| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add tests where one link has different rates of packet loss or reorders
packets. PRP should still be able to recover from these link faults and
show no packet loss. However, it is acceptable to receive some level of
duplicate packets. This matches the current specification (IEC
62439-3:2021) of the duplicate discard algorithm that requires it to be
"designed such that it never rejects a legitimate frame, while occasional
acceptance of a duplicate can be tolerated." The rate of acceptable
duplicates in this test is intentionally high (10%) to make the test
stable, the values I observed in the worst test cases (20% loss) are around
5% duplicates.
The duplicates occur because of the 10ms ping interval in the test. As
blocks expire after 400ms based on the timestamp of the first received
sequence number in the block, every approx. 40th will lead to a new, clean
block being used where the sequence number hasn't been seen before. As this
occurs on both nodes in the test (for requests and replies), we observe
around 20 duplicate frames.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/7b36506d3a80e53786fe56526cf6046c74dfeee1.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case that can support different types of faulty links for all
protocol versions (HSRv0, HSRv1, PRPv1). It starts with a baseline with
fully functional links. The first faulty case is one link being cut during
the ping. This test uses a different function for ping that sends more
packets in shorter intervals to stress the duplicate detection algorithms a
bit more and allow for future tests with other link faults (packet loss,
reordering, etc.).
As the link fault tests now cover the cut link for HSR and PRP, it can be
removed from the hsr_ping test. Note that the removed cut link test did not
really test the fault because do_ping_long takes about 1sec while the link
is only cut after a 3sec sleep.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/dad52276e2c349ecb96168bef7e3001bf7becc81.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously the hsr_ping test only checked that all nodes in a VLAN are
reachable (using do_ping). Update the test to also check that there is no
packet loss and no duplicate packets by running the same tests for VLANs as
without VLANs (including using do_ping_long). This also adds tests for IPv6
over VLAN. To unify the test code, the topology without VLANs now uses IP
addresses from dead:beef:0::/64 to align with the 100.64.0.0/24 range for
IPv4. Error messages are updated across the board to make it easier to find
what actually failed.
Also update the VLAN test to only run in VLAN 2, as there is no need to
check if ping really works with VLAN IDs 2, 3, 4, and 5. This lowers the
number of long ping tests on VLANs to keep the overall test runtime in
bounds.
It's still necessary to bump the test timeout a bit, though: a ping long
tests takes 1sec, do_ping_tests performs 12 of them, do_link_problem_tests
6, and the VLAN tests again 12. With some buffer for setup and waiting and
for two protocol versions, 90sec timeout seems reasonable.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/e3ded0e2547b5f720524b62fabeb96debc579697.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest for PRP that performs a basic ping test on IPv4 and IPv6,
over the plain PRP interface and a VLAN interface, similar to the existing
ping test for HSR. The test first checks reachability of the other node,
then checks for no loss and no duplicates.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/4a342189e842d7308d037da72af566729ee75834.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extend ynltool to compute HW GRO savings metric - how many
packets has HW GRO been able to save the kernel from seeing.
Note that this definition does not actually take into account
whether the segments were or weren't eligible for HW GRO.
If a machine is receiving all-UDP traffic - new metric will show
HW-GRO savings of 0%. Conversely since the super-packet still
counts as a received packet, savings of 100% is not achievable.
Perfect HW-GRO on a machine with 4k MTU and 64kB super-frames
would show ~93.75% savings. With 1.5k MTU we may see up to
~97.8% savings (if my math is right).
Example after 10 sec of iperf on a freshly booted machine
with 1.5k MTU:
$ ynltool qstats show
eth0 rx-packets: 40681280 rx-bytes: 61575208437
rx-alloc-fail: 0 rx-hw-gro-packets: 1225133
rx-hw-gro-wire-packets: 40656633
$ ynltool qstats hw-gro
eth0: 96.9% savings
None of the NICs I have access to can report "missed" HW-GRO
opportunities so computing a true "effectiveness" metric
is not possible. One could also argue that effectiveness metric
is inferior in environments where we control both senders and
receivers, the savings metrics will capture both regressions
in receiver's HW GRO effectiveness but also regressions in senders
sending smaller TSO trains. And we care about both. The main
downside is that it's hard to tell at a glance how well the NIC
is doing because the savings will be dependent on traffic patterns.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260207003509.3927744-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic to open a socket and dump the queues is the same
across sub-commands. Factor it out, we'll need it again.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260207003509.3927744-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and Netfilter.
