| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in tools/testing/selftests/kvm - these were
unnecessarily different from what the kernel uses, so they're being
made consistent.
arm64:
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead of
relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...)
- Spelling fixes
Selftests:
- Rename types across all KVM selftests to more closely align with
types used in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
- Fix Loongarch compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: selftests: Add check_steal_time_uapi() implementation for LoongArch
KVM: arm64: Wake-up from WFI when iqrchip is in userspace
KVM: arm64: Fix initialisation order in __pkvm_init_finalise()
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
KVM: arm64: Fix kvm_vcpu_initialized() macro parameter
KVM: arm64: Fix FEAT_SPE_FnE to use PMSIDR_EL1.FnE, not PMSVer
KVM: arm64: Fix typo in feature check comments
KVM: arm64: Fix FEAT_Debugv8p9 to check DebugVer, not PMUVer
KVM: arm64: Reject non compliant SMCCC function calls in pKVM
KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value
KVM: selftests: Replace "paddr" with "gpa" throughout
KVM: selftests: Replace "u64 nested_paddr" with "gpa_t l2_gpa"
KVM: selftests: Replace "u64 gpa" with "gpa_t" throughout
KVM: selftests: Replace "vaddr" with "gva" throughout
KVM: selftests: Clarify that arm64's inject_uer() takes a host PA, not a guest PA
KVM: selftests: Rename translate_to_host_paddr() => translate_hva_to_hpa()
KVM: selftests: Rename vm_vaddr_populate_bitmap() => vm_populate_gva_bitmap()
KVM: selftests: Rename vm_vaddr_unused_gap() => vm_unused_gva_gap()
KVM: selftests: Drop "vaddr_" from APIs that allocate memory for a given VM
KVM: selftests: Use u8 instead of uint8_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The merge window pulled in the cgroup sub-scheduler infrastructure,
and new AI reviews are accelerating bug reporting and fixing - hence
the larger than usual fixes batch:
- Use-after-frees during scheduler load/unload:
- The disable path could free the BPF scheduler while deferred
irq_work / kthread work was still in flight
- cgroup setter callbacks read the active scheduler outside the
rwsem that synchronizes against teardown
Fix both, and reuse the disable drain in the enable error paths so
the BPF JIT page can't be freed under live callbacks.
- Several BPF op invocations didn't tell the framework which runqueue
was already locked, so helper kfuncs that re-acquire the runqueue
by CPU could deadlock on the held lock
Fix the affected callsites, including recursive parent-into-child
dispatch.
- The hardlockup notifier ran from NMI but eventually took a
non-NMI-safe lock. Bounce it through irq_work.
- A handful of bugs in the new sub-scheduler hierarchy:
- helper kfuncs hard-coded the root instead of resolving the
caller's scheduler
- the enable error path tried to disable per-task state that had
never been initialized, and leaked cpus_read_lock on the way
out
- a sysfs object was leaked on every load/unload
- the dispatch fast-path used the root scheduler instead of the
task's
- a couple of CONFIG #ifdef guards were misclassified
- Verifier-time hardening: BPF programs of unrelated struct_ops types
(e.g. tcp_congestion_ops) could call sched_ext kfuncs - a semantic
bug and, once sub-sched was enabled, a KASAN out-of-bounds read.
Now rejected at load. Plus a few NULL and cross-task argument
checks on sched_ext kfuncs, and a selftest covering the new deny.
- rhashtable (Herbert): restore the insecure_elasticity toggle and
bounce the deferred-resize kick through irq_work to break a
lock-order cycle observable from raw-spinlock callers. sched_ext's
scheduler-instance hash is the first user of both.
- The bypass-mode load balancer used file-scope cpumasks; with
multiple scheduler instances now possible, those raced. Move to
per-instance cpumasks, plus a follow-up to skip tasks whose
recorded CPU is stale relative to the new owning runqueue.
