| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the hard coded encodings from parse-events. This has the
consequence that software events are matched using the sysfs/json
priority, will be case insensitive and will be wildcarded across PMUs.
As there were software and hardware types in the parsing code, the
removal means software vs hardware logic can be removed and hardware
assumed.
Now the perf json provides detailed descriptions of software events,
remove the previous listing support that didn't contain event
descriptions. When globbing is required for the "sw" option in perf
list, use string PMU globbing as was done previously for the tool PMU.
The output of `perf list sw` command changed like this.
Before:
List of pre-defined events (to be used in -e or -M):
alignment-faults [Software event]
bpf-output [Software event]
cgroup-switches [Software event]
context-switches OR cs [Software event]
cpu-clock [Software event]
cpu-migrations OR migrations [Software event]
dummy [Software event]
emulation-faults [Software event]
major-faults [Software event]
minor-faults [Software event]
page-faults OR faults [Software event]
task-clock [Software event]
After:
List of pre-defined events (to be used in -e or -M):
software:
alignment-faults
[Number of kernel handled memory alignment faults. Unit: software]
bpf-output
[An event used by BPF programs to write to the perf ring buffer. Unit: software]
cgroup-switches
[Number of context switches to a task in a different cgroup. Unit: software]
context-switches
[Number of context switches [This event is an alias of cs]. Unit: software]
cpu-clock
[Per-CPU high-resolution timer based event. Unit: software]
cpu-migrations
[Number of times a process has migrated to a new CPU [This event is an alias of migrations]. Unit: software]
cs
[Number of context switches [This event is an alias of context-switches]. Unit: software]
dummy
[A placeholder event that doesn't count anything. Unit: software]
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250725185202.68671-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add json for software events so that in perf list the events can have
a description. Common json exists for the tool PMU but it has no
sysfs equivalent. Modify the map_for_pmu code to return the common map
(rather than an architecture specific one) when a PMU with a common
name is being looked for, this allows the events to be found.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250725185202.68671-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The libtraceevent has been removed from the source tree, and .gitignore
needs to be updated as well.
Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent")
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250726111532.8031-1-cp0613@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The previous commit that introduced this test overlooked a behavior of
"perf test list", causing it to print "SPDX-License-Identifier: GPL-2.0"
as a description for that test. This reorders the comments to fix that
issue.
Fixes: edf2cadf01e8 ("perf test: add test for BPF metadata collection")
Signed-off-by: Blake Jones <blakejones@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250726004023.3466563-1-blakejones@google.com
[ update the commit message a little bit ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The current test scripts contain duplicated root permission checks in
multiple locations. This patch consolidates these checks into _common.sh
to eliminate code redundancy.
Link: https://lkml.kernel.org/r/20250718064217.299300-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.py is testing if non-default additional parameters can be committed.
Add a test case for further reducing the parameters to the default set.
Link: https://lkml.kernel.org/r/20250720171652.92309-23-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sysfs.py is testing only the default and minimum DAMON parameters. Add
another test case for more non-default additional DAMON parameters
commitment on runtime.
Link: https://lkml.kernel.org/r/20250720171652.92309-22-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON context commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-21-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON monitoring attributes commitment assertion is hard-coded for a
specific test case. Split it out into a general version that can be
reused for different test cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS schemes commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-19-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS scheme commitment assertion is not testing DAMOS filters.
Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-18-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS scheme commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-17-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS commitment assertion is not testing quota destinations
commitment. Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-16-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current DAMOS quota commitment assertion is not testing quota goal
commitment. Add the test.
Link: https://lkml.kernel.org/r/20250720171652.92309-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DamosQuota commitment assertion is hard-coded for a specific test case.
Split it out into a general version that can be reused for different test
cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DamosWatermarks commitment assertion is hard-coded for a specific test
case. Split it out into a general version that can be reused for
different test cases.
