path: root/Documentation/trace/kprobetrace.rst

==========================
Kprobe-based Event Tracing
==========================

:Author: Masami Hiramatsu

Overview
--------
These events are similar to tracepoint-based events. Instead of tracepoints,
this is based on kprobes (kprobe and kretprobe). So it can probe wherever
kprobes can probe (this means, all functions except those with
__kprobes/nokprobe_inline annotation and those marked NOKPROBE_SYMBOL).
Unlike the tracepoint-based event, this can be added and removed
dynamically, on the fly.

To enable this feature, build your kernel with CONFIG_KPROBE_EVENTS=y.

Similar to the event tracer, this doesn't need to be activated via
current_tracer. Instead of that, add probe points via
/sys/kernel/tracing/kprobe_events, and enable it via
/sys/kernel/tracing/events/kprobes/<EVENT>/enable.

You can also use /sys/kernel/tracing/dynamic_events instead of
kprobe_events. That interface will provide unified access to other
dynamic events too.

Synopsis of kprobe_events
-------------------------
::

  p[:[GRP/][EVENT]] [MOD:]SYM[+offs]|MEMADDR [FETCHARGS]	: Set a probe
  r[MAXACTIVE][:[GRP/][EVENT]] [MOD:]SYM[+0] [FETCHARGS]	: Set a return probe
  p[:[GRP/][EVENT]] [MOD:]SYM[+0]%return [FETCHARGS]	: Set a return probe
  -:[GRP/][EVENT]						: Clear a probe

 GRP		: Group name. If omitted, use "kprobes" for it.
 EVENT		: Event name. If omitted, the event name is generated
		  based on SYM+offs or MEMADDR.
 MOD		: Module name which has given SYM.
 SYM[+offs]	: Symbol+offset where the probe is inserted.
 SYM%return	: Return address of the symbol
 MEMADDR	: Address where the probe is inserted.
 MAXACTIVE	: Maximum number of instances of the specified function that
		  can be probed simultaneously, or 0 for the default value
		  as defined in Documentation/trace/kprobes.rst section 1.3.1.

 FETCHARGS	: Arguments. Each probe can have up to 128 args.
  %REG		: Fetch register REG
  @ADDR		: Fetch memory at ADDR (ADDR should be in kernel)
  @SYM[+|-offs]	: Fetch memory at SYM +|- offs (SYM should be a data symbol)
  $stackN	: Fetch Nth entry of stack (N >= 0)
  $stack	: Fetch stack address.
  $argN		: Fetch the Nth function argument. (N >= 1) (\*1)
  $retval	: Fetch return value.(\*2)
  $comm		: Fetch current task comm.
  +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*3)(\*4)
  \IMM		: Store an immediate value to the argument.
  NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
  FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
		  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
		  (x8/x16/x32/x64), "string", "ustring", "symbol", "symstr"
                  and bitfield are supported.

  (\*1) only for the probe on function entry (offs == 0).
  (\*2) only for return probe.
  (\*3) this is useful for fetching a field of data structures.
  (\*4) "u" means user-space dereference. See :ref:`user_mem_access`.

Types
-----
Several types are supported for fetchargs. Kprobe tracer will access memory
by given type. Prefix 's' and 'u' means those types are signed and unsigned
respectively. 'x' prefix implies it is unsigned. Traced arguments are shown
in decimal ('s' and 'u') or hexadecimal ('x'). Without type casting, 'x32'
or 'x64' is used depends on the architecture (e.g. x86-32 uses x32, and
x86-64 uses x64).

These value types can be an array. To record array data, you can add '[N]'
(where N is a fixed number, less than 64) to the base type.
E.g. 'x16[4]' means an array of x16 (2-byte hex) with 4 elements.
Note that the array can be applied to memory type fetchargs, you can not
apply it to registers/stack-entries etc. (for example, '$stack1:x8[8]' is
wrong, but '+8($stack):x8[8]' is OK.)

String type is a special type, which fetches a "null-terminated" string from
kernel space. This means it will fail and store NULL if the string container
has been paged out. "ustring" type is an alternative of string for user-space.
See :ref:`user_mem_access` for more info.

The string array type is a bit different from other types. For other base
types, <base-type>[1] is equal to <base-type> (e.g. +0(%di):x32[1] is same
as +0(%di):x32.) But string[1] is not equal to string. The string type itself
represents "char array", but string array type represents "char * array".
So, for example, +0(%di):string[1] is equal to +0(+0(%di)):string.
Bitfield is another special type, which takes 3 parameters, bit-width, bit-
offset, and container-size (usually 32). The syntax is::

 b<bit-width>@<bit-offset>/<container-size>

Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
which shows given pointer in "symbol+offset" style.
On the other hand, symbol-string type ('symstr') converts the given address to
"symbol+offset/symbolsize" style and stores it as a null-terminated string.
With 'symstr' type, you can filter the event with wildcard pattern of the
symbols, and you don't need to solve symbol name by yourself.
For $comm, the default type is "string"; any other type is invalid.