- Smaller fixes:
- a dispatch queue's first-task tracking misbehaved when a parked
iterator cursor sat in the list
- the runqueue's next-class wasn't promoted on local-queue
enqueue, leaving an SCX task behind RT in edge cases
- the reference qmap scheduler stopped erroring on legitimate
cross-scheduler task-storage misses"
* tag 'sched_ext-for-7.1-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (26 commits)
sched_ext: Fix scx_flush_disable_work() UAF race
sched_ext: Call wakeup_preempt() in local_dsq_post_enq()
sched_ext: Release cpus_read_lock on scx_link_sched() failure in root enable
sched_ext: Reject NULL-sch callers in scx_bpf_task_set_slice/dsq_vtime
sched_ext: Refuse cross-task select_cpu_from_kfunc calls
sched_ext: Align cgroup #ifdef guards with SUB_SCHED vs GROUP_SCHED
sched_ext: Make bypass LB cpumasks per-scheduler
sched_ext: Pass held rq to SCX_CALL_OP() for core_sched_before
sched_ext: Pass held rq to SCX_CALL_OP() for dump_cpu/dump_task
sched_ext: Save and restore scx_locked_rq across SCX_CALL_OP
sched_ext: Use dsq->first_task instead of list_empty() in dispatch_enqueue() FIFO-tail
sched_ext: Resolve caller's scheduler in scx_bpf_destroy_dsq() / scx_bpf_dsq_nr_queued()
sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters
sched_ext: Don't disable tasks in scx_sub_enable_workfn() abort path
sched_ext: Skip tasks with stale task_rq in bypass_lb_cpu()
sched_ext: Guard scx_dsq_move() against NULL kit->dsq after failed iter_new
sched_ext: Unregister sub_kset on scheduler disable
sched_ext: Defer scx_hardlockup() out of NMI
sched_ext: sync disable_irq_work in bpf_scx_unreg()
sched_ext: Fix local_dsq_post_enq() to use task's scheduler in sub-sched
...
|
|
https://github.com/kvm-x86/linux into HEAD
KVM selftests type renames for 7.1
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
|
|
Define check_steal_time_uapi() for LoongArch so that the steal_time test
builds. Note, while LoongArch's steal_time_init() has some funky asserts,
none of the code is uniquely verifying KVM's uAPI.
Cc: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Cc: Jiakai Xu <jiakaiPeanut@gmail.com>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Fixes: 40351ed924dd ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260420192644.3892050-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull power utility updates from Len Brown:
"x86_energy_perf_policy:
- Initial SoC Slider support
turbostat:
- Display HT siblings in cpu# order
- Add Module-ID column
- Print Core-ID and APIC-ID in hex
- Fix misc bugs"
* tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power x86_energy_perf_policy: Version 2026.04.25
tools/power x86_energy_perf_policy.8: Document SoC Slider Options
tools/power x86_energy_perf_policy: Enhances SoC Slider related checks
tools/power turbostat: v2026.04.21
tools/power turbostat: Process HT siblings in CPU order
tools/power turbostat: Show module_id column
tools/power turbostat: Print core_id and apic_id in hex
tools/power turbostat: Cleanup print helper functions
tools/power turbostat: Fix --cpu-set 1 regression on HT systems
tools/power turbostat: Fix --cpu-set 0 regression on HT systems
tools/power turbostat: Fix unrecognized option '-P'
tools/power turbostat: Fix AMD RAPL regression on big systems
tools/power/x86: Add SOC slider and platform profile support
|
|
|
|
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"There is one significant change outside arch/riscv in this pull
request: the addition of a set of KUnit tests for strlen(), strnlen(),
and strrchr().
Otherwise, the most notable changes are to add some RISC-V-specific
string function implementations, to remove XIP kernel support, to add
hardware error exception handling, and to optimize our runtime
unaligned access speed testing.
A few comments on the motivation for removing XIP support. It's been
broken in the RISC-V kernel for months. The code is not easy to
maintain. Furthermore, for XIP support to truly be useful for RISC-V,
we think that compile-time feature switches would need to be added for
many of the RISC-V ISA features and microarchitectural properties that
are currently implemented with runtime patching. No one has stepped
forward to take responsibility for that work, so many of us think it's
best to remove it until clear use cases and champions emerge.
Summary:
- Add Kunit correctness testing and microbenchmarks for strlen(),
strnlen(), and strrchr()
- Add RISC-V-specific strnlen(), strchr(), strrchr() implementations
- Add hardware error exception handling
- Clean up and optimize our unaligned access probe code
- Enable HAVE_IOREMAP_PROT to be able to use generic_access_phys()
- Remove XIP kernel support
- Warn when addresses outside the vmemmap range are passed to
vmemmap_populate()
- Update the ACPI FADT revision check to warn if it's not at least
ACPI v6.6, which is when key RISC-V-specific tables were added to
the specification
- Increase COMMAND_LINE_SIZE to 2048 to match ARM64, x86, PowerPC,
etc.
