| Age | Commit message (Collapse) | Author | Files | Lines |
|
Similar to IPIP, introduce specific selftest for IP6IP6 flowtable SW
acceleration in nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
/proc/sys/net/core/netdev_rss_key got bigger (256 bytes instead of 52)
Fixes: 37b0ea8fef56 ("net: expand NETDEV_RSS_KEY_LEN to 256 bytes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260127174806.886561-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bug in assoc_sk_only_mismatch() and
assoc_sk_only_mismatch_tx() that creates a race condition which
triggers test flakes in later test cases e.g. data_send_bad_key().
The problem is that the client uses the "conn clr" rpc to setup a data
connection with psp_responder, but never uses a matching "data close"
rpc. This creates a race condition where if the client can queue
another data sock request, like in data_send_bad_key(), before the
server can accept the old connection from the backlog we end up in a
situation where we have two connections in the backlog: one for the
closed connection we have received a FIN for, and one for the new PSP
connection which is expecting to do key exchange.
From there the server pops the closed connection from the backlog, but
the data_send_bad_key() test case in psp.py hangs waiting to perform
key exchange.
The fix is to properly use _conn_close, which fill force the server to
remove the closed connection from the backlog before sending the RPC
ack to the client.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260127-psp-flaky-test-v1-1-13403e390af3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PTP hardware clock (PHC) devices may return -EOPNOTSUPP for
operations like settime, adjtime, or adjfreq. This commonly occurs
with timestamp-only PHC implementations that don't support full clock
control.
For background, syzbot previously exposed a crash risk when PTP clock
drivers lacked required callbacks[1]. Subsequent work[2] made callback
presence a registration requirement. As a result, some drivers (like
iwlwifi MVM/MLD[3]) now provide stub callbacks that return -EOPNOTSUPP
for unsupported operations.
When phc_ctl encounters such devices, the "Operation not supported"
error should be treated as a skip (device limitation) rather than a
test failure. This patch:
- Adds [SKIP] output handling in log_test()
- Detects "Operation not supported" from phc_ctl and returns ksft_skip
- Returns ksft_skip if all tests are skipped, preventing false-positive
results when testing timestamp-only PHC implementations
Link: https://lore.kernel.org/netdev/20251028043216.1971292-1-junjie.cao@intel.com/ [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dfb073d32cac [2]
Link: https://lore.kernel.org/netdev/20251204123204.9316-1-ziyao@disroot.org/ [3]
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-2-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kselftest framework defines KSFT_SKIP=4 as the standard exit code
for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and
'exit 1' to indicate skip conditions, which can confuse test harnesses
and CI systems.
This patch introduces ksft_skip=4 variable and unifies all skip exit
paths to use 'exit $ksft_skip', consistent with other selftests like
net/lib.sh and net/fib_nexthops.sh.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-1-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-12-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-11-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-10-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-9-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-8-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These functions are reused by the VM tests to collect and compare dmesg
warnings and oops counts. The future VM-specific tests use them heavily.
This patches relies on vm_ssh() already supporting namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-7-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-6-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add functions for initializing namespaces with the different vsock NS
modes. Callers can use add_namespaces() and del_namespaces() to create
namespaces global0, global1, local0, and local1.
The add_namespaces() function initializes global0, local0, etc... with
their respective vsock NS mode by toggling child_ns_mode before creating
the namespace.
Remove namespaces upon exiting the program in cleanup(). This is
unlikely to be needed for a healthy run, but it is useful for tests that
are manually killed mid-test.
This patch is in preparation for later namespace tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-5-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Increase the timeout from 300s to 1200s. On a modern bare metal server
my last run showed the new set of tests taking ~400s. Multiply by an
(arbitrary) factor of three to account for slower/nested runners.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-4-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __exit__ method receives ex_type as the exception class when an
exception occurs. The previous code used implicit boolean evaluation:
terminate = self.terminate or (self._exit_wait and ex_type)
^^^^^^^^^^^
In Python, the and operator can be used with non-boolean values, but it
does not always return a boolean result.