Previous releases - regressions:
- eth: stmmac: fix stm32 (and potentially others) resume regression
- nf_tables: fix inverted genmask check in nft_map_catchall_activate()
- usb: r8152: fix resume reset deadlock
- fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for RSS contexts
Previous releases - always broken:
- sched: cls_u32: use skb_header_pointer_careful() to avoid OOB reads
with malicious u32 rules
- eth: ice: timestamping related fixes"
* tag 'net-6.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
gve: Correct ethtool rx_dropped calculation
gve: Fix stats report corruption on queue count change
selftest: net: add a test-case for encap segmentation after GRO
net: gro: fix outer network offset
net: add proper RCU protection to /proc/net/ptype
net: ethernet: adi: adin1110: Check return value of devm_gpiod_get_optional() in adin1110_check_spi()
wifi: iwlwifi: mvm: pause TCM on fast resume
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
net: spacemit: k1-emac: fix jumbo frame support
net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4
net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4
net: enetc: Remove CBDR cacheability AXI settings for ENETC v4
net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4
tipc: use kfree_sensitive() for session key material
net: stmmac: fix stm32 (and potentially others) resume regression
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts
...
|
|
When executing the last MPTCP selftests on older kernels, this output is
printed:
# 001 no JOIN
# join Rx [SKIP]
# join Tx [SKIP]
# fallback [SKIP]
In fact, behind each line, a few counters are checked, and likely not
all of them have been skipped because the they are not available on
these kernels. Instead, "new" and unsupported counters for these groups
are now ignored, and [ OK ] will be printed instead of [SKIP].
Note that on the MPTCP CI, when validating the dev versions, any
unsupported counter will cause the tests to fail. So this is safe not to
print 'SKIP' for these group checks.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-15-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To the TFO, only the file descriptor is needed, the family is not.
Also, the error can be handled the same way when 'sendto()' or
'connect()' are used. Only the printed error message is different.
This avoids a bit of confusions.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-14-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A few loops were declaring 'i', but this variable was not used.
To avoid confusions, use '_' instead: it is more explicit to mark that
this variable is not needed.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-13-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nstat outputs are already printed when calling 'fail_test', no need to
do it again.
While at it, no need to use the dump_stats variable, print the extra
stats directly. And use 'ip -n $ns' instead of 'ip netns exec $ns',
shorter and clearer.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-12-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of waiting for a random amount of time (1 second), wait for an
event to be received on the other side.
To do that, when an address is announced (userspace_pm_add_addr), the
ANNOUNCED is expected. When a new subflow is created
(userspace_pm_add_sf), the SUB_ESTABLISHED event is expected.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-11-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It looks like most of the time, this helper was simply waiting a bit
more than one second: the previous MPJoin counter was often already at
the expected value. So at the end, it was just checking 10 times for
the MPJoin counter to change, but it was not happening. For the tests,
that was time, it was just waiting longer for nothing.
Instead, use 'wait_mpj' with the expected counter: in the tests, the MPJ
counter can easily be predicted. While at it, stop passing the netns as
argument: here the received MPJoin ACK is checked, which happens on the
server side. If later on, this needs to be checked on the client side,
the helper can be adapted for this case, but better avoid confusions now
if it is not needed.
While at it, stop using 'i' for the variable if it is not used.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-10-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'wait_mpj' was used just after having created a background connection,
but before creating new subflows. So no MPJ were sent. The intention was
to wait for the connection to be established, which was the same as
doing a simple sleep with a "random" value.
Instead, wait for an "established" event. With this, the tests can
finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-9-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This file is the only one from this directory not to have all these
header inclusions sorted by type and alphabetical order.
