summaryrefslogtreecommitdiff
path: root/sound/parisc
AgeCommit message (Collapse)AuthorFilesLines
2024-05-08ALSA: misc: Use *-y instead of *-objs in MakefileTakashi Iwai1-1/+1
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20240507135513.14919-10-tiwai@suse.de
2021-09-02Merge tag 'for-5.15/parisc' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: - Fix a kernel crash when a signal is delivered to bad userspace stack - Fix fall-through warnings in math-emu code - Increase size of gcc stack frame check - Switch coding from 'pci_' to 'dma_' API - Make struct parisc_driver::remove() return void - Some parisc related Makefile changes - Minor cleanups, e.g. change to octal permissions, fix macro collisions, fix PMD_ORDER collision, replace spaces with tabs * tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: math-emu: Fix fall-through warnings parisc: fix crash with signals and alloca parisc: Fix compile failure when building 64-bit kernel natively parisc: ccio-dma.c: Added tab instead of spaces parisc/parport_gsc: switch from 'pci_' to 'dma_' API parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild parisc: switch from 'pci_' to 'dma_' API parisc: Make struct parisc_driver::remove() return void parisc: remove unused arch/parisc/boot/install.sh and its phony target parisc: Rename PMD_ORDER to PMD_TABLE_ORDER parisc: math-emu: Avoid "fmt" macro collision parisc: Increase size of gcc stack frame check parisc: Replace symbolic permissions with octal permissions
2021-08-30parisc: Make struct parisc_driver::remove() return voidUwe Kleine-König1-2/+1
The caller of this function (parisc_driver_remove() in arch/parisc/kernel/drivers.c) ignores the return value, so better don't return any value at all to not wake wrong expectations in driver authors. The only function that could return a non-zero value before was ipmi_parisc_remove() which returns the return value of ipmi_si_remove_by_dev(). Make this function return void, too, as for all other callers the value is ignored, too. Also fold in a small checkpatch fix for: WARNING: Unnecessary space before function pointer arguments + void (*remove) (struct parisc_device *dev); Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-09ALSA: harmony: Drop superfluous address setupTakashi Iwai1-14/+0
Harmony driver never uses CONTINUOUS buffer type any longer, hence the code setting the address is superfluous. Moreover, the recent change in the ALSA core already covered the missing address field; it's already set up. So let's drop the superfluous line, which includes the full hw_params callback. Link: https://lore.kernel.org/r/20210809071250.21846-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09ALSA: parisc: Fix assignment in if conditionTakashi Iwai1-4/+3
PARISC harmony driver code contains an assignment in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-67-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-29Merge tag 'sound-5.6-rc1' of ↵Linus Torvalds1-18/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "As the diffstat shows we've had again a lot of works done for this cycle: the majority of changes are the continued componentization and code refactoring in ASoC, the tree-wide PCM API updates and cleanups and SOF updates while a few ASoC driver updates are seen, too. Here we go, some highlights: Core: - Finally y2038 support landed to ALSA ABI; some ioctls have been extended and lots of tricks were applied - Applying the new managed PCM buffer API to all drivers; the API itself was already merged in 5.5 - The already deprecated dimension support in ALSA control API is dropped completely now - Verification of ALSA control elements to catch API misuses ASoC: - Further code refactorings and moving things to the component level - Lots of updates and improvements on SOF / Intel drivers; now including common HDMI driver and SoundWire support - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015 and RT1308 HD-audio: - Improved ring-buffer communications using waitqueue - Drop the superfluous buffer preallocation on x86 Others: - Many code cleanups, mostly constifications over the whole tree - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix - FireWire: code refactoring for oxfw and dice drivers" * tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits) ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82 ALSA: hda: Add Clevo W65_67SB the power_save blacklist ASoC: soc-core: remove null_snd_soc_ops ASoC: soc-pcm: add soc_rtd_trigger() ASoC: soc-pcm: add soc_rtd_hw_free() ASoC: soc-pcm: add soc_rtd_hw_params() ASoC: soc-pcm: add soc_rtd_prepare() ASoC: soc-pcm: add soc_rtd_shutdown() ASoC: soc-pcm: add soc_rtd_startup() ASoC: rt1015: add rt1015 amplifier driver ASoC: madera: Correct some kernel doc ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug ASoC: madera: Correct DMIC only input hook ups ALSA: cs46xx: fix spelling mistake "to" -> "too" ALSA: hda - Add docking station support for Lenovo Thinkpad T420s ASoC: Add MediaTek MT6660 Speaker Amp Driver ASoC: dt-bindings: rt5645: add suppliers ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double() ASoC: dapm: add snd_soc_dapm_put_enum_double_locked ...
