summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2023-03-31net/sched: act_tunnel_key: add support for "don't fragment"Davide Caratti1-0/+5
extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT. Suggested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31net: dsa: fix db type confusion in host fdb/mdb add/delVladimir Oltean1-12/+12
We have the following code paths: Host FDB (unicast RX filtering): dsa_port_standalone_host_fdb_add() dsa_port_bridge_host_fdb_add() | | +--------------+ +------------+ | | v v dsa_port_host_fdb_add() dsa_port_standalone_host_fdb_del() dsa_port_bridge_host_fdb_del() | | +--------------+ +------------+ | | v v dsa_port_host_fdb_del() Host MDB (multicast RX filtering): dsa_port_standalone_host_mdb_add() dsa_port_bridge_host_mdb_add() | | +--------------+ +------------+ | | v v dsa_port_host_mdb_add() dsa_port_standalone_host_mdb_del() dsa_port_bridge_host_mdb_del() | | +--------------+ +------------+ | | v v dsa_port_host_mdb_del() The logic added by commit 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") zeroes out db.bridge.num if the switch doesn't support ds->fdb_isolation (the majority doesn't). This is done for a reason explained in commit c26933639b54 ("net: dsa: request drivers to perform FDB isolation"). Taking a single code path as example - dsa_port_host_fdb_add() - the others are similar - the problem is that this function handles: - DSA_DB_PORT databases, when called from dsa_port_standalone_host_fdb_add() - DSA_DB_BRIDGE databases, when called from dsa_port_bridge_host_fdb_add() So, if dsa_port_host_fdb_add() were to make any change on the "bridge.num" attribute of the database, this would only be correct for a DSA_DB_BRIDGE, and a type confusion for a DSA_DB_PORT bridge. However, this bug is without consequences, for 2 reasons: - dsa_port_standalone_host_fdb_add() is only called from code which is (in)directly guarded by dsa_switch_supports_uc_filtering(ds), and that function only returns true if ds->fdb_isolation is set. So, the code only executed for DSA_DB_BRIDGE databases. - Even if the code was not dead for DSA_DB_PORT, we have the following memory layout: struct dsa_bridge { struct net_device *dev; unsigned int num; bool tx_fwd_offload; refcount_t refcount; }; struct dsa_db { enum dsa_db_type type; union { const struct dsa_port *dp; // DSA_DB_PORT struct dsa_lag lag; struct dsa_bridge bridge; // DSA_DB_BRIDGE }; }; So, the zeroization of dsa_db :: bridge :: num on a dsa_db structure of type DSA_DB_PORT would access memory which is unused, because we only use dsa_db :: dp for DSA_DB_PORT, and this is mapped at the same address with dsa_db :: dev for DSA_DB_BRIDGE, thanks to the union definition. It is correct to fix up dsa_db :: bridge :: num only from code paths that come from the bridge / switchdev, so move these there. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329133819.697642-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-29/+148
Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") 924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31Merge tag 'net-6.3-rc5' of ↵Linus Torvalds6-24/+143
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from CAN and WPAN. Still quite a few bugs from this release. This pull is a bit smaller because major subtrees went into the previous one. Or maybe people took spring break off? Current release - regressions: - phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement Current release - new code bugs: - eth: wangxun: fix vector length of interrupt cause - vsock/loopback: consistently protect the packet queue with sk_buff_head.lock - virtio/vsock: fix header length on skb merging - wpan: ca8210: fix unsigned mac_len comparison with zero Previous releases - regressions: - eth: stmmac: don't reject VLANs when IFF_PROMISC is set - eth: smsc911x: avoid PHY being resumed when interface is not up - eth: mtk_eth_soc: fix tx throughput regression with direct 1G links - eth: bnx2x: use the right build_skb() helper after core rework - wwan: iosm: fix 7560 modem crash on use on unsupported channel Previous releases - always broken: - eth: sfc: don't overwrite offload features at NIC reset - eth: r8169: fix RTL8168H and RTL8107E rx crc error - can: j1939: prevent deadlock by moving j1939_sk_errqueue() - virt: vmxnet3: use GRO callback when UPT is enabled - virt: xen: don't do grant copy across page boundary - phy: dp83869: fix default value for tx-/rx-internal-delay - dsa: ksz8: fix multiple issues with ksz8_fdb_dump - eth: mvpp2: fix classification/RSS of VLAN and fragmented packets - eth: mtk_eth_soc: fix flow block refcounting logic Misc: - constify fwnode pointers in SFP handling" * tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload net: ethernet: mtk_eth_soc: fix flow block refcounting logic net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit() net: dsa: sync unicast and multicast addresses for VLAN filters too net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only xen/netback: use same error messages for same errors test/vsock: new skbuff appending test virtio/vsock: WARN_ONCE() for invalid state of socket virtio/vsock: fix header length on skb merging bnxt_en: Add missing 200G link speed reporting bnxt_en: Fix typo in PCI id to device description string mapping bnxt_en: Fix reporting of test result in ethtool selftest i40e: fix registers dump after run ethtool adapter self test bnx2x: use the right build_skb() helper net: ipa: compute DMA pool size properly net: wwan: iosm: fixes 7560 modem crash net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg() ice: add profile conflict check for AVF FDIR ...