Adapt them, to ease the reading, prevent conflicts during potential
future backport modifying these lines, and also to avoid having UAPI
header inclusions before libc ones, see [1].
Link: https://lore.kernel.org/20260120-uapi-sockaddr-v2-1-63c319111cf6@linutronix.de
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-8-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
|
|
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
|
|
We had a few patches in this area and no explicit coverage so far.
The test case covers the scenario addressed by the previous fix;
reusing the existing udpgro_fwd.sh script to leverage part of the
of the virtual network setup, even if such script is possibly not
a perfect fit.
Note that the mentioned script already contains several shellcheck
violation; this patch does not fix the existing code, just avoids
adding more issues in the new one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/768ca132af81e83856e34d3105b86c37e566a7ad.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linux Accurate ECN test sets using ACE counters and AccECN options to
cover several scenarios: Connection teardown, different ACK conditions,
counter wrapping, SACK space grabbing, fallback schemes, negotiation
retransmission/reorder/loss, AccECN option drop/loss, different
handshake reflectors, data with marking, and different sysctl values.
The packetdrill used is commit cbe405666c9c8698ac1e72f5e8ffc551216dfa56
of repo: https://github.com/minuscat/packetdrill/tree/upstream_accecn.
And corresponding patches are sent to google/packetdrill email list.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-16-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, GRO does not flush packets when the CWR bit is set.
A corresponding self-test is being added, in which the CWR flag
is set for two consecutive packets, but the first packet with the
CWR flag set will not be flushed immediately.
+===================+==========+===============+===========+
| Packet id | CWR flag | Payload | Flushing? |
+===================+==========+===============+===========+
| 0 | 0 | PAYLOAD_LEN | 0 |
| ... | 0 | PAYLOAD_LEN | 1 |
+-------------------+----------+---------------+-----------+
| NUM_PACKETS/2 - 1 | 1 | payload_len | 0 |
| NUM_PACKETS/2 | 1 | payload_len | 1 |
+-------------------+----------+---------------+-----------+
| ... | 0 | PAYLOAD_LEN | 0 |
| NUM_PACKETS | 0 | PAYLOAD_LEN | 1 |
+===================+==========+===============+===========+
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "splice" alternate mode for mptcp_connect.sh/.c is available now,
this patch adds mptcp_connect_splice.sh to test it in the MPTCP CI by
default.
Note that this mode is also supported by stable kernel versions, but
optimised in this patch series.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-6-31332ba70d7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new 'splice' io mode for mptcp_connect to test
the newly added read_sock() and splice_read() functions of MPTCP.
do_splice() efficiently transfers data directly between two file
descriptors (infd and outfd) without copying to userspace, using
Linux's splice() system call.
Usage:
./mptcp_connect.sh -m splice
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260130-net-next-mptcp-splice-v2-5-31332ba70d7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the default (non-JSON) output more compact. Looking at RSS
context dumps is pretty much impossible without this, because
default print shows the indirection table with line per entry:
'indir': [0,
1,
2,
...
And indirection tables have 100-200 entries each.
The compact output is far more readable:
'indir': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260131203029.1173492-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test which checks that the RSS table is at least 4x the max
queue count supported by the device. The original RSS spec from
Microsoft stated that the RSS indirection table should be 2 to 8
times the CPU count, presumably assuming queue per CPU. If the
CPU count is not a power of two, however, a power-of-2 table
2x larger than queue count results in a 33% traffic imbalance.
