summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-hub.c
AgeCommit message (Expand)AuthorFilesLines
2022-07-21xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman1-1/+1
2021-11-26xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delayMathias Nyman1-1/+2
2021-07-28xhci: Fix lost USB 2 remote wakeMathias Nyman1-1/+2
2020-12-29xhci: Give USB2 ports time to enter U3 in bus suspendLi Jun1-0/+4
2020-09-03xhci: Do warm-reset when both CAS and XDEV_RESUME are setKai-Heng Feng1-9/+10
2020-01-27usb: host: xhci-hub: fix extra endianness conversionRuslan Bilovol1-1/+1
2019-12-21xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman1-0/+8
2019-12-17xhci: make sure interrupts are restored to correct stateMathias Nyman1-4/+4
2018-12-29xhci: Don't prevent USB2 bus suspend in state check intended for USB3 onlyMathias Nyman1-1/+2
2018-12-01usb: xhci: fix uninitialized completion when USB3 port got wrong statusAaron Ma1-1/+1
2018-12-01usb: xhci: Prevent bus suspend if a port connect change or polling state is d...Mathias Nyman1-14/+46
2018-12-01usb: xhci: fix timeout for transition from RExit to U0Aaron Ma1-2/+2
2018-10-18xhci: Don't print a warning when setting link state for disabled portsMathias Nyman1-9/+9
2018-07-22xhci: Fix USB3 NULL pointer dereference at logical disconnect.Mathias Nyman1-1/+1
2018-05-30xhci: workaround for AMD Promontory disabled ports wakeupJoe Lee1-0/+7
2018-03-28usb: xhci: Fix potential memory leak in xhci_disable_slot()Lu Baolu1-1/+1
2018-03-28usb: xhci: Disable slot even when virt-dev is nullLu Baolu1-0/+3
2017-10-17usb: xhci: Handle error condition in xhci_stop_device()Mayank Rana1-5/+18
2017-09-18Revert "xhci: Limit USB2 port wake support for AMD Promontory hosts"Kai-Heng Feng1-3/+0
2017-09-18xhci: set missing SuperSpeedPlus Link Protocol bit in roothub descriptorMathias Nyman1-1/+10
2017-08-28usb: xhci: Support enabling of compliance mode for xhci 1.1Jack Pham1-0/+33
2017-08-17xhci: rework bus_resume and check ports are suspended before resuming them.Mathias Nyman1-43/+51
2017-07-20usb: xhci: fix spinlock recursion for USB2 test modePeter Chen1-0/+2
2017-07-20xhci: fix 20000ms port resume timeoutMathias Nyman1-0/+3
2017-07-20usb: xhci: Issue stop EP command only when the EP state is runningShyam Sundar S K1-1/+8
2017-06-20xhci: Limit USB2 port wake support for AMD Promontory hostsJiahau Chang1-0/+3
2017-05-18xhci: Fix command ring stop regression in 4.11Mathias Nyman1-1/+1
2017-04-18xhci: use correct flags for spin_lock_irqrestore() when setting port powerMathias Nyman1-10/+10
2017-04-08usb: xhci: remove error messages for failed memory allocationLu Baolu1-3/+1
2017-04-08xhci: Rework how we handle unresponsive or hoptlug removed hostsMathias Nyman1-4/+8
2017-04-08usb: xhci: Add port test modes support for usb2.Guoqing Zhang1-0/+85
2017-04-08usb: xhci: Add helper function xhci_set_power_on().Guoqing Zhang1-21/+45
2017-01-25usb: host: xhci: add xhci_virt_device tracerFelipe Balbi1-0/+2
2017-01-25usb: host: xhci: rename completion codes to match specFelipe Balbi1-1/+2
2017-01-25usb: xhci: add quirk flag for broken PED bitsFelipe Balbi1-0/+6
2017-01-25xhci: Put warning message on a single lineAlexander Stein1-2/+1
2016-10-20xhci: use default USB_RESUME_TIMEOUT when resuming ports.Mathias Nyman1-2/+2
2016-10-20xhci: workaround for hosts missing CAS bitMathias Nyman1-0/+37
2016-08-16usb: xhci: Fix panic if disconnectJim Lin1-0/+3
2016-02-04xhci: USB 3.1 add default Speed Attributes to SuperSpeedPlus device capabilityMathias Nyman1-9/+18
2015-12-14Merge 4.4-rc5 into usb-next as we want those fixes here for testingGreg Kroah-Hartman1-5/+42
2015-12-12xhci: fix usb2 resume timing and races.Mathias Nyman1-5/+42
2015-12-01xhci: use the correct define to indicate port status suspend change.Mathias Nyman1-1/+1
2015-11-18xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devicesMathias Nyman1-6/+9
2015-10-04xhci: support new USB 3.1 hub request to get extended port statusMathias Nyman1-0/+29
2015-10-04xhci: check xhci hardware for USB 3.1 supportMathias Nyman1-12/+12
2015-10-04xhci: define the new default speed ID for SuperSpeedPlus used by xhci hwMathias Nyman1-3/+3
2015-10-04xhci: Add a SuperSpeedPlus capability descriptor for xhci USB 3.1 roothubMathias Nyman1-19/+107
2015-07-23xhci: do not report PLC when link is in internal resume stateZhuang Jin Can1-1/+8
2015-07-23xhci: prevent bus_suspend if SS port resuming in phase 1Zhuang Jin Can1-3/+3
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 17:53:25 +0300