- Make kaslr_offset() a static inline function, since there's no need
for it to show up in the symbol table
- Add KASLR offset and SATP to the VMCOREINFO ELF notes to improve
kdump support
- Add Makefile cleanup rule for vdso_cfi copied source files, and add
a .gitignore for the build artifacts in that directory
- Remove some redundant ifdefs that check Kconfig macros
- Add missing SPDX license tag to the CFI selftest
- Simplify UTS_MACHINE assignment in the RISC-V Makefile
- Clarify some unclear comments and remove some superfluous comments
- Fix various English typos across the RISC-V codebase"
* tag 'riscv-for-linus-7.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
riscv: Remove support for XIP kernel
riscv: Reuse compare_unaligned_access() in check_vector_unaligned_access()
riscv: Split out compare_unaligned_access()
riscv: Reuse measure_cycles() in check_vector_unaligned_access()
riscv: Split out measure_cycles() for reuse
riscv: Clean up & optimize unaligned scalar access probe
riscv: lib: add strrchr() implementation
riscv: lib: add strchr() implementation
riscv: lib: add strnlen() implementation
lib/string_kunit: extend benchmarks to strnlen() and chr searches
lib/string_kunit: add performance benchmark for strlen()
lib/string_kunit: add correctness test for strrchr()
lib/string_kunit: add correctness test for strnlen()
lib/string_kunit: add correctness test for strlen()
riscv: vdso_cfi: Add .gitignore for build artifacts
riscv: vdso_cfi: Add clean rule for copied sources
riscv: enable HAVE_IOREMAP_PROT
riscv: mm: WARN_ON() for bad addresses in vmemmap_populate()
riscv: acpi: update FADT revision check to 6.6
riscv: add hardware error trap handler support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
|
|
Inside migrate_dance(), add epoll checks around shutdown() to
verify that the target listener is not ready before shutdown()
and becomes ready immediately after shutdown() triggers migration.
Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV
as it depends on later handshake completion.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Link: https://patch.msgid.link/20260422024554.130346-3-jt26wzz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 5961 Section 5.2 / RFC 793 Section 3.9 require a challenge ACK
whenever an incoming SEG.ACK falls outside
[SND.UNA - MAX.SND.WND, SND.NXT]. There is currently no packetdrill
coverage for either edge.
Add tcp_rfc5961_ack-out-of-window.pkt, which in a single passive-open
connection exercises:
- Upper edge (SEG.ACK > SND.NXT): peer ACKs data that was never
sent before the server has transmitted anything.
- Lower edge (SEG.ACK < SND.UNA - MAX.SND.WND): after the server
has sent 2000 bytes (the peer-advertised rwnd forces two 1000-byte
segments, both acknowledged), peer sends an ACK that is older
than the acceptable window.
Both cases must elicit a challenge ACK
<SEQ = SND.NXT, ACK = RCV.NXT, CTL = ACK>. The per-socket RFC 5961
Section 7 rate limit is disabled for the duration of the test so that
both challenge ACKs can fire back-to-back.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:
"All incoming segments whose ACK value doesn't satisfy the above
condition MUST be discarded and an ACK sent back."
Commit 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:
"If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
then send an ACK, drop the segment, and return."
Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited(). FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.
Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new chk_sndbuf() helper to diag.sh that extracts the sndbuf
(the 'tb' field from 'ss -m' skmem output) for both server and
client MPTCP sockets, and verifies they are equal.
Without the previous patch, it will fail:
'''
07 ....chk sndbuf server/client [FAIL] sndbuf S=20480 != C=2630656
'''
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-2-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fio 3.42 was released with the needed fix for test_integrity_02.sh.
Allow 3.42 and newer in the fio version check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The _cleanup helper function doesn't take any arguments, so drop them
from its callers.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to do the following load-acquire and store-release tests on
LoongArch:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
It needs to enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file
to analyze the failure. The Perl function localtime is used to create
the data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not
account for that. Thus for April 20, 2026, the timestamp of 20260320
is used, instead of 20260420.
- Save the logfile to the failure directory
Just the test log was saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to
analyzing the failure. Save the logfile as well.
* tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add logfile to failure directory
ktest: Fix the month in the name of the failure directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
|
|
Since v2026.02.14
Display HT siblings in cpu# order.
Add Module-ID column.
Print Core-ID and APIC-ID in hex.
Fix misc bugs.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On large systems with HT sibling cpu#'s more than 32 apart,
HT siblings were processed and displayed in reverse order.
This was due to how set_thread_siblings() parsed the
sibling-bit-mask.
Update set_thread_siblings to instead parse the sibling-list,
like other cpu lists, and to thus order HT siblings
by ascending CPU number, no matter the size of the system.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Get the "module_id" from the Linux topology "cluster_id".