This is probably not what we want, because 'self._exit_wait and ex_type'
could return the actual ex_type value (the exception class) rather than
a boolean True when an exception occurs.
Use explicit `ex_type is not None` check to properly evaluate whether
an exception occurred, returning a boolean result.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260125105524.773993-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To improve the robustness and coverage of the TUN selftests, this
patch expands the set of test data.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/5054f3ad9f3dbfe33b827183fccc5efeb8fd0da7.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test validate that GSO information are correctly exposed
when reading packets from a TUN device.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/fe75ac66466380490eba858eef50596a1bfbd071.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test constructs a raw packet, prepends a virtio_net_hdr,
and writes the result to the TUN device. This mimics the behavior
of a vm forwarding a guest's packet to the host networking stack.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/a988dbc9ca109e4f1f0b33858c5035bce8ebede3.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for testing GSO over UDP tunnels, enhance the test
infrastructure to support a more complex data path involving a TUN
device and a GENEVE udp tunnel.
This patch introduces a dedicated setup/teardown topology that creates
both a GENEVE tunnel interface and a TUN interface. The TUN device acts
as the VTEP (Virtual Tunnel Endpoint), allowing it to send and receive
virtio-net packets. This setup effectively tests the kernel's data path
for encapsulated traffic.
Note that after adding a new address to the UDP tunnel, we need to wait
a bit until the associated route is available.
Additionally, a new data structure is defined to manage test parameters.
This structure is designed to be extensible, allowing different test
data and configurations to be easily added in subsequent patches.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/b5787b8c269f43ce11e1756f1691cc7fd9a1e901.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous patch introduced common tuntap helpers to simplify
tun test code. This patch refactors the tun_delete function to
use these new helpers.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/ecc7c0c2d75d87cb814e97579e731650339703ab.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce rtnetlink manipulation and packet construction helpers that
will simplify the later creation of more related test cases. This avoids
duplicating logic across different test cases.
This new header will contain:
- YNL-based netlink management utilities.
- Helpers for ip link, ip address, ip neighbor and ip route operations.
- Packet construction and manipulation helpers.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/91f905715c69c75f7bf72d43388921fde6c34989.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for adding new tests for GSO over UDP tunnels,
apply consistently the kernel style to the existing code.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/d797de1e5a3d215dd78cb46775772ef682bab60e.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a simple, netns-based topology with double, nested UDP tunnels and
perform TSO transfers on top.
Explicitly enable GSO and/or GRO and check the skb layout consistency with
different configuration allowing (or not) GSO frames to be delivered on
the other end.
The trickest part is account in a robust way the aggregated/unaggregated
packets with double encapsulation: use a classic bpf filter for it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/61f2c98ba0f73057c2d6f6cb62eb807abd90bf6b.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RFC 4884 extended certain ICMP messages with a length attribute that
encodes the length of the "original datagram" field. This is needed so
that new information could be appended to these messages without
applications thinking that it is part of the "original datagram" field.
In version 5.9, the kernel was extended with two new socket options
(SOL_IP/IP_RECVERR_4884 and SOL_IPV6/IPV6_RECVERR_RFC4884) that allow
user space to retrieve this length which is basically the offset to the
ICMP Extension Structure at the end of the ICMP message. This is
required by user space applications that need to parse the information
contained in the ICMP Extension Structure. For example, the RFC 5837
extension for tracepath.
Add a selftest that verifies correct handling of the RFC 4884 length
field for both IPv4 and IPv6, with and without extension structures,
and validates that malformed extensions are correctly reported as invalid.
For each address family, the test creates:
- a raw socket used to send locally crafted ICMP error packets to the
loopback address, and
- a datagram socket used to receive the encapsulated original datagram
and associated error metadata from the kernel error queue.
ICMP packets are constructed entirely in user space rather than relying
on kernel-generated errors. This allows the test to exercise invalid
scenarios (such as corrupted checksums and incorrect length fields) and
verify that the SO_EE_RFC4884_FLAG_INVALID flag is set as expected.
