| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Greg lamented:
"Ick, sorry about that, obviously this test isn't actually built by any
bots :("
A quick and dirty way to prevent this problem going forward is to always
compile ndtest.ko whenever nfit_test is built. While this still does not
expose the test code to any of the known build bots, it at least makes
it the case that anyone that runs the x86 tests also compiles the
powerpc test.
I.e. the Intel NVDIMM maintainers are less likely to fall into this hole
in the future.
Link: http://lore.kernel.org/r/2023112729-aids-drainable-5744@gregkh
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170191437889.426826.15528612879942432918.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Validate the operation of rx and tx histogram counters, if supported
by the interface, by sending batches of packets targeted for each
bucket.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
/proc/sys/net/core/optmem_max is now per netns, change two tests
that were saving/changing/restoring its value on the parent netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both tests are almost same, only differs in two 'if' conditions, so
implemented in a single function. Tests check, that credit update
message is sent:
1) During setting SO_RCVLOWAT value of the socket.
2) When number of 'rx_bytes' become smaller than SO_RCVLOWAT value.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here is the test result after conversion.
# ./fdb_flush.sh
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: vx20: Expected 5 FDB entries, got 5 [ OK ]
...
TEST: vx10: Expected 5 FDB entries, got 5 [ OK ]
TEST: Test entries with dst 192.0.2.1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-14-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion.
# ./fib_tests.sh
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
...
Fib6 garbage collection test
TEST: ipv6 route garbage collection [ OK ]
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
Tests passed: 225
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-13-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion.
]# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
...
TEST: rule4 dsfield tcp connect (dsfield 0x07) [ OK ]
Tests passed: 66
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-12-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove PEER_CMD, which is not used in this test
Here is the test result after conversion.
]# ./fib-onlink-tests.sh
Error: ipv4: FIB table does not exist.
Flush terminated
Error: ipv6: FIB table does not exist.
Flush terminated
########################################
Configuring interfaces
...
TEST: Gateway resolves to wrong nexthop device - VRF [ OK ]
Tests passed: 38
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-11-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion.
]# ./fib_nexthops.sh
Basic functional tests
----------------------
TEST: List with nothing defined [ OK ]
TEST: Nexthop get on non-existent id [ OK ]
...
TEST: IPv6 resilient nexthop group torture test [ OK ]
Tests passed: 234
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-10-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion.
]# ./fib_nexthop_nongw.sh
TEST: nexthop: get route with nexthop without gw [ OK ]
TEST: nexthop: ping through nexthop without gw [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-9-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv4: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv6: host 0 to host 2, mtu 1350 [ OK ]
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-8-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here is the test result after conversion. There are some failures, but it
also exists on my system without this patch. So it's not affectec by
this patch and I will check the reason later.
]# time ./fcnal-test.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
IPv4 ping
###########################################################################
#################################################################
No VRF
SYSCTL: net.ipv4.raw_l3mdev_accept=0
TEST: ping out - ns-B IP [ OK ]
TEST: ping out, device bind - ns-B IP [ OK ]
TEST: ping out, address bind - ns-B IP [ OK ]
...
#################################################################
SNAT on VRF
TEST: IPv4 TCP connection over VRF with SNAT [ OK ]
TEST: IPv6 TCP connection over VRF with SNAT [ OK ]
Tests passed: 893
Tests failed: 21
real 52m48.178s
user 0m34.158s
sys 1m42.976s
BTW, this test needs a really long time. So expand the timeout to 1h.
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-6-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt6_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt4_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 18
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the name \${rt-${rt}} may make reader confuse, convert the variable
hs/rt in setup_rt/hs to hid, rid. Here is the test result after conversion.
]# ./srv6_end_dt46_l3vpn_test.sh
################################################################################
TEST SECTION: IPv6 routers connectivity test
################################################################################
TEST: Routers connectivity: rt-1 -> rt-2 [ OK ]
TEST: Routers connectivity: rt-2 -> rt-1 [ OK ]
...
TEST: IPv4 Hosts isolation: hs-t200-4 -X-> hs-t100-2 [ OK ]
Tests passed: 34
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a global variable NS_LIST to store all the namespaces that setup_ns
created, so the caller could call cleanup_all_ns() instead of remember
all the netns names when using cleanup_ns().
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We avoid printing forward declarations and prototypes for most
types by sorting things topologically. But if structs nest we
do need the forward declarations, there's no other way.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid infinite nesting store recursive structs by pointer.
If recursive struct is placed in the op directly - the first
instance can be stored by value. That makes the code much
less of a pain for majority of practical uses.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We try to keep the structures and helpers "topologically sorted",
to avoid forward declarations. When recursive nests are at play
we need to sort twice, because structs which end up being marked
as recursive will get a full set of forward declarations, so we
should ignore them for the purpose of sorting.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Track which nests are recursive. Non-recursive nesting gets
rendered in C as directly nested structs. For recursive
ones we need to put a pointer in, rather than full struct.