Validate that the indirection table is at least 4x the queue
count. This lowers the imbalance to 16% which empirically
appears to be more acceptable to memcache-like workloads.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260131225454.1225151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
- Fix a build error on ia32-x86_64 cross builds
- Replace locally open coded ALIGN_UP(), ALIGN_UP_POW2()
and MAX(), which, beyond being duplicates, the
ALIGN_UP_POW2() is also buggy
- Fix objtool klp-diff regression caused by a recent
change to the bug table format
- Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL build
failure
* tag 'objtool-urgent-2026-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
livepatch/klp-build: Fix klp-build vs CONFIG_MODULE_SRCVERSION_ALL
objtool/klp: Fix bug table handling for __WARN_printf()
objtool: Replace custom macros in elf.c with shared ones
objtool: Print bfd_vma as unsigned long long on ia32-x86_64 cross build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder
- Fix off-by-one line number in 'rustdoc' KUnit tests
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'
- Clean objtool warning by adding one more 'noreturn' function
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'
'kernel' crate:
- Fix build error when using expressions in formatting arguments
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly
- Always inline functions using 'build_assert' with arguments
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host
'macros' crate:
- Fix 'rusttest' build error by ignoring example
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'
Plus clean a few typos in docs and comments"
* tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (28 commits)
rust: num: bounded: clean __new documentation and comments
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
drm/tyr: depend on `COMMON_CLK` to fix build error
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
kbuild: rust: clean libpin_init_internal in mrproper
rust: proc-macro2: rebuild if the version text changes
rust: num: bounded: add missing comment for always inlined function
rust: sync: refcount: always inline functions using build_assert with arguments
rust: bits: always inline functions using build_assert with arguments
scripts: generate_rust_analyzer: compile sysroot with correct edition
scripts: generate_rust_analyzer: compile quote with correct edition
scripts: generate_rust_analyzer: quote: treat `core` and `std` as dependencies
scripts: generate_rust_analyzer: syn: treat `std` as a dependency
scripts: generate_rust_analyzer: remove sysroot assertion
rust: kbuild: give `--config-path` to `rustfmt` in `.rsi` target
scripts: generate_rust_analyzer: Add pin_init_internal deps
scripts: generate_rust_analyzer: Add pin_init -> compiler_builtins dep
scripts: generate_rust_analyzer: Add compiler_builtins -> core dep
rust: macros: ignore example with module parameters
rust: num: bounded: mark __new as unsafe
...
|
|
The test_rss_flow_label_6only test case fails on devices that do not
support IPv6 flow label hashing. Make it skip neatly, consistent with
the behavior of the test_rss_flow_label case.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260128090217.663366-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, CAN and wireless.
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth:
- sfc: fix deadlock in RSS config read
- ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth:
- bonding: fix use-after-free due to enslave fail
- mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect"
* tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: fix segmentation of forwarding fraglist GRO
wifi: mac80211: correctly decode TTLM with default link map
selftests: mptcp: join: fix local endp not being tracked
selftests: mptcp: check subflow errors in close events
mptcp: only reset subflow errors when propagated
selftests: mptcp: check no dup close events after error
mptcp: avoid dup SUB_CLOSED events after disconnect
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
net/mlx5: Fix vhca_id access call trace use before alloc
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
net: phy: micrel: fix clk warning when removing the driver
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
net: bridge: fix static key check
nfc: nci: Fix race between rfkill and nci_unregister_device().
gve: fix probe failure if clock read fails
net/mlx5e: Account for netdev stats in ndo_get_stats64
net/mlx5e: TC, delete flows only for existing peers
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
...
|
|
Similar to IPIP, introduce specific selftest for IP6IP6 flowtable SW
acceleration in nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
/proc/sys/net/core/netdev_rss_key got bigger (256 bytes instead of 52)
Fixes: 37b0ea8fef56 ("net: expand NETDEV_RSS_KEY_LEN to 256 bytes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260127174806.886561-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bug in assoc_sk_only_mismatch() and
assoc_sk_only_mismatch_tx() that creates a race condition which
triggers test flakes in later test cases e.g. data_send_bad_key().
The problem is that the client uses the "conn clr" rpc to setup a data
connection with psp_responder, but never uses a matching "data close"
rpc. This creates a race condition where if the client can queue
another data sock request, like in data_send_bad_key(), before the
server can accept the old connection from the backlog we end up in a
situation where we have two connections in the backlog: one for the
closed connection we have received a FIN for, and one for the new PSP
connection which is expecting to do key exchange.
From there the server pops the closed connection from the backlog, but
the data_send_bad_key() test case in psp.py hangs waiting to perform
key exchange.