Link: https://lkml.kernel.org/r/20250720171652.92309-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add damos filters dumping for more
tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add ctx->ops.id dumping for more
tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drgn_dump_damon_status.py is a script for dumping DAMON internal status in
json format. It is being used for seeing if DAMON parameters that are set
using _damon_sysfs.py are actually passed to DAMON in the kernel space.
It is, however, not dumping full DAMON internal status, and it makes
increasing test coverage difficult. Add damos->migrate_dests dumping for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
nr_accesses and age are unsigned int. Use the proper max value.
Link: https://lkml.kernel.org/r/20250720171652.92309-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS action destination target_nid setup for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS action destinations setup for more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS quota goal nid setup for more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS quotas prioritization weights setup for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of the monitoring intervals auto-tune goal setup for
more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS filters setup for more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon/sysfs.py: test all parameters".
sysfs.py tests if DAMON sysfs interface is passing the user-requested
parameters to DAMON as expected. But only the default (minimum)
parameters are being tested. This is partially because _damon_sysfs.py,
which is the library for making the parameter requests, is not supporting
the entire parameters. The internal DAMON status dump script
(drgn_dump_damon_status.py) is also not dumping entire parameters. Extend
the test coverage by updating parameters input and status dumping scripts
to support all parameters, and writing additional tests using those.
This increased test coverage actually found one real bug
(https://lore.kernel.org/20250719181932.72944-1-sj@kernel.org).
First seven patches (1-7) extend _damon_sysfs.py for all parameters setup.
The eight patch (8) fixes _damon_sysfs.py to use correct max nr_acceses
and age values for their type. Following three patches (9-11) extend
drgn_dump_damon_status.py to dump full DAMON parameters. Following nine
patches (12-20) refactor sysfs.py for general testing code reuse, and
extend it for full parameters check. Finally, two patches (21 and 22) add
test cases in sysfs.py for full parameters testing.
This patch (of 22):
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface
control. Add support of DAMOS watermarks setup for more tests.
Link: https://lkml.kernel.org/r/20250720171652.92309-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250720171652.92309-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 4ece01897627 ("selftests/damon: add python and drgn-based DAMON
sysfs test") in mm-stable tree introduced sysfs.py that runs drgn for
dumping DAMON status. When the DAMON status dumping fails for reasons
including drgn uninstalled environment, the test fails without stopping
DAMON. Following DAMON selftests that assumes DAMON is not running when
they executed therefore fail. Catch dumping failures and stop DAMON for
that case.
Link: https://lkml.kernel.org/r/20250722060330.56068-1-sj@kernel.org
Fixes: 4ece01897627 ("selftests/damon: add python and drgn-based DAMON sysfs test")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507220707.9c5d6247-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As arm64 JIT now supports private stack, make sure all relevant tests
run on arm64 architecture.
Relevant tests:
#415/1 struct_ops_private_stack/private_stack:OK
#415/2 struct_ops_private_stack/private_stack_fail:OK
#415/3 struct_ops_private_stack/private_stack_recur:OK
#415 struct_ops_private_stack:OK
#549/1 verifier_private_stack/Private stack, single prog:OK
#549/2 verifier_private_stack/Private stack, subtree > MAX_BPF_STACK:OK
#549/3 verifier_private_stack/No private stack:OK
#549/4 verifier_private_stack/Private stack, callback:OK
#549/5 verifier_private_stack/Private stack, exception in mainprog:OK
#549/6 verifier_private_stack/Private stack, exception in subprog:OK
#549/7 verifier_private_stack/Private stack, async callback, not nested:OK
#549/8 verifier_private_stack/Private stack, async callback, potential nesting:OK
#549 verifier_private_stack:OK
Summary: 2/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250724120257.7299-4-puranjay@kernel.org
|
|
Recent commit to add NETFILTER_XTABLES_LEGACY missed setting
a couple of configs to y. They are still enabled but as modules
which appears to have upset BPF CI, e.g.:
test_bpf_nf_ct:FAIL:iptables-legacy -t raw -A PREROUTING -j CONNMARK --set-mark 42/0 unexpected error: 768 (errno 0)
Fixes: 3c3ab65f00eb ("selftests: net: Enable legacy netfilter legacy options.")
