blob: 2bdbb6780242a14faad97ad0ca08b91107cb8aa0 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "bcm2712.dtsi"
/ {
compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
model = "Raspberry Pi 5";
aliases {
serial10 = &uart10;
};
chosen: chosen {
stdout-path = "serial10:115200n8";
};
/* Will be filled by the bootloader */
memory@0 {
device_type = "memory";
reg = <0 0 0 0x28000000>;
};
sd_io_1v8_reg: sd-io-1v8-reg {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
states = <1800000 1>,
<3300000 0>;
};
sd_vcc_reg: sd-vcc-reg {
compatible = "regulator-fixed";
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
};
};
/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
* labeled "UART", i.e. the interface with the system console.
*/
&uart10 {
status = "okay";
};
/* SDIO1 is used to drive the SD card */
&sdio1 {
vqmmc-supply = <&sd_io_1v8_reg>;
vmmc-supply = <&sd_vcc_reg>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-ddr50;
sd-uhs-sdr104;
};
|
