summaryrefslogtreecommitdiff
path: root/drivers/scsi/ipr.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-16scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal1-1/+1
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-12scsi: ipr: Switch to using ->device_configureChristoph Hellwig1-4/+6
Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240409143748.980206-16-hch@lst.de Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-06scsi: ipr: Remove obsolete check for old CPUsMichael Ellerman1-55/+0
The IPR driver has a routine to check whether it's running on certain CPU versions and if so whether the adapter is supported on that CPU. But none of the CPUs it checks for are supported by Linux anymore. The most recent CPU it checks for is Power4+ which was removed in commit 471d7ff8b51b ("powerpc/64s: Remove POWER4 support"). So drop the check. That makes the "testmode" module parameter unused, so remove it as well. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.au Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-11scsi: ipr: Do PCI error checks on own lineIlpo Järvinen1-4/+8
Instead of "if" conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
2023-04-25scsi: ipr: Remove several unused variablesTom Rix1-14/+0
gcc with W=1 reports drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’: drivers/scsi/ipr.c:1104:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1104 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’: drivers/scsi/ipr.c:1261:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1261 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’: drivers/scsi/ipr.c:4417:36: error: variable ‘res’ set but not used [-Werror=unused-but-set-variable] 4417 | struct ipr_resource_entry *res; | ^~~ These variables are not used, so remove them. The lock around res is not needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove them as well. Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-19scsi: ipr: Remove SATA supportBrian King1-764/+10
Linux SATA support in ipr has always been limited to SATA DVDs. The last systems that had the option of including a SATA DVD was Power 8, which have been withdrawn for some time now, so this support can be removed. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: ipr: Declare SCSI host template constBart Van Assche1-1/+1
Make it explicit that the SCSI host template is not modified. Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-48-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-30/+24
Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ...
2023-02-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+2
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ...
2023-02-22scsi: ipr: Work around fortify-string warningArnd Bergmann1-20/+21
The ipr_log_vpd_compact() function triggers a fortified memcpy() warning about a potential string overflow with all versions of clang: In file included from drivers/scsi/ipr.c:43: In file included from include/linux/string.h:254: include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __write_overflow_field(p_size_field, size); ^ include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 2 errors generated. I don't see anything actually wrong with the function, but this is the only instance I can reproduce of the fortification going wrong in the kernel at the moment, so the easiest solution may be to rewrite the function into something that does not trigger the warning. Instead of having a combined buffer for vendor/device/serial strings, use three separate local variables and just truncate the whitespace individually. Link: https://lore.kernel.org/r/20230214132831.2118392-1-arnd@kernel.org Cc: Kees Cook <keescook@chromium.org> Fixes: 8cf093e275d0 ("[SCSI] ipr: Improved dual adapter errors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-22scsi: ipr: Make ipr_probe_ioa_part2() return voidDeepak R Varma1-10/+3
Convert function ipr_probe_ioa_part2() to return void instead of int since the current implementation always returns 0 to the caller. The transformation also eliminates the dead code when calling ipr_probe_ioa_part2() function. Issue identified using returnvar Coccinelle semantic patch. Link: https://lore.kernel.org/r/Y7rvQyMOGcPKPTv8@ubun2204.myguest.virtualbox.org Signed-off-by: Deepak R Varma <drv@mailo.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-19scsi: ipr: Replace kmap() with kmap_local_page()Fabio M. De Francesco1-7/+2
The use of kmap() is deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Therefore, replace kmap() with kmap_local_page() in ipr_copy_ucode_buffer() and, instead of open-coding local mappings + memcpy() + local un-mappings, use the better suited memcpy_to_page() helper. Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20230103182556.29080-1-fmdefrancesco@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-04ata: libata: simplify qc_fill_rtf port operation interfaceDamien Le Moal1-6/+1
The boolean return value of the qc_fill_rtf operation is used nowhere. Simplify this operation interface by making it a void function. All drivers defining this operation are also updated. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-01-04ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EHNiklas Cassel1-2/+2