Track this information, no change to generated code, yet.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fill in more empty handlers for TypeUnused. When 'unused'
attr gets specified in a nested set we have to cleanly
skip it during code generation.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support genetlink families using simple fixed headers.
Assume fixed header is identical for all ops of the family for now.
Fixed headers are added to the request and reply structs as a _hdr
member, and copied to/from netlink messages appropriately.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 30c902001534 ("tools: ynl-gen: use enum name from the spec")
added pre-cooked user type for enums. Use it to fix ignoring
enum-name provided in the spec.
This changes a type in struct ethtool_tunnel_udp_entry but is
generally inconsequential for current families.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code gen generates a prototype for dump request free
in the header, but no implementation in the source.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231213231432.2944749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use both hex-based and string-based way to specify delegate mount
options for BPF FS.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231214225016.1209867-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/intel/iavf/iavf_ethtool.c
3a0b5a2929fd ("iavf: Introduce new state machines for flow director")
95260816b489 ("iavf: use iavf_schedule_aq_request() helper")
https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic")
c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.")
a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7")
1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips")
https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()")
84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters")
https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/
drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled")
cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present")
https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit extends test_tunnel selftest to test the new XDP xfrm state
lookup kfunc.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_progs is better than a shell script b/c C is a bit easier to
maintain than shell. Also it's easier to use new infra like memory
mapped global variables from C via bpf skeleton.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
vmlinux.h declarations are more ergnomic, especially when working with
kfuncs. The uapi headers are often incomplete for kfunc definitions.
This commit also switches bitfield accesses to use CO-RE helpers.
Switching to vmlinux.h definitions makes the verifier very
unhappy with raw bitfield accesses. The error is:
; md.u.md2.dir = direction;
33: (69) r1 = *(u16 *)(r2 +11)
misaligned stack access off (0x0; 0x0)+-64+11 size 2
Fix by using CO-RE-aware bitfield reads and writes.
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/884bde1d9a351d126a3923886b945ea6b1b0776b.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This helps with determinism b/c individual setup/teardown prevents
leaking state between different subtests.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/0fb59fa16fb58cca7def5239df606005a3e8dd0e.1702593901.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It's hard to distinguish the default cycles events among hybrid PMUs.
For example,
$ perf top
Available samples
385 cycles:P
903 cycles:P
The other tool, e.g., perf record, uniforms the event name and adds the
hybrid PMU name before opening the event. So the events can be easily
distinguished. Apply the same methodology for the perf top as well.
The evlist__uniquify_name() will be invoked by both record and top.
Move it to util/evlist.c
With the patch:
$ perf top
Available samples
148 cpu_atom/cycles:P/
1K cpu_core/cycles:P/
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231214144612.1092028-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf top errors out on a hybrid machine
$perf top
Error:
The cycles:P event is not supported.
The perf top expects that the "cycles" is collected on all CPUs in the
system. But for hybrid there is no single "cycles" event which can cover
all CPUs. Perf has to split it into two cycles events, e.g.,
cpu_core/cycles/ and cpu_atom/cycles/. Each event has its own CPU mask.
If a event is opened on the unsupported CPU. The open fails. That's the
reason of the above error out.
Perf should only open the cycles event on the corresponding CPU. The
commit ef91871c960e ("perf evlist: Propagate user CPU maps intersecting
core PMU maps") intersect the requested CPU map with the CPU map of the
PMU. Use the evsel's cpus to replace user_requested_cpus.
The evlist's threads are also propagated to the evsel's threads in
__perf_evlist__propagate_maps(). For a system-wide event, perf appends
a dummy event and assign it to the evsel's threads. For a per-thread
event, the evlist's thread_map is assigned to the evsel's threads. The
same as the other tools, e.g., perf record, using the evsel's threads
when opening an event.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/ZXNnDrGKXbEELMXV@kernel.org/
Link: https://lore.kernel.org/r/20231214144612.1092028-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The base address of a DSO mapping should start at the start of the file.
Usually DSOs are mapped from the pgoff 0 so it doesn't matter when it
uses the start of the map address.
But generated DSOs for JIT codes doesn't start from the 0 so it should
subtract the offset to calculate the .eh_frame table offsets correctly.
Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Usually DSOs are mapped from the beginning of the file, so the base
address of the DSO can be calculated by map->start - map->pgoff.
However, JIT DSOs which are generated by `perf inject -j`, are mapped
only the code segment. This makes unwind-libdw code confusing and
rejects processing unwinds in the JIT DSOs. It should use the map
start address as base for them to fix the confusion.