2023-03-30net: dsa: sync unicast and multicast addresses for VLAN filters tooVladimir Oltean1-5/+116
If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30net: optimize ____napi_schedule() to avoid extra NET_RX_SOFTIRQEric Dumazet1-4/+18
____napi_schedule() adds a napi into current cpu softnet_data poll_list, then raises NET_RX_SOFTIRQ to make sure net_rx_action() will process it. Idea of this patch is to not raise NET_RX_SOFTIRQ when being called indirectly from net_rx_action(), because we can process poll_list from this point, without going to full softirq loop. This needs a change in net_rx_action() to make sure we restart its main loop if sd->poll_list was updated without NET_RX_SOFTIRQ being raised. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Xing <kernelxing@tencent.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Tested-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30net: optimize napi_schedule_rps()Eric Dumazet1-3/+5
Based on initial patch from Jason Xing. Idea is to not raise NET_RX_SOFTIRQ from napi_schedule_rps() when we queued a packet into another cpu backlog. We can do this only in the context of us being called indirectly from net_rx_action(), to have the guarantee our rps_ipi_list will be processed before we exit from net_rx_action(). Link: https://lore.kernel.org/lkml/20230325152417.5403-1-kerneljasonxing@gmail.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Xing <kernelxing@tencent.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Tested-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30net: add softnet_data.in_net_rx_actionEric Dumazet1-0/+4
We want to make two optimizations in napi_schedule_rps() and ____napi_schedule() which require to know if these helpers are called from net_rx_action(), instead of being called from other contexts. sd.in_net_rx_action is only read/written by the owning cpu. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Tested-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30net: napi_schedule_rps() cleanupEric Dumazet1-6/+12
napi_schedule_rps() return value is ignored, remove it. Change the comment to clarify the intent. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Tested-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30virtio/vsock: WARN_ONCE() for invalid state of socketArseniy Krasnov1-0/+7
This adds WARN_ONCE() and return from stream dequeue callback when socket's queue is empty, but 'rx_bytes' still non-zero. This allows the detection of potential bugs due to packet merging (see previous patch). Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30virtio/vsock: fix header length on skb mergingArseniy Krasnov1-1/+1
This fixes appending newly arrived skbuff to the last skbuff of the socket's queue. Problem fires when we are trying to append data to skbuff which was already processed in dequeue callback at least once. Dequeue callback calls function 'skb_pull()' which changes 'skb->len'. In current implementation 'skb->len' is used to update length in header of the last skbuff after new data was copied to it. This is bug, because value in header is used to calculate 'rx_bytes'/'fwd_cnt' and thus must be not be changed during skbuff's lifetime. Bug starts to fire since: commit 077706165717 ("virtio/vsock: don't use skbuff state to account credit") It presents before, but didn't triggered due to a little bit buggy implementation of credit calculation logic. So use Fixes tag for it. Fixes: 077706165717 ("virtio/vsock: don't use skbuff state to account credit") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30Merge tag 'ieee802154-for-net-2023-03-29' of ↵Jakub Kicinski1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-29 Two small fixes this time. Dongliang Mu removed an unnecessary null pointer check. Harshit Mogalapalli fixed an int comparison unsigned against signed from a recent other fix in the ca8210 driver. * tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: net: ieee802154: remove an unnecessary null pointer check ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx() ==================== Link: https://lore.kernel.org/r/20230329064541.2147400-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29mptcp: do not fill info not used by the PM in usedMatthieu Baerts1-7/+13
Only the in-kernel PM uses the number of address and subflow limits allowed per connection. It then makes more sense not to display such info when other PMs are used not to confuse the userspace by showing limits not being used. While at it, we can get rid of the "val" variable and add indentations instead. It would have been good to have done this modification directly in commit 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") but as we change a bit the behaviour, it is fine not to backport it to stable. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29mptcp: simplify subflow_syn_recv_sock()Paolo Abeni1-28/+13
Postpone the msk cloning to the child process creation so that we can avoid a bunch of conditionals. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/61 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29mptcp: avoid unneeded address copyPaolo Abeni1-2/+0