.. _user_mem_access:

User Memory Access
------------------
Kprobe events supports user-space memory access. For that purpose, you can use
either user-space dereference syntax or 'ustring' type.

The user-space dereference syntax allows you to access a field of a data
structure in user-space. This is done by adding the "u" prefix to the
dereference syntax. For example, +u4(%si) means it will read memory from the
address in the register %si offset by 4, and the memory is expected to be in
user-space. You can use this for strings too, e.g. +u0(%si):string will read
a string from the address in the register %si that is expected to be in user-
space. 'ustring' is a shortcut way of performing the same task. That is,
+0(%si):ustring is equivalent to +u0(%si):string.

Note that kprobe-event provides the user-memory access syntax but it doesn't
use it transparently. This means if you use normal dereference or string type
for user memory, it might fail, and may always fail on some architectures. The
user has to carefully check if the target data is in kernel or user space.

Per-Probe Event Filtering
-------------------------
Per-probe event filtering feature allows you to set different filter on each
probe and gives you what arguments will be shown in trace buffer. If an event
name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
'enable', 'format', 'filter' and 'trigger'.

enable:
  You can enable/disable the probe by writing 1 or 0 on it.

format:
  This shows the format of this probe event.

filter:
  You can write filtering rules of this event.

id:
  This shows the id of this probe event.

trigger:
  This allows to install trigger commands which are executed when the event is
  hit (for details, see Documentation/trace/events.rst, section 6).

Event Profiling
---------------
You can check the total number of probe hits and probe miss-hits via
/sys/kernel/tracing/kprobe_profile.
The first column is event name, the second is the number of probe hits,
the third is the number of probe miss-hits.

Kernel Boot Parameter
---------------------
You can add and enable new kprobe events when booting up the kernel by
"kprobe_event=" parameter. The parameter accepts a semicolon-delimited
kprobe events, which format is similar to the kprobe_events.
The difference is that the probe definition parameters are comma-delimited
instead of space. For example, adding myprobe event on do_sys_open like below::

  p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack)

should be below for kernel boot parameter (just replace spaces with comma)::

  p:myprobe,do_sys_open,dfd=%ax,filename=%dx,flags=%cx,mode=+4($stack)


Usage examples
--------------
To add a probe as a new event, write a new definition to kprobe_events
as below::

  echo 'p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack)' > /sys/kernel/tracing/kprobe_events

This sets a kprobe on the top of do_sys_open() function with recording
1st to 4th arguments as "myprobe" event. Note, which register/stack entry is
assigned to each function argument depends on arch-specific ABI. If you unsure
the ABI, please try to use probe subcommand of perf-tools (you can find it
under tools/perf/).
As this example shows, users can choose more familiar names for each arguments.
::

  echo 'r:myretprobe do_sys_open $retval' >> /sys/kernel/tracing/kprobe_events

This sets a kretprobe on the return point of do_sys_open() function with
recording return value as "myretprobe" event.
You can see the format of these events via
/sys/kernel/tracing/events/kprobes/<EVENT>/format.
::

  cat /sys/kernel/tracing/events/kprobes/myprobe/format
  name: myprobe
  ID: 780
  format:
          field:unsigned short common_type;       offset:0;       size:2; signed:0;
          field:unsigned char common_flags;       offset:2;       size:1; signed:0;
          field:unsigned char common_preempt_count;       offset:3; size:1;signed:0;
          field:int common_pid;   offset:4;       size:4; signed:1;

          field:unsigned long __probe_ip; offset:12;      size:4; signed:0;
          field:int __probe_nargs;        offset:16;      size:4; signed:1;
          field:unsigned long dfd;        offset:20;      size:4; signed:0;
          field:unsigned long filename;   offset:24;      size:4; signed:0;
          field:unsigned long flags;      offset:28;      size:4; signed:0;
          field:unsigned long mode;       offset:32;      size:4; signed:0;


  print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->__probe_ip,
  REC->dfd, REC->filename, REC->flags, REC->mode

You can see that the event has 4 arguments as in the expressions you specified.
::

  echo > /sys/kernel/tracing/kprobe_events

This clears all probe points.

Or,
::

  echo -:myprobe >> kprobe_events

This clears probe points selectively.

Right after definition, each event is disabled by default. For tracing these
events, you need to enable it.
::

  echo 1 > /sys/kernel/tracing/events/kprobes/myprobe/enable
  echo 1 > /sys/kernel/tracing/events/kprobes/myretprobe/enable

Use the following command to start tracing in an interval.
::

    # echo 1 > tracing_on
    Open something...
    # echo 0 > tracing_on

And you can see the traced information via /sys/kernel/tracing/trace.
::

  cat /sys/kernel/tracing/trace
  # tracer: nop
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
  #              | |       |          |         |
             <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
             <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
             <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
             <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
             <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
             <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3


Each line shows when the kernel hits an event, and <- SYMBOL means kernel
returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
returns from do_sys_open to sys_open+0x1b).