blob: b7f5e86fed225b30a337b330e532804d4830ca51 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
Amlogic Meson SPI controllers
* SPIFC (SPI Flash Controller)
The Meson SPIFC is a controller optimized for communication with SPI
NOR memories, without DMA support and a 64-byte unified transmit /
receive buffer.
Required properties:
- compatible: should be "amlogic,meson6-spifc" or "amlogic,meson-gxbb-spifc"
- reg: physical base address and length of the controller registers
- clocks: phandle of the input clock for the baud rate generator
- #address-cells: should be 1
- #size-cells: should be 0
spi@c1108c80 {
compatible = "amlogic,meson6-spifc";
reg = <0xc1108c80 0x80>;
clocks = <&clk81>;
#address-cells = <1>;
#size-cells = <0>;
};
* SPICC (SPI Communication Controller)
The Meson SPICC is generic SPI controller for general purpose Full-Duplex
communications with dedicated 16 words RX/TX PIO FIFOs.
Required properties:
- compatible: should be:
"amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs.
"amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs
- reg: physical base address and length of the controller registers
- interrupts: The interrupt specifier
- clock-names: Must contain "core"
- clocks: phandle of the input clock for the baud rate generator
- #address-cells: should be 1
- #size-cells: should be 0
Optional properties:
- resets: phandle of the internal reset line
See ../spi/spi-bus.txt for more details on SPI bus master and slave devices
required and optional properties.
Example :
spi@c1108d80 {
compatible = "amlogic,meson-gx-spicc";
reg = <0xc1108d80 0x80>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core";
clocks = <&clk81>;
#address-cells = <1>;
#size-cells = <0>;
};
|
