Age | Commit message (Collapse) | Author | Files | Lines |
|
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
in case no efi.get_variable exsits
A a potential race condition reported by one of my customers that leads to
a NULL pointer dereference, where the call to efi.get_variable should be
guarded with efi_rt_services_supported() to ensure that function exists.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A bug reported by one of my customers that the order of TAS2781
calibrated-data is incorrect, the correct way is to move R0_Low
and insert it between R0 and InvR0.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250907222728.988-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The tasdev_load_calibrated_data() function expects the calibration data
values in the cali_data buffer as R0, R0Low, InvR0, Power, TLim which
is not the same as what tas2563_save_calibration() writes to the buffer.
Reorder the EFI variables in the tas2563_save_calibration() function
to put the values in the buffer in the correct order.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-2-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Before conversion to unify the calibration data management, the
tas2563_apply_calib() function performed the big endian conversion and
wrote the calibration data to the device. The writing is now done by the
common tasdev_load_calibrated_data() function, but without conversion.
Put the values into the calibration data buffer with the expected
endianness.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-1-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A bug reported by one of my customers that EFI name beginning with 0
instead of 1.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250827043404.644-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
During the conversion to unify the calibration data management, the
reference to tasdevice_priv was wrongly set to h->hda_priv instead of
h->priv. This resulted in memory corruption and crashes eventually.
Unfortunately it's a void pointer, hence the compiler couldn't know
that it's wrong.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1248270
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250820051902.4523-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will
cause confusion for customers on which devices they support.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250816042741.1659-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100842.12224-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some devices save the calibrated data into L"CALI_DATA", and others into
L"SmartAmpCalibrationData". Driver code will support both.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250805070945.524-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The wrong register was used for digital volume control of TAS2770,
The definition was changed, and usage was also updated.
Fixes: ab29b3460c5c ("ALSA: hda: Add TAS2770 support")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250729145849.55057-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add TAS2770 support in TI's HDA driver. And add hda_chip_id for
more products. Distinguish DSP and non-DSP in firmware
loading function.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250723142423.38768-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now move the all remaining codec drivers from sound/pci/hda to
sound/hda/codecs subdirectory. Some drivers are put under the further
vendor subdirectory, and the vendor helper code (*_helper.c) are put
under helpers subdirectory. Also the sub-codec drivers are moved under
a different subdirectory, sound/hda/codecs/sub-codecs, for
distinguishing from the main HD-audio codec drivers.
The prefix patch_ and hda_ as well as the suffix _helper are dropped
from file names as they are mostly superfluous.
No functional changes but just file path shuffling.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-7-tiwai@suse.de
|