1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm NAND controller
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
properties:
compatible:
enum:
- qcom,ipq806x-nand
- qcom,ipq4019-nand
- qcom,ipq6018-nand
- qcom,ipq8074-nand
- qcom,sdx55-nand
reg:
maxItems: 1
clocks:
items:
- description: Core Clock
- description: Always ON Clock
clock-names:
items:
- const: core
- const: aon
patternProperties:
"^nand@[a-f0-9]$":
type: object
properties:
nand-bus-width:
const: 8
nand-ecc-strength:
enum: [1, 4, 8]
nand-ecc-step-size:
enum:
- 512
allOf:
- $ref: "nand-controller.yaml#"
- if:
properties:
compatible:
contains:
const: qcom,ipq806x-nand
then:
properties:
dmas:
items:
- description: rxtx DMA channel
dma-names:
items:
- const: rxtx
qcom,cmd-crci:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Must contain the ADM command type CRCI block instance number
specified for the NAND controller on the given platform
qcom,data-crci:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Must contain the ADM data type CRCI block instance number
specified for the NAND controller on the given platform
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-nand
- qcom,ipq6018-nand
- qcom,ipq8074-nand
- qcom,sdx55-nand
then:
properties:
dmas:
items:
- description: tx DMA channel
- description: rx DMA channel
- description: cmd DMA channel
dma-names:
items:
- const: tx
- const: rx
- const: cmd
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq806x-nand
then:
properties:
qcom,boot-partitions:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description: offset
- description: size
description:
Boot partition use a different layout where the 4 bytes of spare
data are not protected by ECC. Use this to declare these special
partitions by defining first the offset and then the size.
It's in the form of <offset1 size1 offset2 size2 offset3 ...>
and should be declared in ascending order.
Refer to the ipq8064 example on how to use this special binding.
required:
- compatible
- reg
- clocks
- clock-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
nand-controller@1ac00000 {
compatible = "qcom,ipq806x-nand";
reg = <0x1ac00000 0x800>;
clocks = <&gcc EBI2_CLK>,
<&gcc EBI2_AON_CLK>;
clock-names = "core", "aon";
dmas = <&adm_dma 3>;
dma-names = "rxtx";
qcom,cmd-crci = <15>;
qcom,data-crci = <3>;
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
qcom,boot-partitions = <0x0 0x58a0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot-nand";
reg = <0 0x58a0000>;
};
partition@58a0000 {
label = "fs-nand";
reg = <0x58a0000 0x4000000>;
};
};
};
};
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
nand-controller@79b0000 {
compatible = "qcom,ipq4019-nand";
reg = <0x79b0000 0x1000>;
clocks = <&gcc GCC_QPIC_CLK>,
<&gcc GCC_QPIC_AHB_CLK>;
clock-names = "core", "aon";
dmas = <&qpicbam 0>,
<&qpicbam 1>,
<&qpicbam 2>;
dma-names = "tx", "rx", "cmd";
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-bus-width = <8>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot-nand";
reg = <0 0x58a0000>;
};
partition@58a0000 {
label = "fs-nand";
reg = <0x58a0000 0x4000000>;
};
};
};
};
...
|