If the there is more than one id, show it by default.
Module joins Die etc. in the "topology" group.
Display in hex, as it is usually based mask of the APIC-id
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The core_id is based on a mask of the apic_id.
Print them both in hex, rather than decimal,
to make this relationship visibly clear.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Make printer helper functions more readable by factoring
out a local 'sep' variable.
Remove the redundant parentheses around sprintf() calls.
Remove an unnecessary cast to "unsigned int" by using the '%08llx' instead
of '%08x'.
No functional changes.
[lenb: fix typos, simplify]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When the "--cpu-set" option limits turbostat to run on
a higher numbered HT sibling, it exits upon dividing by zero.
This is because the HT support handles higher numbered siblings
at the same time as lower numbered siblings. But when that lower
number sibling is dis-allowed, the higher numbered sibling is
never processed. The result is a time delta of 0, which results
in a divide by 0 for any of the "per-second" metrics.
Enhance the HT enumeration code to record all siblings (up to SMT4).
Consult this complete HT sibling list to determine when
to process an HT sibling, and when to skip it.
Fixes: a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
"turbostat --cpu-set 0" appears to hang if cpu0 has an HT sibling.
This is because the initialization code recognizes that it does not
have to open perf files for the HT sibling, but the HT support
in the collection code sees the HT sibling and tries to read
from an uninitialized file descriptor, 0 (standard input).
Access HT siblings only when they are in the allowed set.
Fixes: a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Len Brown <len.brown@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The '-P' short option (shorthand for --no-perf) is not present in the
optstring of the second call to getopt_long_only(). This results in
the "unrecognized option" error when the tool reaches the main parsing
loop.
Add 'P' to the second getopt_long_only() call to ensure it is
consistently recognized.
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe bug fixes:
- Prevent re-registration
Add an earlier check to reject re-registering an already active
fprobe before its state is modified during the initialization phase
- Robustness in failure paths:
- Ensure fprobes are correctly removed from all internal tables
and properly RCU-freed during registration failure
- Make unregister_fprobe() proceed with unregistration even if
temporary memory allocation fails
- RCU safety in module unloading
Avoid a potential "sleep in RCU" warning by removing a kcalloc()
call in the module notifier path. This also tries to remove
fprobe_hash_node even if memory allocation fails.
- Type-aware unregistration
Fix a bug where unregistering an fprobe did not account for
different types (entry-only vs entry-exit) at the same address,
which previously left "junk" entries in the underlying
ftrace/fgraph ops
- Unregistration of empty ftrace_ops
Avoid unneeded performance overhead due to making registered
ftrace_ops empty - which means 'trace all functions'. This counts
remaining entries and unregister ftrace_ops when it becomes empty.
Two new selftests to check above fixes:
- Module Unloading Test:
Specifically verifies that fprobe events on a module are correctly
cleaned up and do not trigger 'trace-all' behavior when the module
is removed.
- Multiple Fprobe Events Test:
Ensure that having multiple fprobes on the same function correctly
manages the ftrace hash map during removal"
* tag 'probes-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Add a testcase for multiple fprobe events
selftests/ftrace: Add a testcase for fprobe events on module
tracing/fprobe: Fix to unregister ftrace_ops if it is empty on module unloading
tracing/fprobe: Check the same type fprobe on table as the unregistered one
tracing/fprobe: Avoid kcalloc() in rcu_read_lock section
tracing/fprobe: Remove fprobe from hash in failure path
tracing/fprobe: Unregister fprobe even if memory allocation fails
tracing/fprobe: Reject registration of a registered fprobe before init
|
|
Add a testcase for multiple fprobe events on the same function
so that it clears ftrace hash map correctly when removing the
events.
Link: https://lore.kernel.org/all/177669370353.132053.16801520791509406141.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add a testcase for fprobe events on module, which unloads a kernel
module on which fprobe events are probing and ensure the ftrace
hash map is cleared correctly.
Link: https://lore.kernel.org/all/177669369564.132053.623527664540176496.stgit@mhiramat.tok.corp.google.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
The initial fix for this regression was incomplete, as it did not
handle multi-package systems with sparse core ids.