Fixes: 1fe627da30331024 ("perf unwind: Take pgoff into account when reporting elf to libdwfl")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The text section starts after the ELF headers so PHDR.p_vaddr and
others should have the correct addresses.
Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -A or --no-aggr option disables aggregation of core events:
$ perf stat -A -e cycles,data_total -a true
Performance counter stats for 'system wide':
CPU0 1,287,665 cycles
CPU1 1,831,681 cycles
CPU2 27,345,998 cycles
CPU3 1,964,799 cycles
CPU4 236,174 cycles
CPU5 3,302,825 cycles
CPU6 9,201,446 cycles
CPU7 1,403,043 cycles
CPU0 110.90 MiB data_total
0.008961761 seconds time elapsed
The --no-merge option disables the aggregation of uncore events:
$ perf stat --no-merge -e cycles,data_total -a true
Performance counter stats for 'system wide':
38,482,778 cycles
15.04 MiB data_total [uncore_imc_free_running_1]
15.00 MiB data_total [uncore_imc_free_running_0]
0.005915155 seconds time elapsed
Having two options confuses users who generally don't appreciate the
difference in PMUs. Keep all the options but make it so they all
disable aggregation both of core and uncore events:
$ perf stat -A -e cycles,data_total -a true
Performance counter stats for 'system wide':
CPU0 85,878 cycles
CPU1 88,179 cycles
CPU2 60,872 cycles
CPU3 3,265,567 cycles
CPU4 82,357 cycles
CPU5 83,383 cycles
CPU6 84,156 cycles
CPU7 220,803 cycles
CPU0 2.38 MiB data_total [uncore_imc_free_running_0]
CPU0 2.38 MiB data_total [uncore_imc_free_running_1]
0.001397205 seconds time elapsed
Update the relevant 'perf stat' man page information.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231214060256.2094017-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Initial selftest for the new statmount() and listmount() syscalls.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231213161104.403171-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix test broken by shared umem test and framework enhancement commit.
Correct the current implementation of pkt_stream_replace_half() by
ensuring that nb_valid_entries are not set to half, as this is not true
for all the tests. Ensure that the expected value for valid_entries for
the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent,
which is 4096.
Create a new function called pkt_stream_pkt_set() that allows for packet
modification to meet specific requirements while ensuring the accurate
maintenance of the valid packet count to prevent inconsistencies in packet
tracking.
Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com
|
|
Add test to sockmap_basic to ensure af_unix sockets that are not connected
can not be added to the map. Ensure we keep DGRAM sockets working however
as these will not be connected typically.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231201180139.328529-3-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Verify, whether VLAN tag and proto are set correctly.
To simulate "stripped" VLAN tag on veth, send test packet from VLAN
interface.
Also, add TO_STR() macro for convenience.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-19-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The easiest way to simulate stripped VLAN tag in veth is to send a packet
from VLAN interface, attached to veth. Unfortunately, this approach is
incompatible with AF_XDP on TX side, because VLAN interfaces do not have
such feature.
Check both packets sent via AF_XDP TX and regular socket.
AF_INET packet will also have a filled-in hash type (XDP_RSS_TYPE_L4),
unlike AF_XDP packet, so more values can be checked.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231205210847.28460-18-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add VLAN hint to the xdp_hw_metadata program.
Also, to make metadata layout more straightforward, add flags field
to pass information about validity of every separate hint separately.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-17-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make VLAN c-tag and s-tag XDP hint testing more convenient
by not skipping VLAN-ed packets.
Allow both 802.1ad and 802.1Q headers.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20231205210847.28460-16-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement functionality that enables drivers to expose VLAN tag
to XDP code.
VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20231205210847.28460-10-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add new subtest validating LIBBPF_BPF_TOKEN_PATH envvar semantics.
Extend existing test to validate that LIBBPF_BPF_TOKEN_PATH allows to
disable implicit BPF token creation by setting envvar to empty string.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To allow external admin authority to override default BPF FS location
(/sys/fs/bpf) for implicit BPF token creation, teach libbpf to recognize
LIBBPF_BPF_TOKEN_PATH envvar. If it is specified and user application
didn't explicitly specify neither bpf_token_path nor bpf_token_fd
option, it will be treated exactly like bpf_token_path option,
overriding default /sys/fs/bpf location and making BPF token mandatory.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test to validate libbpf's implicit BPF token creation from default
BPF FS location (/sys/fs/bpf). Also validate that disabling this
implicit BPF token creation works.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a few tests that attempt to load BPF object containing privileged
map, program, and the one requiring mandatory BTF uploading into the
kernel (to validate token FD propagation to BPF_BTF_LOAD command).
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231213190842.3844987-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