Link: https://patch.msgid.link/20250726155349.1161845-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Without this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload 12288 0
esp4 32768 1 esp4_offload
With this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Xiumei Mu <xmu@redhat.com>
Reviewed-by: Shannon Nelson <sln@onemain.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/6d3a1d777c4de4eb0ca94ced9e77be8d48c5b12f.1753415428.git.xmu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend vgic_init to test the nASSGIcap attribute, asserting that it is
configurable (within reason) prior to initializing the VGIC.
Additionally, check that userspace cannot set the attribute after the
VGIC has been initialized.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We have a lot of more or less useful vgic tests, but none of them
tracks the availability of GICv3 system registers, which is a bit
annoying.
Add one such test, which covers both EL1 and EL2 registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250718111154.104029-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
For arm64 64K page size, the xdp data size was set to be more than 64K
in one of previous patches. This will cause failure for bpf_dynptr_memset().
Since the failure of bpf_dynptr_memset() is expected with 64K page size,
return success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250725043440.209266-1-yonghong.song@linux.dev
|
|
For arm64 64K page size, the bpf_dynptr_copy() in test dynptr/test_dynptr_copy_xdp
will succeed, but the test will failure with 4K page size. This patch made a change
so the test will fail expectedly for both 4K and 64K page sizes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043435.208974-1-yonghong.song@linux.dev
|
|
With arm64 64K page size, the following 4 subtests failed:
#97/25 dynptr/test_probe_read_user_dynptr:FAIL
#97/26 dynptr/test_probe_read_kernel_dynptr:FAIL
#97/27 dynptr/test_probe_read_user_str_dynptr:FAIL
#97/28 dynptr/test_probe_read_kernel_str_dynptr:FAIL
These failures are due to function bpf_dynptr_check_off_len() in
include/linux/bpf.h where there is a test
if (len > size || offset > size - len)
return -E2BIG;
With 64K page size, the 'offset' is greater than 'size - len',
which caused the test failure.
For 64KB page size, this patch increased the xdp buffer size from 5000 to
90000. The above 4 test failures are fixed as 'size' value is increased.
But it introduced two new failures:
#97/4 dynptr/test_dynptr_copy_xdp:FAIL
#97/12 dynptr/test_dynptr_memset_xdp_chunks:FAIL
These two failures will be addressed in subsequent patches.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043430.208469-1-yonghong.song@linux.dev
|
|
Currently, UDP exchange is prone to failure when cmd attempt to send data
while socat in bkg is not ready. Since, the behavior is probabilistic, this
can result in flakiness for XDP tests. While testing
test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500
500 iterations was observed.
Use wait_port_listen() to ensure that the bkg socat is started and ready to
receive before cmd start sending. With proposed changes, a re-run of the
same test passed 100% of time.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many of the original rtla tests included durations of 1 minute and 30
seconds. Experience has shown this is unnecessary, since 10 seconds as
waiting time for samples to appear.
Change duration of all rtla tests to at most 10 seconds. This speeds up
testing significantly.
Before:
$ make check
All tests successful.
Files=3, Tests=54, 536 wallclock secs
( 0.03 usr 0.00 sys + 20.31 cusr 22.02 csys = 42.36 CPU)
Result: PASS
After:
$ make check
...
All tests successful.
Files=3, Tests=54, 196 wallclock secs
( 0.03 usr 0.01 sys + 20.28 cusr 20.68 csys = 41.00 CPU)
Result: PASS
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a bunch of tests covering most of both --on-threshold and --on-end.
Parts sensitive to implementation of hist/top are tested for both.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add argument to the check command in the test suite that takes a regular
expression that the output of rtla command is checked against. This
allows testing for specific information in rtla output in addition
to checking the return value.
Two minor improvements are included: running rtla with "eval" so that
arguments with spaces can be passed to it via shell quotations, and
the stdout of pushd and popd is suppressed to clean up the test output.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Implement actions on end next to actions on threshold. A new option,
--on-end is added, parallel to --on-threshold. Instead of being
executed whenever a latency threshold is reached, it is executed at the
end of the measurement.