Fixes: ef0e60083f76 ("tools/power turbostat: Fix AMD RAPL regression")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull more crypto library updates from Eric Biggers:
"Crypto library fix and documentation update:
- Fix an integer underflow in the mpi library
- Improve the crypto library documentation"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: docs: Add rst documentation to Documentation/crypto/
docs: kdoc: Expand 'at_least' when creating parameter list
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
|
|
scx_fork() dispatches ops.init_task to exactly one scheduler - the one
owning the forking task's cgroup. A task forked inside a sub-scheduler's
cgroup is init'd into the sub only; the root scheduler has no task_ctx
entry for it. When that task later appears as @prev in the root's
qmap_dispatch() (or flows through core-sched comparison via task_qdist),
the bpf_task_storage_get() legitimately misses.
qmap treated those misses as fatal via scx_bpf_error("task_ctx lookup
failed") and aborted the scheduler as soon as the first cross-sched
task hit the root. Drop the error in the sites where the miss is
legitimate: lookup_task_ctx() (helper; callers already check for NULL),
qmap_dispatch()'s @prev branch (bookkeeping-only), task_qdist()
(returns 0 which makes the comparison a no-op), and qmap_select_cpu()
(returns prev_cpu as a no-op fallback instead of -ESRCH). The existing
scx_error was a paranoid guard from the pre-sub-sched world where every
task was owned by the one and only scheduler.
v2: qmap_select_cpu() returns prev_cpu on NULL instead of -ESRCH, so
the root scheduler doesn't error on cross-sched tasks that pass
through it (Andrea Righi).
Fixes: 4f8b122848db ("sched_ext: Add basic building blocks for nested sub-scheduler dispatching")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
|
|
Replace teamd daemon usage with ip link commands for team device
setup. teamd -d daemonizes and returns to the shell before port
addition completes, creating a race: the test may create the macvlan
(and check for its address on a slave) before teamd has finished
adding ports. This makes the test inherently dependent on scheduling
timing.
Using ip commands makes port addition synchronous, removing the race
and making the test deterministic.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-16-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test that exercises the ndo_change_rx_flags path through a
macvlan -> bridge -> team -> dummy stack. This triggers dev_uc_add
under addr_list_lock which flips promiscuity on the lower device.
With the new work queue approach, this must not deadlock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-15-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix regressions in non-bash shells and busybox support, and revert a
commit that regressed in build and installation when one or more tests
fail to build.
Fix duplicated test number reporting introduced in ktap support patch"
* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix duplicated test number reporting
selftests: Fix runner.sh for non-bash shells
selftests: Fix runner.sh busybox support
selftests: Deescalate error reporting
|
|
Replace all variations of "paddr" variables in KVM selftests with "gpa",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_paddr_t to
gpa_t.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In x86's nested TDP APIs, use the appropriate gpa_t typedef and rename
variables from nested_paddr to l2_gpa to match KVM x86's nomenclature.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use gpa_t instead of u64 for obvious declarations of GPA variables.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all variations of "vaddr" variables in KVM selftests with "gva",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_vaddr_t to
gva_t.
Opportunistically use gva_t instead of u64 for relevant variables, and
fixup indentation as appropriate.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
guest PA
Rename inject_uer()'s @paddr to @hpa to make it more obvious that it
injects an error using a host PA, not a guest PA.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename arm64's translate_to_host_paddr() to translate_hva_to_hpa() and
update variable names to match, as using "vaddr" and "paddr" terminology
is super confusing due to selftests using those exact names for *guest*
addresses.
Opportunisitically drop superfluous local page_addr and paddr variables.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the helper
for populating the initial GVA bitmap to drop the defunct terminology and
use "vm" for the scope.
Opportunistically fixup the declaration of the API, which has been broken
since day 1. The flaw went unnoticed because the sole caller is defined
after the weak version, i.e. can see the prototype without a previous
declaration.
No functional change intended.
Fixes: e8b9a055fa04 ("KVM: arm64: selftests: Align VA space allocator with TTBR0")
Link: https://patch.msgid.link/20260420212004.3938325-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, rename the API
for finding an unused range of virtual memory to drop the defunct
terminology and use "vm" for the scope.
Opportunistically clean up the function comment to drop superfluous
and redundant information.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests use gva_t instead of vm_vaddr_t, drop "vaddr_" from
the core memory allocation APIs as the information is extraneous and does
more harm than good. E.g. the APIs don't _just_ allocate virtual memory,
they allocate backing physical memory and install mappings in the guest
page tables. And as proven by kmalloc() and malloc(), developers generally
expect that allocations come with a working virtual address.
Opportunistically clean up the function comment for vm_alloc(), and drop
the misleading and superfluous comments for its wrappers.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use u8 instead of uint8_t to make the KVM selftests code more concise
and more similar to the kernel (since selftests are primarily developed
by kernel developers).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/uint8_t/u8/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://patch.msgid.link/20260420212004.3938325-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
