1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PMIC GPIO block
maintainers:
- Bjorn Andersson <bjorn.andersson@linaro.org>
description:
This binding describes the GPIO block(s) found in the 8xxx series of
PMIC's from Qualcomm.
properties:
compatible:
items:
- enum:
- qcom,pm660-gpio
- qcom,pm660l-gpio
- qcom,pm6150-gpio
- qcom,pm6150l-gpio
- qcom,pm6350-gpio
- qcom,pm7325-gpio
- qcom,pm8005-gpio
- qcom,pm8008-gpio
- qcom,pm8018-gpio
- qcom,pm8038-gpio
- qcom,pm8058-gpio
- qcom,pm8150-gpio
- qcom,pm8150b-gpio
- qcom,pm8350-gpio
- qcom,pm8350b-gpio
- qcom,pm8350c-gpio
- qcom,pm8916-gpio
- qcom,pm8917-gpio
- qcom,pm8921-gpio
- qcom,pm8941-gpio
- qcom,pm8950-gpio
- qcom,pm8994-gpio
- qcom,pm8998-gpio
- qcom,pma8084-gpio
- qcom,pmi8950-gpio
- qcom,pmi8994-gpio
- qcom,pmi8998-gpio
- qcom,pmk8350-gpio
- qcom,pmr735a-gpio
- qcom,pmr735b-gpio
- qcom,pms405-gpio
- qcom,pmx55-gpio
- enum:
- qcom,spmi-gpio
- qcom,ssbi-gpio
reg:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
gpio-controller: true
gpio-ranges:
maxItems: 1
'#gpio-cells':
const: 2
description:
The first cell will be used to define gpio number and the
second denotes the flags for this gpio
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- gpio-ranges
- interrupt-controller
patternProperties:
'-state$':
oneOf:
- $ref: "#/$defs/qcom-pmic-gpio-state"
- patternProperties:
".*":
$ref: "#/$defs/qcom-pmic-gpio-state"
$defs:
qcom-pmic-gpio-state:
type: object
allOf:
- $ref: "pinmux-node.yaml"
- $ref: "pincfg-node.yaml"
properties:
pins:
description:
List of gpio pins affected by the properties specified in
this subnode. Valid pins are
- gpio1-gpio10 for pm6150
- gpio1-gpio12 for pm6150l
- gpio1-gpio9 for pm6350
- gpio1-gpio10 for pm7325
- gpio1-gpio4 for pm8005
- gpio1-gpio2 for pm8008
- gpio1-gpio6 for pm8018
- gpio1-gpio12 for pm8038
- gpio1-gpio40 for pm8058
- gpio1-gpio10 for pm8150 (holes on gpio2, gpio5,
gpio7 and gpio8)
- gpio1-gpio12 for pm8150b (holes on gpio3, gpio4
and gpio7)
- gpio1-gpio12 for pm8150l (hole on gpio7)
- gpio1-gpio4 for pm8916
- gpio1-gpio10 for pm8350
- gpio1-gpio8 for pm8350b
- gpio1-gpio9 for pm8350c
- gpio1-gpio38 for pm8917
- gpio1-gpio44 for pm8921
- gpio1-gpio36 for pm8941
- gpio1-gpio8 for pm8950 (hole on gpio3)
- gpio1-gpio22 for pm8994
- gpio1-gpio26 for pm8998
- gpio1-gpio22 for pma8084
- gpio1-gpio2 for pmi8950
- gpio1-gpio10 for pmi8994
- gpio1-gpio4 for pmk8350
- gpio1-gpio4 for pmr735a
- gpio1-gpio4 for pmr735b
- gpio1-gpio12 for pms405 (holes on gpio1, gpio9
and gpio10)
- gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
and gpio11)
items:
pattern: "^gpio([0-9]+)$"
function:
items:
- enum:
- normal
- paired
- func1
- func2
- dtest1
- dtest2
- dtest3
- dtest4
- func3 # supported by LV/MV GPIO subtypes
- func4 # supported by LV/MV GPIO subtypes
bias-disable: true
bias-pull-down: true
bias-pull-up: true
qcom,pull-up-strength:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Specifies the strength to use for pull up, if selected.
Valid values are defined in
<dt-bindings/pinctrl/qcom,pmic-gpio.h>
If this property is omitted 30uA strength will be used
if pull up is selected
enum: [0, 1, 2, 3]
bias-high-impedance: true
input-enable: true
output-high: true
output-low: true
output-enable: true
output-disable: true
power-source: true
qcom,drive-strength:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Selects the drive strength for the specified pins
Valid drive strength values are defined in
<dt-bindings/pinctrl/qcom,pmic-gpio.h>
enum: [0, 1, 2, 3]
drive-push-pull: true
drive-open-drain: true
drive-open-source: true
qcom,analog-pass:
$ref: /schemas/types.yaml#/definitions/flag
description:
The specified pins are configured in
analog-pass-through mode.
qcom,atest:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Selects ATEST rail to route to GPIO when it's
configured in analog-pass-through mode.
enum: [1, 2, 3, 4]
qcom,dtest-buffer:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Selects DTEST rail to route to GPIO when it's
configured as digital input.
enum: [1, 2, 3, 4]
required:
- pins
- function
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
pm8921_gpio: gpio@150 {
compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
reg = <0x150 0x160>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
gpio-ranges = <&pm8921_gpio 0 0 44>;
#gpio-cells = <2>;
pm8921_gpio_keys: gpio-keys-state {
volume-keys {
pins = "gpio20", "gpio21";
function = "normal";
input-enable;
bias-pull-up;
drive-push-pull;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
power-source = <PM8921_GPIO_S4>;
};
};
};
...
|