For example:
$ rtla timerlat hist -d 5s --on-end trace
will save the trace output at the end.
All actions supported by --on-threshold are also supported by --on-end,
except for continue, which does nothing with --on-end.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Introduce option to resume tracing after a latency threshold overflow.
The option is implemented as an action named "continue".
Example:
$ rtla timerlat top -q -T 200 -d 1s --on-threshold \
exec,command="echo Threshold" --on-threshold continue
Threshold
Threshold
Threshold
Timer Latency
...
The feature is supported for both hist and top. After the continue
action is executed, processing of the list of actions is stopped and
tracing is resumed.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, rtla-timerlat BPF program uses a global variable stored in a
.bss section to store whether tracing has been stopped.
Move the information to a separate map, so that it is easily writable
from userspace, and add a function that clears the value, resuming
tracing after it has been stopped.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Extend the functionality provided by the -t/--trace option, which
triggers saving the contents of a tracefs buffer after tracing is
stopped, to support implementing arbitrary actions.
A new option, --on-threshold, is added, taking an argument
that further specifies the action. Actions added in this patch are:
- trace[,file=<filename>]: Saves tracefs buffer, optionally taking a
filename.
- signal,num=<sig>,pid=<pid>: Sends signal to process. "parent" might
be specified instead of number to send signal to parent process.
- shell,command=<command>: Execute shell command.
Multiple actions may be specified and will be executed in order,
including multiple actions of the same type. Trace output requested via
-t and -a now adds a trace action to the end of the list.
If an action fails, the following actions are not executed. For
example, this command:
$ rtla timerlat -T 20 --on-threshold trace \
--on-threshold shell,command="grep ipi_send timerlat_trace.txt" \
--on-threshold signal,num=2,pid=parent
will send signal 2 (SIGINT) to parent process, but only if saved trace
contains the text "ipi_send".
This way, the feature can be used for flexible reactions on latency
spikes, and allows combining rtla with other tooling like perf.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
After the introduction of BPF-based sample collection, rtla-timerlat
effectively runs in one of three modes:
- Pure BPF mode, with tracefs only being used to set up the timerlat
tracer. Sample processing and stop on threshold are handled by BPF.
- tracefs mode. BPF is unsupported or kernel is lacking the necessary
trace event (osnoise:timerlat_sample). Stop on theshold is handled by
timerlat tracer stopping tracing in all instances.
- BPF/tracefs mixed mode - BPF is used for sample collection for top or
histogram, tracefs is used for trace output and/or auto-analysis. Stop
on threshold is handled both through BPF program, which stops sample
collection for top/histogram and wakes up rtla, and by timerlat
tracer, which stops tracing for trace output/auto-analysis instances.
Add enum timerlat_tracing_mode, with three values:
- TRACING_MODE_BPF
- TRACING_MODE_TRACEFS
- TRACING_MODE_MIXED
Those represent the modes described above. A field of this type is added
to struct timerlat_params, named "mode", replacing the no_bpf variable.
params->mode is set in timerlat_{top,hist}_parse_args to
TRACING_MODE_BPF or TRACING_MODE_MIXED based on whether trace output
and/or auto-analysis is requested. timerlat_{top,hist}_main then checks
if BPF is not unavailable or disabled, in that case, it sets
params->mode to TRACING_MODE_TRACEFS.
A condition is added to timerlat_apply_config that skips setting
timerlat tracer thresholds if params->mode is TRACING_MODE_BPF (those
are unnecessary, since they only turn off tracing, which is already
turned off in that case, since BPF is used to collect samples).
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626123405.1496931-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check
whether IPv6 is enabled by verifying the existence of
`/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole
tests. If the file does not exist, the script will skip the test with an
appropriate message suggesting to verify if `CONFIG_IPV6` is enabled.
This prevents the test to misbehave if IPv6 is not configured.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add reproducer for [0] with a dummy device.
0: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com/
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723224715.1341121-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
