blob: d86584ed4d9303354a113d43fea870df3cfdc3fc (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
MCP16502 PMIC
Required properties:
- compatible: "microchip,mcp16502"
- reg: I2C slave address
- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
suspend-to-ram, keeping the PMIC into HIBERNATE mode.
- regulators: A node that houses a sub-node for each regulator within
the device. Each sub-node is identified using the node's
name. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
Regulators of MCP16502 PMIC:
1) VDD_IO - Buck (1.2 - 3.7 V)
2) VDD_DDR - Buck (0.6 - 1.85 V)
3) VDD_CORE - Buck (0.6 - 1.85 V)
4) VDD_OTHER - BUCK (0.6 - 1.85 V)
5) LDO1 - LDO (1.2 - 3.7 V)
6) LDO2 - LDO (1.2 - 3.7 V)
Regulator modes:
2 - FPWM: higher precision, higher consumption
4 - AutoPFM: lower precision, lower consumption
Each regulator is defined using the standard binding for regulators.
Example:
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
regulators {
VDD_IO {
regulator-name = "VDD_IO";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
VDD_DDR {
regulator-name = "VDD_DDR";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <4>;
};
};
VDD_CORE {
regulator-name = "VDD_CORE";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
};
regulator-state-mem {
regulator-off-in-suspend;
};
};
LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
};
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
|