In the syn_recv fallback path, the msk is unused. We can skip setting the socket address. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-296lowpan: Remove redundant initialisation.Kuniyuki Iwashima1-1/+1
We'll call memset(&tmp, 0, sizeof(tmp)) later. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29ipv6: Remove in6addr_any alternatives.Kuniyuki Iwashima2-12/+9
Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29vsock: support sockmapBobby Eshleman6-6/+262
This patch adds sockmap support for vsock sockets. It is intended to be usable by all transports, but only the virtio and loopback transports are implemented. SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported. Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-29net: dst: Switch to rcuref_t reference countingThomas Gleixner5-28/+12
Under high contention dst_entry::__refcnt becomes a significant bottleneck. atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into high retry rates on contention. Switch the reference count to rcuref_t which results in a significant performance gain. Rename the reference count member to __rcuref to reflect the change. The gain depends on the micro-architecture and the number of concurrent operations and has been measured in the range of +25% to +130% with a localhost memtier/memcached benchmark which amplifies the problem massively. Running the memtier/memcached benchmark over a real (1Gb) network connection the conversion on top of the false sharing fix for struct dst_entry::__refcnt results in a total gain in the 2%-5% range over the upstream baseline. Reported-by: Wangyang Guo <wangyang.guo@intel.com> Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29net: dst: Prevent false sharing vs. dst_entry:: __refcntWangyang Guo4-27/+27
dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by: Wangyang Guo <wangyang.guo@intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28virtio/vsock: check argument to avoid no effect callArseniy Krasnov1-0/+6
Both of these functions have no effect when input argument is 0, so to avoid useless spinlock access, check argument before it. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28virtio/vsock: allocate multiple skbuffs on txArseniy Krasnov1-14/+43
This adds small optimization for tx path: instead of allocating single skbuff on every call to transport, allocate multiple skbuff's until credit space allows, thus trying to send as much as possible data without return to af_vsock.c. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28ethtool: Add support for configuring tx_push_buf_lenShay Agroskin2-3/+33
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28net: introduce a config option to tweak MAX_SKB_FRAGSEric Dumazet2-2/+14
Currently, MAX_SKB_FRAGS value is 17. For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg() attempts order-3 allocations, stuffing 32768 bytes per frag. But with zero copy, we use order-0 pages. For BIG TCP to show its full potential, we add a config option to be able to fit up to 45 segments per skb. This is also needed for BIG TCP rx zerocopy, as zerocopy currently does not support skbs with frag list. We have used MAX_SKB_FRAGS=45 value for years at Google before we deployed 4K MTU, with no adverse effect, other than a recent issue in mlx4, fixed in commit 26782aad00cc ("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS") Back then, goal was to be able to receive full size (64KB) GRO packets without the frag_list overhead. Note that /proc/sys/net/core/max_skb_frags can also be used to limit the number of fragments TCP can use in tx packets. By default we keep the old/legacy value of 17 until we get more coverage for the updated values. Sizes of struct skb_shared_info on 64bit arches MAX_SKB_FRAGS | sizeof(struct skb_shared_info): ============================================== 17 320 21 320+64 = 384 25 320+128 = 448 29 320+192 = 512 33 320+256 = 576 37 320+320 = 640 41 320+384 = 704 45 320+448 = 768 This inflation might cause problems for drivers assuming they could pack both the incoming packet (for MTU=1500) and skb_shared_info in half a page, using build_skb(). v3: fix build error when CONFIG_NET=n v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long" Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov1-6/+10
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel1-2/+6
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27dev_ioctl: fix a W=1 warningHeiner Kallweit1-0/+1
This fixes the following warning when compiled with GCC 12.2.0 and W=1. net/core/dev_ioctl.c:475: warning: Function parameter or member 'data' not described in 'dev_ioctl' Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27vsock/loopback: use only sk_buff_head.lock to protect the packet queueStefano Garzarella1-8/+2
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25Merge tag 'nfsd-6.3-4' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix a crash when using NFS with krb5p * tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix a crash in gss_krb5_checksum()
