1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
|
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
*
* Copyright (C) 2015-2017 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a7795.dtsi"
#include "salvator-xs.dtsi"
/ {
model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
compatible = "renesas,salvator-xs", "renesas,r8a7795";
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
memory@500000000 {
device_type = "memory";
reg = <0x5 0x00000000 0x0 0x40000000>;
};
memory@600000000 {
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x40000000>;
};
memory@700000000 {
device_type = "memory";
reg = <0x7 0x00000000 0x0 0x40000000>;
};
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
<&versaclock6 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock6 2>;
clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
&ehci2 {
status = "okay";
};
&ehci3 {
dr_mode = "otg";
status = "okay";
};
&hsusb3 {
dr_mode = "otg";
status = "okay";
};
&sound_card {
dais = <&rsnd_port0 /* ak4613 */
&rsnd_port1 /* HDMI0 */
&rsnd_port2>; /* HDMI1 */
};
&hdmi0 {
status = "okay";
ports {
port@1 {
reg = <1>;
rcar_dw_hdmi0_out: endpoint {
remote-endpoint = <&hdmi0_con>;
};
};
port@2 {
reg = <2>;
dw_hdmi0_snd_in: endpoint {
remote-endpoint = <&rsnd_endpoint1>;
};
};
};
};
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
&hdmi1 {
status = "okay";
ports {
port@1 {
reg = <1>;
rcar_dw_hdmi1_out: endpoint {
remote-endpoint = <&hdmi1_con>;
};
};
port@2 {
reg = <2>;
dw_hdmi1_snd_in: endpoint {
remote-endpoint = <&rsnd_endpoint2>;
};
};
};
};
&hdmi1_con {
remote-endpoint = <&rcar_dw_hdmi1_out>;
};
&ohci2 {
status = "okay";
};
&ohci3 {
dr_mode = "otg";
status = "okay";
};
&rcar_sound {
ports {
/* rsnd_port0 is on salvator-common */
rsnd_port1: port@1 {
reg = <1>;
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi2>;
};
};
rsnd_port2: port@2 {
reg = <2>;
rsnd_endpoint2: endpoint {
remote-endpoint = <&dw_hdmi1_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint2>;
frame-master = <&rsnd_endpoint2>;
playback = <&ssi3>;
};
};
};
};
&pca9654 {
pcie_sata_switch {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-low; /* enable SATA by default */
line-name = "PCIE/SATA switch";
};
};
&pfc {
usb2_pins: usb2 {
groups = "usb2";
function = "usb2";
};
/*
* - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
* (when SW31 is the default setting on Salvator-XS).
* - If SW31 is the default setting, you cannot use USB2.0 ch3 on
* r8a7795 with Salvator-XS.
* Hence the SW31 setting must be changed like 2) below.
* 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
* - Connect GP6_3[01] to ADV7842.
* 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
* - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
* - Connect GP6_{04,21} to ADV7842.
*/
usb2_ch3_pins: usb2_ch3 {
groups = "usb2_ch3";
function = "usb2_ch3";
};
};
/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
&sata {
status = "okay";
};
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy3 {
pinctrl-0 = <&usb2_ch3_pins>;
pinctrl-names = "default";
status = "okay";
};
|