Output Example:
$ ./icmp_rfc4884
Starting 18 tests from 18 test cases.
RUN rfc4884.ipv4_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_ext_small_payload.rfc4884
ok 1 rfc4884.ipv4_ext_small_payload.rfc4884
RUN rfc4884.ipv4_ext.rfc4884 ...
OK rfc4884.ipv4_ext.rfc4884
ok 2 rfc4884.ipv4_ext.rfc4884
RUN rfc4884.ipv4_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_ext_large_payload.rfc4884
ok 3 rfc4884.ipv4_ext_large_payload.rfc4884
RUN rfc4884.ipv4_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_small_payload.rfc4884
ok 4 rfc4884.ipv4_no_ext_small_payload.rfc4884
RUN rfc4884.ipv4_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_min_payload.rfc4884
ok 5 rfc4884.ipv4_no_ext_min_payload.rfc4884
RUN rfc4884.ipv4_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_large_payload.rfc4884
ok 6 rfc4884.ipv4_no_ext_large_payload.rfc4884
RUN rfc4884.ipv4_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_checksum.rfc4884
ok 7 rfc4884.ipv4_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_small.rfc4884
ok 8 rfc4884.ipv4_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_large.rfc4884
ok 9 rfc4884.ipv4_invalid_ext_length_large.rfc4884
RUN rfc4884.ipv6_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_ext_small_payload.rfc4884
ok 10 rfc4884.ipv6_ext_small_payload.rfc4884
RUN rfc4884.ipv6_ext.rfc4884 ...
OK rfc4884.ipv6_ext.rfc4884
ok 11 rfc4884.ipv6_ext.rfc4884
RUN rfc4884.ipv6_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_ext_large_payload.rfc4884
ok 12 rfc4884.ipv6_ext_large_payload.rfc4884
RUN rfc4884.ipv6_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_small_payload.rfc4884
ok 13 rfc4884.ipv6_no_ext_small_payload.rfc4884
RUN rfc4884.ipv6_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_min_payload.rfc4884
ok 14 rfc4884.ipv6_no_ext_min_payload.rfc4884
RUN rfc4884.ipv6_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_large_payload.rfc4884
ok 15 rfc4884.ipv6_no_ext_large_payload.rfc4884
RUN rfc4884.ipv6_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_checksum.rfc4884
ok 16 rfc4884.ipv6_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_small.rfc4884
ok 17 rfc4884.ipv6_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_large.rfc4884
ok 18 rfc4884.ipv6_invalid_ext_length_large.rfc4884
PASSED: 18 / 18 tests passed.
Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260121114644.2863640-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
|
|
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fix from Namhyung Kim:
"A minor fix for error handling in the event parser"
* tag 'perf-tools-fixes-for-v6.19-2026-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf parse-events: Fix evsel allocation failure
|
|
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new netconsole selftest to validate that netconsole is able
to resume a deactivated target when the low level interface comes back.
The test setups the network using netdevsim, creates a netconsole target
and then remove/add netdevsim in order to bring the same interfaces
back. Afterwards, the test validates that the target works as expected.
Targets are created via cmdline parameters to the module to ensure that
we are able to resume targets that were bound by mac and interface name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-7-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ca9d74eb5f6a ("uapi: add INT_MAX and INT_MIN constants")
recently removed some includes of limits.h in uAPI headers.
ncdevmem.c was depending on them:
ncdevmem.c: In function ‘ethtool_add_flow’:
ncdevmem.c:369:60: error: ‘INT_MAX’ undeclared (first use in this function)
369 | if (endptr == id_start || flow_id < 0 || flow_id > INT_MAX)
| ^~~~~~~
ncdevmem.c:77:1: note: ‘INT_MAX’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’?
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260120180319.1673271-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend HW timestamp tests to check that ioctl interface is not broken
and configuration setups and requests are equal to netlink interface.
Some linter warnings are disabled because of ctypes classes.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260116062121.1230184-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
Add support for providers with large rx buffer
Many modern NICs support configurable receive buffer lengths, and zcrx and
memory providers can use buffers larger than 4K to improve performance.