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski16-99/+206
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24fix typos in net/sched/* filesTaichi Nishimura3-3/+3
This patch fixes typos in net/sched/* files. Signed-off-by: Taichi Nishimura <awkrail01@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24ipv6: prevent router_solicitations for team portXin Long1-1/+2
The issue fixed for bonding in commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") also exists in team driver. However, we can't just disable ipv6 addrconf for team ports, as 'teamd' will need it when nsns_ping watch is used in the user space. Instead of preventing ipv6 addrconf, this patch only prevents RS packets for team ports, as it did in commit b52e1cce31ca ("ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL"). Note that we do not prevent DAD packets, to avoid the changes getting intricate / hacky. Also, usually sysctl dad_transmits is set to 1 and only 1 DAD packet will be sent, and by now no libteam user complains about DAD packets on team ports, unlike RS packets. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24Merge branch 'main' of ↵Jakub Kicinski13-286/+225
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter updates for net-next This pull request contains changes for the *net-next* tree. 1. Change IPv6 stack to keep conntrack references until ipsec policy checks are done, like ipv4, from Madhu Koriginja. This update was missed when IPv6 NAT support was added 10 years ago. 2. get rid of old 'compat' structure layout in nf_nat_redirect core and move the conversion to the only user that needs the old layout for abi reasons. From Jeremy Sowden. 3. Compact some common code paths in nft_redir, also from Jeremy. 4. Time to remove the 'default y' knob so iptables 32bit compat interface isn't compiled in by default anymore, from myself. 5. Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used. Also from myself. * 'main' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: keep conntrack reference until IPsecv6 policy checks are done xtables: move icmp/icmpv6 logic to xt_tcpudp netfilter: xtables: disable 32bit compat interface by default netfilter: nft_masq: deduplicate eval call-backs netfilter: nft_redir: use `struct nf_nat_range2` throughout and deduplicate eval call-backs ==================== Link: https://lore.kernel.org/r/20230322210802.6743-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24Merge tag 'for-netdev' of ↵Jakub Kicinski2-8/+15
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-23 We've added 8 non-merge commits during the last 13 day(s) which contain a total of 21 files changed, 238 insertions(+), 161 deletions(-). The main changes are: 1) Fix verification issues in some BPF programs due to their stack usage patterns, from Eduard Zingerman. 2) Fix to add missing overflow checks in xdp_umem_reg and return an error in such case, from Kal Conley. 3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia. 4) Fix insufficient bpf_jit_limit default to avoid users running into hard to debug seccomp BPF errors, from Daniel Borkmann. 5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc to make it unambiguous from other errors, from Jesper Dangaard Brouer. 6) Two BPF selftest fixes to address compilation errors from recent changes in kernel structures, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support bpf: Adjust insufficient default bpf_jit_limit xsk: Add missing overflow check in xdp_umem_reg selftests/bpf: Fix progs/test_deny_namespace.c issues. selftests/bpf: Fix progs/find_vma_fail1.c build error. libbpf: Revert poisoning of strlcpy selftests/bpf: Tests for uninitialized stack reads bpf: Allow reads from uninit stack ==================== Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24Merge tag 'for-net-2023-03-23' of ↵Jakub Kicinski5-71/+155
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix MGMT add advmon with RSSI command - L2CAP: Fix responding with wrong PDU type - Fix race condition in hci_cmd_sync_clear - ISO: Fix timestamped HCI ISO data packet parsing - HCI: Fix global-out-of-bounds - hci_sync: Resume adv with no RPA when active scan * tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet Bluetooth: hci_sync: Resume adv with no RPA when active scan ==================== Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24Merge tag 'wireless-2023-03-23' of ↵Jakub Kicinski5-13/+23
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 Third set of fixes for v6.3. mt76 has two kernel crash fixes and adding back 160 MHz channel support for mt7915. mac80211 has fixes for a race in transmit path and two mesh related fixes. iwlwifi also has fixes for races. * tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix mesh path discovery based on unicast packets wifi: mac80211: fix qos on mesh interfaces wifi: iwlwifi: mvm: protect TXQ list manipulation wifi: iwlwifi: mvm: fix mvmtxq->stopped handling wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue() wifi: mwifiex: mark OF related data as maybe unused wifi: mt76: connac: do not check WED status for non-mmio devices wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 wifi: mt76: do not run mt76_unregister_device() on unregistered hw ==================== Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Bluetooth: HCI: Fix global-out-of-boundsSungwoo Kim1-0/+2
