summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Expand)AuthorFilesLines
2025-08-28serial: 8250: fix panic due to PSLVERRYunhui Cui1-2/+1
2025-07-24pch_uart: Fix dma_sync_sg_for_device() nents valueThomas Fourier1-1/+1
2025-07-06serial: imx: Restore original RXTL for console to fix data lossFabio Estevam1-5/+12
2025-07-06tty: serial: uartlite: register uart driver in initJakub Lewalski1-13/+12
2025-06-27serial: sh-sci: Increment the runtime usage counter for the earlycon deviceClaudiu Beznea1-0/+16
2025-06-27serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-2/+30
2025-06-27serial: sh-sci: Move runtime PM enable to sci_probe_single()Claudiu Beznea1-18/+6
2025-06-27serial: sh-sci: Check if TX data was written to device in .tx_empty()Claudiu Beznea1-0/+29
2025-06-27serial: Fix potential null-ptr-deref in mlb_usio_probe()Henry Martin1-1/+4
2025-06-04serial: sh-sci: Save and restore more registersGeert Uytterhoeven1-0/+25
2025-06-04serial: sh-sci: Update the suspend/resume supportClaudiu Beznea1-2/+69
2025-06-04serial: mctrl_gpio: split disable_ms into sync and no_sync APIsAlexis Lothoré7-15/+46
2025-05-02serial: sifive: lock port in startup()/shutdown() callbacksRyo Takakura1-0/+6
2025-05-02serial: msm: Configure correct working mode before starting earlyconStephan Gerhold1-0/+6
2025-04-10tty: serial: fsl_lpuart: disable transmitter before changing RS485 related re...Sherry Sun1-0/+17
2025-04-10tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platformSherry Sun1-4/+4
2025-04-07serial: 8250_dma: terminate correct DMA in tx_dma_flush()John Keeping1-1/+1
2025-04-07tty: serial: 8250: Add Brainboxes XC devicesCameron Williams1-0/+30
2025-04-07tty: serial: 8250: Add some more device IDsCameron Williams1-0/+16
2025-02-21serial: 8250_pci: add support for ASIX AX99100Jiaqing Zhao1-0/+10
2025-02-21serial: 8250: Fix fifo underflow on flushJohn Keeping3-0/+27
2025-02-21tty: xilinx_uartps: split sysrq handlingSean Anderson1-6/+4
2025-02-21serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in...Claudiu Beznea1-0/+23
2025-02-21serial: sh-sci: Drop __initdata macro for port_cfgClaudiu Beznea1-1/+1
2025-02-21serial: 8250: Adjust the timeout for FIFO modeJohn Ogness1-6/+26
2024-12-14serial: amba-pl011: fix build regressionArnd Bergmann1-0/+2
2024-12-14serial: 8250_dw: Add Sophgo SG2044 quirkInochi Amaoto1-2/+3
2024-12-14serial: amba-pl011: Fix RX stall when DMA is usedKartik Rajput1-0/+5
2024-12-14serial: amba-pl011: Use port lock wrappersThomas Gleixner1-36/+36
2024-12-14serial: 8250: omap: Move pm_runtime_get_syncBin Liu1-2/+2
2024-12-14serial: 8250_fintek: Add support for F81216EFilip Brozovic1-1/+13
2024-12-14Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"Greg Kroah-Hartman1-28/+0
2024-12-14serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-0/+28
2024-12-14serial: sc16is7xx: fix invalid FIFO access with special register setHugo Villeneuve1-0/+5
2024-11-01serial: protect uart_port_dtr_rts() in uart_shutdown() tooJiri Slaby (SUSE)1-7/+9
2024-11-01serial: imx: Update mctrl old_status on RTSD interruptMarek Vasut1-0/+15
2024-11-01serial: Make uart_handle_cts_change() status param bool activeIlpo Järvinen4-8/+7
2024-11-01tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool activeIlpo Järvinen2-8/+8
2024-10-17tty: rp2: Fix reset with non forgiving PCIe host bridgesFlorian Fainelli1-1/+1
2024-08-29tty: atmel_serial: use the correct RTS flag.Mathieu Othacehe1-1/+1
2024-08-14serial: core: check uartclk for zero to avoid divide by zeroGeorge Kennedy1-0/+8
2024-07-11serial: imx: Raise TX trigger level to 8Matthias Schiffer1-1/+1
2024-07-05serial: 8250_omap: Fix Errata i2310 with RX FIFO level checkUdit Kumar1-1/+2
2024-07-05serial: imx: only set receiver level if it is zeroStefan Eichenberger1-2/+6
2024-07-05tty: mcf: MCF54418 has 10 UARTSJean-Michel Hautbois1-1/+1
2024-07-05serial: imx: set receiver level before starting uartStefan Eichenberger1-1/+3
2024-07-05serial: 8250_omap: Implementation of Errata i2310Udit Kumar1-5/+20
2024-06-27serial: exar: adding missing CTI and Exar PCI idsParker Newman1-0/+42
2024-06-27serial: imx: Introduce timeout when waiting on transmitter emptyEsben Haabendal1-3/+4
2024-06-21serial: 8250_dw: fall back to poll if there's no interruptJisheng Zhang1-1/+4
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-15 15:46:37 +0300