When paired with hw-gro larger rx buffer sizes can drastically reduce
the number of buffers traversing the stack and save a lot of processing
time. It also allows to give to users larger contiguous chunks of data.
Single stream benchmarks showed up to ~30% CPU util improvement.
E.g. comparison for 4K vs 32K buffers using a 200Gbit NIC:
packets=23987040 (MB=2745098), rps=199559 (MB/s=22837)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 1.53 0.00 27.78 2.72 1.31 66.45 0.22
packets=24078368 (MB=2755550), rps=200319 (MB/s=22924)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 0.69 0.00 8.26 31.65 1.83 57.00 0.57
This series adds net infrastructure for memory providers configuring
the size and implements it for bnxt. It's an opt-in feature for drivers,
they should advertise support for the parameter in the qops and must check
if the hardware supports the given size. It's limited to memory providers
as it drastically simplifies implementation. It doesn't affect the fast
path zcrx uAPI, and the user exposed parameter is defined in zcrx terms,
which allows it to be flexible and adjusted in the future.
A liburing example can be found at [2]
full branch:
[1] https://github.com/isilence/linux.git zcrx/large-buffers-v8
Liburing example:
[2] https://github.com/isilence/liburing.git zcrx/rx-buf-len
* tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linux:
io_uring/zcrx: document area chunking parameter
selftests: iou-zcrx: test large chunk sizes
eth: bnxt: support qcfg provided rx page size
eth: bnxt: adjust the fill level of agg queues with larger buffers
eth: bnxt: store rx buffer size per queue
net: pass queue rx page size from memory provider
net: add bare bone queue configs
net: reduce indent of struct netdev_queue_mgmt_ops members
net: memzero mp params when closing a queue
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 77b9c4a438fc66e2ab004c411056b3fb71a54f2c, reversing
changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497:
931420a2fc36 ("selftests/net: Add netkit container tests")
ab771c938d9a ("selftests/net: Make NetDrvContEnv support queue leasing")
6be87fbb2776 ("selftests/net: Add env for container based tests")
61d99ce3dfc2 ("selftests/net: Add bpf skb forwarding program")
920da3634194 ("netkit: Add xsk support for af_xdp applications")
eef51113f8af ("netkit: Add netkit notifier to check for unregistering devices")
b5ef109d22d4 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create")
b5c3fa4a0b16 ("netkit: Add single device mode for netkit")
0073d2fd679d ("xsk: Proxy pool management for leased queues")
1ecea95dd3b5 ("xsk: Extend xsk_rcv_check validation")
804bf334d08a ("net: Proxy netdev_queue_get_dma_dev for leased queues")
0caa9a8ddec3 ("net: Proxy net_mp_{open,close}_rxq for leased queues")
ff8889ff9107 ("net, ethtool: Disallow leased real rxqs to be resized")
9e2103f36110 ("net: Add lease info to queue-get response")
31127deddef4 ("net: Implement netdev_nl_queue_create_doit")
a5546e18f77c ("net: Add queue-create operation")
The series will conflict with io_uring work, and the code needs more
polish.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This tool is built by default, but was not being installed by default
when running `make install`. Fix this by calling ynltool's install
target.
Signed-off-by: Michel Lind <michel@michel-slm.name>
Link: https://patch.msgid.link/aWqr9gUT4hWZwwcI@mbp-m3-fedora.vm
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit implemented logic to discover available vsock transports by
grepping /proc/kallsyms for known symbols. It incorrectly filtered entries
by type 'd'.
For some kernel configs having
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VSOCKETS_LOOPBACK=y
kallsyms reports
0000000000000000 d virtio_transport [vmw_vsock_virtio_transport]
0000000000000000 t loopback_transport
Overzealous filtering might have affected vsock test suit, resulting in
insufficient/misleading testing.
Do not filter symbols by type. It never helped much.