To loop a variable-length array, hci_init_stage_sync(stage) considers that stage[i] is valid as long as stage[i-1].func is valid. Thus, the last element of stage[].func should be intentionally invalid as hci_init0[], le_init2[], and others did. However, amp_init1[] and amp_init2[] have no invalid element, letting hci_init_stage_sync() keep accessing amp_init1[] over its valid range. This patch fixes this by adding {} in the last of amp_init1[] and amp_init2[]. ================================================================== BUG: KASAN: global-out-of-bounds in hci_dev_open_sync ( /v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032 CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04 Workqueue: hci1 hci_power_on Call Trace: <TASK> dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1)) print_report (/v6.2-bzimage/mm/kasan/report.c:307 /v6.2-bzimage/mm/kasan/report.c:417) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) kasan_report (/v6.2-bzimage/mm/kasan/report.c:184 /v6.2-bzimage/mm/kasan/report.c:519) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) ? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635) ? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190 /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443 /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781 /v6.2-bzimage/kernel/locking/mutex.c:171 /v6.2-bzimage/kernel/locking/mutex.c:285) ? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282) hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485 /v6.2-bzimage/net/bluetooth/hci_core.c:984) ? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969) ? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85) ? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62 /v6.2-bzimage/lib/string.c:161) process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294) worker_thread (/v6.2-bzimage/./include/linux/list.h:292 /v6.2-bzimage/kernel/workqueue.c:2437) ? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379) kthread (/v6.2-bzimage/kernel/kthread.c:376) ? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331) ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314) </TASK> The buggy address belongs to the variable: amp_init1+0x30/0x60 The buggy address belongs to the physical page: page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00 >ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 ^ ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9 ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9 This bug is found by FuzzBT, a modified version of Syzkaller. Other contributors for this bug are Ruoyu Wu and Peng Hui. Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: mgmt: Fix MGMT add advmon with RSSI commandHoward Chung1-1/+2
The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable length argument. This causes host not able to register advmon with rssi. This patch has been locally tested by adding monitor with rssi via btmgmt on a kernel 6.1 machine. Reviewed-by: Archie Pusaka <apusaka@chromium.org> Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: L2CAP: Fix responding with wrong PDU typeLuiz Augusto von Dentz1-38/+79
L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not L2CAP_LE_CONN_RSP: L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x15 Unexpected L2CAP response code (expected 0x18) L2CAP LE EATT Server - Reject - test failed > ACL Data RX: Handle 42 flags 0x02 dlen 26 LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18 PSM: 39 (0x0027) MTU: 64 MPS: 64 Credits: 5 Source CID: 65 Source CID: 66 Source CID: 67 Source CID: 68 Source CID: 69 < ACL Data TX: Handle 42 flags 0x00 dlen 16 LE L2CAP: LE Connection Response (0x15) ident 1 len 8 invalid size 00 00 00 00 00 00 06 00 L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x18 L2CAP LE EATT Server - Reject - test passed Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23net/sched: act_api: use the correct TCA_ACT attributes in dumpPedro Tammela1-4/+4
4 places in the act api code are using 'TCA_' definitions where they should be using 'TCA_ACT_', which is confusing for the reader, although functionally they are equivalent. Cc: Hangbin Liu <haliu@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-23net: ipv4: Allow changing IPv4 address protocolPetr Machata1-0/+3
