret);
break;
case PMBUS_OT_FAULT_LIMIT:
case PMBUS_OT_WARN_LIMIT:
/*
* The MP2993 ot fault limit value and ot warn limit value
* per rail are always the same, so only PMBUS_OT_FAULT_LIMIT
* and PMBUS_OT_WARN_LIMIT register in page 0 are defined to
* config the ot limit value.
*/
ret = pmbus_write_word_data(client, 0, reg, word);
break;
case PMBUS_VIN_OV_FAULT_LIMIT:
case PMBUS_VIN_OV_WARN_LIMIT:
case PMBUS_VIN_UV_WARN_LIMIT:
case PMBUS_VIN_UV_FAULT_LIMIT:
/* The MP2993 vin limit scale is (1/8V)/Lsb */
ret = pmbus_write_word_data(client, 0, reg,
DIV_ROUND_CLOSEST(word * MP2993_VIN_LIMIT_DIV,
MP2993_VIN_LIMIT_UINT));
break;
case PMBUS_IIN_OC_WARN_LIMIT:
/*
* The PMBUS_IIN_OC_WARN_LIMIT of MP2993 is linear11 format,
* and the exponent is a constant value(5'b00000)， so the
* exponent of word parameter should be converted to 5'b00000.
*/
ret = pmbus_write_word_data(client, page, reg,
mp2993_linear11_exponent_transfer(word, 0x00));
break;
//
case PMBUS_IOUT_OC_FAULT_LIMIT:
case PMBUS_IOUT_OC_WARN_LIMIT:
/*
* The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT
* of MP2993 can be regarded as linear11 format, and the
* exponent is a 5'b00001 or 5'b00000. To ensure a larger
* range of limit value, so the exponent of word parameter
* should be converted to 5'b00001.
*/
ret = pmbus_write_word_data(client, page, reg,
mp2993_linear11_exponent_transfer(word, 0x01));
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static struct pmbus_driver_info mp2993_info = {
.pages = MP2993_PAGE_NUM,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_TEMPERATURE] = direct,
.format[PSC_POWER] = linear,
.format[PSC_VOLTAGE_OUT] = direct,
.m[PSC_VOLTAGE_OUT] = 1,
.R[PSC_VOLTAGE_OUT] = 3,
.b[PSC_VOLTAGE_OUT] = 0,
.m[PSC_VOLTAGE_IN] = 1,
.R[PSC_VOLTAGE_IN] = 0,
.b[PSC_VOLTAGE_IN] = 0,
.m[PSC_TEMPERATURE] = 1,
.R[PSC_TEMPERATURE] = 0,
.b[PSC_TEMPERATURE] = 0,
.func[0] = MP2993_RAIL1_FUNC,
.func[1] = MP2993_RAIL2_FUNC,
.read_word_data = mp2993_read_word_data,
.write_word_data = mp2993_write_word_data,
.identify = mp2993_identify,
};
static int mp2993_probe(struct i2c_client *client)
{
return pmbus_do_probe(client, &mp2993_info);
}
static const struct i2c_device_id mp2993_id[] = {
{ "mp2993" },
{ }
};
MODULE_DEVICE_TABLE(i2c, mp2993_id);
static const struct of_device_id __maybe_unused mp2993_of_match[] = {
{.compatible = "mps,mp2993"},
{}
};
MODULE_DEVICE_TABLE(of, mp2993_of_match);
static struct i2c_driver mp2993_driver = {
.driver = {
.name = "mp2993",
.of_match_table = mp2993_of_match,
},
.probe = mp2993_probe,
.id_table = mp2993_id,
};
module_i2c_driver(mp2993_driver);
MODULE_AUTHOR("Noah Wang <noahwang.wang@outlook.com>");
MODULE_DESCRIPTION("PMBus driver for MPS MP2993");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS("PMBUS");
|