The fix is to properly use _conn_close, which fill force the server to
remove the closed connection from the backlog before sending the RPC
ack to the client.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260127-psp-flaky-test-v1-1-13403e390af3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PTP hardware clock (PHC) devices may return -EOPNOTSUPP for
operations like settime, adjtime, or adjfreq. This commonly occurs
with timestamp-only PHC implementations that don't support full clock
control.
For background, syzbot previously exposed a crash risk when PTP clock
drivers lacked required callbacks[1]. Subsequent work[2] made callback
presence a registration requirement. As a result, some drivers (like
iwlwifi MVM/MLD[3]) now provide stub callbacks that return -EOPNOTSUPP
for unsupported operations.
When phc_ctl encounters such devices, the "Operation not supported"
error should be treated as a skip (device limitation) rather than a
test failure. This patch:
- Adds [SKIP] output handling in log_test()
- Detects "Operation not supported" from phc_ctl and returns ksft_skip
- Returns ksft_skip if all tests are skipped, preventing false-positive
results when testing timestamp-only PHC implementations
Link: https://lore.kernel.org/netdev/20251028043216.1971292-1-junjie.cao@intel.com/ [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=dfb073d32cac [2]
Link: https://lore.kernel.org/netdev/20251204123204.9316-1-ziyao@disroot.org/ [3]
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-2-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kselftest framework defines KSFT_SKIP=4 as the standard exit code
for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and
'exit 1' to indicate skip conditions, which can confuse test harnesses
and CI systems.
This patch introduces ksft_skip=4 variable and unifies all skip exit
paths to use 'exit $ksft_skip', consistent with other selftests like
net/lib.sh and net/fib_nexthops.sh.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-1-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Running objtool klp-diff on a changed function which uses WARN() can
fail with:
vmlinux.o: error: objtool: md_run+0x866: failed to convert reloc sym '__bug_table' to its proper format
The problem is that since commit 5b472b6e5bd9 ("x86_64/bug: Implement
__WARN_printf()"), each __WARN_printf() call site now directly
references its bug table entry. klp-diff errors out when it can't
convert such section-based references to object symbols (because bug
table entries don't have symbols).
Luckily, klp-diff already has code to create symbols for bug table
entries. Move that code earlier, before function diffing.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Fixes: 5b472b6e5bd9 ("x86_64/bug: Implement __WARN_printf()")
Reported-by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/a8e0a714b9da962858842b9aecd63b4900927c88.1769406850.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The source file tools/objtool/elf.c defines the macros ALIGN_UP(),
ALIGN_UP_POW2() and MAX(). These macros unnecessarily duplicate
functionality already available under tools/include/, specifically ALIGN(),
roundup_pow_of_two() and max().
More importantly, the definition of ALIGN_UP_POW2() is incorrect when the
input is 1, as it results in a call to __builtin_clz(0), which produces an
undefined result. This issue impacts the function elf_alloc_reloc(). When
adding the first relocation to a section, the function allocates an
undefined number of relocations.
Replace the custom macros with the shared functionality to resolve these
issues.
Fixes: 2c05ca026218 ("objtool: Add elf_create_reloc() and elf_init_reloc()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://patch.msgid.link/20260126151356.3924887-1-petr.pavlu@suse.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
When objtool is cross-compiled in ia32 container for x86_64 target it
fails with the following errors:
> disas.c: In function 'disas_print_addr_sym':
> disas.c:173:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'bfd_vma' {aka 'long long unsigned int'} [-Werror=format=]
> 173 | DINFO_FPRINTF(dinfo, "0x%lx <%s>", addr, symstr);
> | ^~~~~~~~~~~~ ~~~~
> | |
> | bfd_vma {aka long long unsigned int}
Provide a correct printf-fmt depending on sizeof(bfd_vma).
Fixes: 5d859dff266f ("objtool: Print symbol during disassembly")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://patch.msgid.link/20260126-objtool-ia32-v1-1-bb6feaf17566@arista.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-12-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-11-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-10-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-9-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-8-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These functions are reused by the VM tests to collect and compare dmesg
warnings and oops counts. The future VM-specific tests use them heavily.
This patches relies on vm_ssh() already supporting namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-7-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-6-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