When IP address protocol field was added in commit 47f0bd503210 ("net: Add new protocol attribute to IP addresses"), the semantics included the ability to change the protocol for IPv6 addresses, but not for IPv4 addresses. It seems this was not deliberate, but rather by accident. A userspace that wants to change the protocol of an address might drop and recreate the address, but that disrupts routing and is just impractical. So in this patch, when an IPv4 address is replaced (through RTM_NEWADDR request with NLM_F_REPLACE flag), update the proto at the address to the one given in the request, or zero if none is given. This matches the behavior of IPv6. Previously, any new value given was simply ignored. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-23net/sched: remove two skb_mac_header() usesEric Dumazet2-2/+2
tcf_mirred_act() and tcf_mpls_act() can use skb_network_offset() instead of relying on skb_mac_header(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23sch_cake: do not use skb_mac_header() in cake_overhead()Eric Dumazet1-3/+3
We want to remove our use of skb_mac_header() in tx paths, eg remove skb_reset_mac_header() from __dev_queue_xmit(). Idea is that ndo_start_xmit() can get the mac header simply looking at skb->data. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23net: do not use skb_mac_header() in qdisc_pkt_len_init()Eric Dumazet1-4/+4
We want to remove our use of skb_mac_header() in tx paths, eg remove skb_reset_mac_header() from __dev_queue_xmit(). Idea is that ndo_start_xmit() can get the mac header simply looking at skb->data. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23net: Catch invalid index in XPS mappingNick Child1-0/+2
When setting the XPS value of a TX queue, warn the user once if the index of the queue is greater than the number of allocated TX queues. Previously, this scenario went uncaught. In the best case, it resulted in unnecessary allocations. In the worst case, it resulted in out-of-bounds memory references through calls to `netdev_get_tx_queue( dev, index)`. Therefore, it is important to inform the user but not worth returning an error and risk downing the netdevice. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Link: https://lore.kernel.org/r/20230321150725.127229-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'ipsec-libreswan-mlx5' of ↵Jakub Kicinski2-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Leon Romanovsky says: ==================== Extend packet offload to fully support libreswan The following patches are an outcome of Raed's work to add packet offload support to libreswan [1]. The series includes: * Priority support to IPsec policies * Statistics per-SA (visible through "ip -s xfrm state ..." command) * Support to IKE policy holes * Fine tuning to acquire logic. [1] https://github.com/libreswan/libreswan/pull/986 Link: https://lore.kernel.org/all/cover.1678714336.git.leon@kernel.org * tag 'ipsec-libreswan-mlx5' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5e: Update IPsec per SA packets/bytes count net/mlx5e: Use one rule to count all IPsec Tx offloaded traffic net/mlx5e: Support IPsec acquire default SA net/mlx5e: Allow policies with reqid 0, to support IKE policy holes xfrm: copy_to_user_state fetch offloaded SA packets/bytes statistics xfrm: add new device offload acquire flag net/mlx5e: Use chains for IPsec policy priority offload net/mlx5: fs_core: Allow ignore_flow_level on TX dest net/mlx5: fs_chains: Refactor to detach chains from tc usage ==================== Link: https://lore.kernel.org/r/20230320094722.1009304-1-leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Bluetooth: Remove "Power-on" check from Mesh featureBrian Gix1-6/+0
The Bluetooth mesh experimental feature enable was requiring the controller to be powered off in order for the Enable to work. Mesh is supposed to be enablable regardless of the controller state, and created an unintended requirement that the mesh daemon be started before the classic bluetoothd daemon. Fixes: af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh") Signed-off-by: Brian Gix <brian.gix@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: Fix race condition in hci_cmd_sync_clearMin Li1-0/+2
There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30 Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution") Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: ISO: fix timestamped HCI ISO data packet parsingPauli Virtanen1-2/+7
Use correct HCI ISO data packet header struct when the packet has timestamp. The timestamp, when present, goes before the other fields (Core v5.3 4E 5.4.5), so the structs are not compatible. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packetLuiz Augusto von Dentz1-4/+19
Because some transports don't have a dedicated type for ISO packets (see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type when in fact they are ISO packets. In the past this was left for the driver to detect such thing but it creates a problem when using the likes of btproxy when used by a VM as the host would not be aware of the connection the guest is doing it won't be able to detect such behavior, so this make bt_recv_frame detect when it happens as it is the common interface to all drivers including guest VMs. Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 20:39:59 +0300