Fixes: 3070c05b7afd ("vsock/test: Introduce get_transports()")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260116-vsock_test-kallsyms-grep-v1-1-3320bc3346f2@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two tests using NetDrvContEnv. One basic test that sets up a netkit
pair, with one end in a netns. Use LOCAL_PREFIX_V6 and nk_forward BPF
program to ping from a remote host to the netkit in netns.
Second is a selftest for netkit queue leasing, using io_uring zero copy
test binary inside of a netns with netkit. This checks that memory
providers can be bound against virtual queues in a netkit within a
netns that are leasing from a physical netdev in the default netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-17-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new parameter `lease` to NetDrvContEnv that sets up queue leasing
in the env.
The NETIF also has some ethtool parameters changed to support memory
provider tests. This is needed in NetDrvContEnv rather than individual
test cases since the cleanup to restore NETIF can't be done, until the
netns in the env is gone.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-16-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-15-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add nk_forward.bpf.c, a BPF program that forwards skbs matching some IPv6
prefix received on eth0 ifindex to a specified netkit ifindex. This will
be needed by netkit container tests.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-14-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queue
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is currently only intended for
dumping as part of the queue-get operation. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260115082603.219152-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest that attempts to add a teql qdisc as a qfq child.
Since teql _must_ be added as a root qdisc, the kernel should reject
this.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following warning is encountered when building selftests on powerpc/32.
CC csum
csum.c: In function 'recv_get_packet_csum_status':
csum.c:710:50: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
711 | cm->cmsg_len, CMSG_LEN(sizeof(struct tpacket_auxdata)));
| ~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
csum.c:710:63: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
cm->cmsg_len has type __kernel_size_t and CMSG() macro has the type
returned by sizeof() which is size_t.
size_t is 'unsigned int' on some platforms and 'unsigned long' on
other ones so use %zu instead of %lu.
The code in question was introduced by
commit 91a7de85600d ("selftests/net: add csum offload test").
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/8b69b40826553c1dd500d9d25e45883744f3f348.1768556791.git.chleroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a simple ipvtap test to test handling
IP-address add/remove on ipvlan interface.
It creates a veth-interface and then creates several
network-namespace with ipvlan0 interface in it linked to veth.
Then it starts to add/remove addresses on ipvlan0 interfaces
in several threads.
At finish, it checks that there is no duplicated addresses.
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes TCP handling, tests, documentation, non-audit elided code,
and minor cosmetic changes"
* tag 'landlock-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the IOCTL access right
selftests/landlock: Properly close a file descriptor
landlock: Improve the comment for domain_is_scoped
selftests/landlock: Use scoped_base_variants.h for ptrace_test
selftests/landlock: Fix missing semicolon
selftests/landlock: Fix typo in fs_test
landlock: Optimize stack usage when !CONFIG_AUDIT
landlock: Fix spelling
landlock: Clean up hook_ptrace_access_check()
landlock: Improve erratum documentation
landlock: Remove useless include
landlock: Fix wrong type usage
selftests/landlock: NULL-terminate unix pathname addresses
selftests/landlock: Remove invalid unix socket bind()
selftests/landlock: Add missing connect(minimal AF_UNSPEC) test
selftests/landlock: Fix TCP bind(AF_UNSPEC) test case
landlock: Fix TCP handling of short AF_UNSPEC addresses
landlock: Fix formatting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix resctrl initialization on Hygon CPUs
- Fix resctrl memory bandwidth counters on Hygon CPUs
- Fix x86 self-tests build bug
* tag 'x86-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Add selftests include path for kselftest.h after centralization
x86/resctrl: Fix memory bandwidth counter width for Hygon
x86/resctrl: Add missing resctrl initialization for Hygon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix two objtool build failures that trigger in uncommon build
environments"
* tag 'objtool-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: fix build failure due to missing libopcodes check
objtool: fix compilation failure with the x32 toolchain
|
|
Improve the error handling in passive TFO test to check the return value
from sendto(), and to fail if read() or fprintf() failed.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/24707c8133f7095c0e5a94afa69e75c3a80bf6e7.1768312014.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|