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03ALSA: parisc: Constify snd_kcontrol_new itemsTakashi Iwai1-1/+1
Most of snd_kcontrol_new definitions are read-only and passed as-is. Let's declare them as const for further optimization. There should be no functional changes by this patch. Link: https://lore.kernel.org/r/20200103081714.9560-43-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-03ALSA: parisc: Constify snd_device_ops definitionsTakashi Iwai1-1/+1
Now we may declare const for snd_device_ops definitions, so let's do it for optimization. There should be no functional changes by this patch. Link: https://lore.kernel.org/r/20200103081714.9560-14-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: parisc: Drop superfluous ioctl PCM opsTakashi Iwai1-2/+0
PCM core deals the empty ioctl field now as default(*). Let's kill the redundant lines. (*) commit fc033cbf6fb7 ("ALSA: pcm: Allow NULL ioctl ops") Link: https://lore.kernel.org/r/20191210061145.24641-10-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-11ALSA: parisc: Use managed buffer allocationTakashi Iwai1-14/+4
Clean up the driver with the new managed buffer allocation API. The hw_free callbacks became superfluous and got dropped. Link: https://lore.kernel.org/r/20191209094943.14984-19-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 176Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170025.980374610@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06ALSA: parisc: Drop superfluous PCM preallocation error checksTakashi Iwai1-8/+2
snd_pcm_lib_preallocate_pages() and co always succeed, so the error check is simply redundant. Drop it. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'sound-4.14-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "We have touched quite a lot of files but with fewer changes at this cycle; as you can see, most of changes are trivial fixes, especially constification patches. Among the massive attacks by constification gangs, we had a few core changes (mostly for ASoC core), as well the fixes and the updates by major vendors. Some highlights: ALSA core: - Fix possible races in control API user-TLV codes - Small cleanup of PCM core ASoC: - Continued work for componentization; still half-baked, but we're certainly progressing - Use of devres for jack detection GPIOs, rather as a cleanup - Jack detection support for Qualcomm MSM8916 - Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson WM8523" * tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (512 commits) ALSA: hda/ca0132 - Fix memory leak at error path ALSA: hda: Fix forget to free resource in error handling code path in hda_codec_driver_probe ASoC: cs43130: Fix unused compiler warnings for PM runtime ASoC: cs43130: Fix possible Oops with invalid dev_id ASoC: cs43130: fix spelling mistake: "irq_occurrance" -> "irq_occurrence" ALSA: atmel: Remove leftovers of AVR32 removal ALSA: atmel: convert AC97c driver to GPIO descriptor API ALSA: hda/realtek - Enable jack detection function for Intel ALC700 ALSA: hda: Fix regression of hdmi eld control created based on invalid pcm ASoC: Intel: Skylake: Add IPC to configure the copier secondary pins ASoC: add missing compile rule for max98371 ASoC: add missing compile rule for sirf-audio-codec ASoC: add missing compile rule for max98371 ASoC: cs43130: Add devicetree bindings for CS43130 ASoC: cs43130: Add support for CS43130 codec ASoC: make clock direction configurable in asoc-simple ALSA: ctxfi: Remove null check before kfree ASoC: max98927: Changed device property read function ASoC: max98927: Modified DAPM widget and map to enable/disable VI sense path ASoC: max98927: Added PM suspend and resume function ...
2017-08-22parisc/harmony: Fix section mismatchesHelge Deller1-5/+5
Signed-off-by: Helge Deller <deller@gmx.de>
2017-08-19ALSA: parisc: constify snd_pcm_ops structuresArvind Yadav1-2/+2
snd_pcm_ops are not supposed to change at runtime. All functions working with snd_pcm_ops provided by <sound/pcm.h> work with const snd_pcm_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-17ALSA: parisc: make snd_pcm_hardware constBhumika Goyal1-2/+2
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: parisc: Constify hw_constraintsTakashi Iwai1-3/+3
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the const pointers. Constify the corresponding static objects for better hardening. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai1-1/+1
Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-04ALSA: Deletion of checks before the function call "iounmap"Markus Elfring1-3/+1
The iounmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-21ALSA: parisc: Use snd_ctl_enum_info()Takashi Iwai1-9/+3
... and reduce the open codes. Also add missing const to the text array. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: parisc: Convert to snd_card_new() with a device pointerTakashi Iwai1-3/+1
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29ALSA: Remove the rest of *_set_drvdata(NULL) callsTakashi Iwai1-3/+0
A few calls are still left in parport drivers after this commit, which I'm not quite sure yet. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07ALSA: parisc/harmony: remove __dev* attributesBill Pemberton1-6/+6
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: linux-parisc@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30ALSA: sound/parisc: Move dereference after NULL testJulia Lawall1-1/+5
If the NULL test on h is needed in snd_harmony_mixer_init, then the dereference should be after the NULL test. Actually, there is a sequence of calls: snd_harmony_create, then snd_harmony_pcm_init, and then snd_harmony_mixer_init. snd_harmony_create initializes h, but may indeed leave it as NULL. There was no NULL test at the beginning of snd_harmony_pcm_init, so I have added one. The NULL test in snd_harmony_mixer_init is then not necessary, but in case the ordering of the calls changes, I have left it, and moved the dereference after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-10Merge branch 'topic/section-fix' into for-linusTakashi Iwai1-1/+1
* topic/section-fix: ALSA: Add missing __devexit_p() markers ALSA: powermac - Replace the rest of __init* ALSA: sound/ppc: update annotations of serveral functions
2009-06-04ALSA: Add missing __devexit_p() markersJean Delvare1-1/+1
3 ISA sound drivers lack their __devexit_p() markers, which would cause build failures when the kernel is built without hotplug support. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-15ALSA: parisc/harmony: fix printk format warningAlexander Beregalov1-1/+1
Fix this warning: sound/parisc/harmony.c:938: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in other sound/*Takashi Iwai1-3/+3
Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-04ALSA: harmony - fix a typoTakashi Iwai1-1/+1
Fix a typo in the patch to remove snd_assert(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in other placesTakashi Iwai1-1/+2
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-27sound: Convert to menuconfigTakashi Iwai1-4/+9
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai1-1/+0
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-02-17[PARISC] fix section mismatch warnings in harmony sound driverHelge Deller1-2/+2
fix for two warnings: - Section mismatch: reference to .init.text:snd_harmony_mixer_init from .text.snd_harmony_probe after 'snd_harmony_probe' - Section mismatch: reference to .init.text:snd_harmony_mixer_reset from .text.snd_harmony_mixer_init after 'snd_harmony_mixer_init' Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-1/+1
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-01-03[ALSA] Remove xxx_t typedefs: PARISC HarmonyTakashi Iwai2-92/+91
Modules: PARISC Harmony driver Remove xxx_t typedefs from the PARIC Harmony driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] harmony - Code clean upTakashi Iwai1-67/+36
Modules: PARISC Harmony driver Clean up snd-harmony driver code: - Give standard module options - Fix spinlocks - Fix the error path of request_irq() - Clean up redundant codes Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-10-22[PARISC] Update harmony from parisc treeStuart Brady2-22/+105
o Added a control for the input source (which can be either "line" or "mic") o Mute the speaker/line-out/headphone outputs by default. o Increased the buffer size from 10 pages to 16. Signed-off-by: Stuart Brady <sdb@parisc-linux.org> ALSA Harmony was resetting the capture position when preparing the capture substream, which it shouldn't do. This should fix the problem. Signed-off-by: Stuart Brady <sdb@parisc-linux.org> ALSA Harmony should no longer play junk (left in the buffers from a previous stream) at the start of a new stream. Implement the monitor mixer channel for ALSA Harmony. Also prevent snd_harmony_volume_get from returning negative values. Signed-off-by: Stuart Brady <sdb@parisc-linux.org> Use the graveyard/silence buffers in ALSA Harmony. Signed-off-by: Stuart Brady <sdb@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-22[PARISC] Convert parisc_device to use struct resource for hpaMatthew Wilcox1-3/+3
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-09-12[ALSA] Add snd_card_set_dev()Takashi Iwai1-0/+2
ARM AACI PL041 driver,PARISC Harmony driver Added snd_card_set_dev() calls to register the device pointer for the card. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds4-0/+1167
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 02:03:53 +0300