The name ATA_QCFLAG_FAILED is misleading since it does not mean that a QC completed in error, or that it didn't complete at all. It means that libata decided to schedule EH for the QC, so the QC is now owned by the libata error handler (EH). The normal execution path is responsible for not accessing a QC owned by EH. libata core enforces the rule by returning NULL from ata_qc_from_tag() for QCs owned by EH. It is quite easy to mistake that a QC marked with ATA_QCFLAG_FAILED was an error. However, a QC that was actually an error is instead indicated by having qc->err_mask set. E.g. when we have a NCQ error, we abort all QCs, which currently will mark all QCs as ATA_QCFLAG_FAILED. However, it will only be a single QC that is an error (i.e. has qc->err_mask set). Rename ATA_QCFLAG_FAILED to ATA_QCFLAG_EH to more clearly highlight that this flag simply means that a QC is now owned by EH. This new name will not mislead to think that the QC was an error (which is instead indicated by having qc->err_mask set). This also makes it more obvious that the EH code skips all QCs that do not have ATA_QCFLAG_EH set (rather than ATA_QCFLAG_FAILED), since the EH code should simply only care about QCs that are owned by EH itself. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-11-26scsi: ipr: Fix WARNING in ipr_init()Shang XiaoJing1-1/+9
ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-08scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu1-2/+2
Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-17scsi: ipr: Use kobj_to_dev()Minghao Chi1-5/+5
Use kobj_to_dev() instead of open-coding it. Link: https://lore.kernel.org/r/20220510105113.1351891-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: ipr: Directly return instead of using local ret variableHaowen Bai1-2/+1
Fixes coccinelle warning: ./drivers/scsi/ipr.c:10095:13-15: Unneeded variable: "rc". Return "IRQ_HANDLED" on line 10104 Link: https://lore.kernel.org/r/1648433103-24308-1-git-send-email-baihaowen@meizu.com Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-17scsi: ipr: Switch to attribute groupsBart Van Assche1-17/+21
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-26-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-17scsi: ipr: Call scsi_done() directlyBart Van Assche1-5/+5
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-42-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-29scsi: ipr: System crashes when seeing type 20 errorWen Xiong1-2/+2
Test team saw "4041: Incomplete multipath connection between enclosure and device" when I/O drawers/drives have bad connections. System crashes when handling these type 20 errors. [ 5.332452] ipr: 3/00-06-09: 4041: Incomplete multipath connection between enclosure and device [ 5.332460] ipr: 3/00-06-09: The IOA failed to detect an expected path to a device [ 5.332465] ipr: 3/00-06-09: Inactive path is failed: Resource Path=3/00-04-09 [ 5.332471] ipr: 3/00-06-09: Functional IOA port: Resource Path=3/00-04, Link rate=unknown, WWN=5005076059C38E05 [ 5.332478] ipr: 3/00-06-09: Incorrectly connected Device LUN: Resource Path=3/00-00-00-00-00-00-00-00-00-20-00-00-24-00-00-00-0, Link rate=unknown, WWN=0020000024000000 [ 5.332487] ipr: 3/00-06-09: Path element=FF: Resource Path=3/50-05-07-60-45-56-5A-9C-00-00-00-00-00-00-00-00-0, Link rate=unknown WWN=0000000000000000 [ 5.332492] ipr: 00000000: 54520EC8 00000000 00000000 4E532050 [ 5.332495] ipr: 00000010: 45522054 49434B3D 00000050 278130E6 [ 5.332498] ipr: 00000020: 033B5300 03282584 4C4D00E0 278039F3 [ 5.332501] ipr: 00000030: 033B5180 03282404 4C4D00E0 276A0282 [ 5.332504] ipr: 00000040: 033B5000 03281E04 447000E0 27697D19 [ 5.332507] ipr: 00000050: 033B4E80 03281D84 447000E0 27690524 [ 5.332509] ipr: 00000060: 033B4D00 03281C84 447000E0 27687FDA [ 5.332512] ipr: 00000070: 033B4B80 03281C04 447000E0 2767E787 [ 5.332515] ipr: 00000080: 033B4A00 03281B04 447000E0 27674F0A Link: https://lore.kernel.org/r/1624587085-10073-1-git-send-email-wenxiong@linux.vnet.ibm.com Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-19scsi: ipr: Fix incorrect function names in their headersLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:5335: warning: expecting prototype for ipr_eh_dev_reset(). Prototype was for __ipr_eh_dev_reset() instead drivers/scsi/ipr.c:5594: warning: expecting prototype for ipr_eh_abort(). Prototype was for ipr_scan_finished() instead drivers/scsi/ipr.c:5616: warning: expecting prototype for ipr_eh_host_reset(). Prototype was for ipr_eh_abort() instead drivers/scsi/ipr.c:6725: warning: expecting prototype for ipr_info(). Prototype was for ipr_ioa_info() instead [mkp: tweaked ipr_scan_finished() comment] Link: https://lore.kernel.org/r/20210317091230.2912389-3-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-27scsi: Remove unneeded break statementsTom Rix1-1/+0
A break is not needed if it is preceded by a return or goto. Link: https://lore.kernel.org/r/20201019142333.16584-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-33/+57
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-07-16scsi: ipr: Remove a bunch of set but checked variablesLee Jones1-11/+6
Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/ipr.c:73: drivers/scsi/ipr.c: In function ‘ipr_mask_and_clear_interrupts’: drivers/scsi/ipr.c:740:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_cancel_op’: drivers/scsi/ipr.c:5497:13: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_iopoll’: drivers/scsi/ipr.c:5765:22: warning: variable ‘ioa_cfg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_reset_restore_cfg_space’: drivers/scsi/ipr.c:8662:6: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_test_msi’: Link: https://lore.kernel.org/r/20200713080001.128044-14-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-16scsi: ipr: Fix a mountain of kerneldoc misdemeanoursLee Jones1-22/+51
Mainly misspellings and/or missing function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path' drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path' drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target' drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout' drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout' drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout' drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout' drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version' drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state' drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw' drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type' drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth' drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free' drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset' drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout' drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished' drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh' drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info' drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info' drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done' drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done' drivers/scsi/ipr.c:9486: warning: bad line: drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources' drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr' drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe' drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt' Link: https://lore.kernel.org/r/20200713080001.128044-12-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-16scsi: Wire up ata_scsi_dma_need_drain for SAS HBA driversChristoph Hellwig1-0/+1
We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI devices through libata. That also includes the SAS HBA drivers in addition to native libata HBA drivers. Link: https://lore.kernel.org/r/20200615064624.37317-3-hch@lst.de Fixes: cc97923a5bcc ("block: move dma drain handling to scsi") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-25scsi: ipr: Remove NULL check before freeing functionJason Yan1-2/+1
Fix the following coccicheck warning: drivers/scsi/ipr.c:9533:2-18: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20200418095903.35118-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-15scsi: ipr: remove unneeded semicolonJason Yan1-1/+1
Fix the following coccicheck warning: drivers/scsi/ipr.c:1167:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200413082822.24356-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-3/+3
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-03-17scsi: ipr: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-3/+3
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Link: https://lore.kernel.org/r/20200315094241.9086-6-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Brian King <brking@us.ibm.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-11scsi: ipr: Fix softlockup when rescanning devices in petitbootWen Xiong1-1/+2
When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.com Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-03compat_ioctl: scsi: handle HDIO commands from driversArnd Bergmann1-0/+3
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-12Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-13/+16
Pull SCSI scatter-gather list updates from James Bottomley: "This topic branch covers a fundamental change in how our sg lists are allocated to make mq more efficient by reducing the size of the preallocated sg list. This necessitates a large number of driver changes because the previous guarantee that if a driver specified SG_ALL as the size of its scatter list, it would get a non-chained list and didn't need to bother with scatterlist iterators is now broken and every driver *must* use scatterlist iterators. This was broken out as a separate topic because we need to convert all the drivers before pulling the trigger and unconverted drivers kept being found, necessitating a rebase" * tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation scsi: core: avoid preallocating big SGL for data scsi: core: avoid preallocating big SGL for protection information scsi: lib/sg_pool.c: improve APIs for allocating sg pool scsi: esp: use sg helper to iterate over scatterlist scsi: NCR5380: use sg helper to iterate over scatterlist scsi: wd33c93: use sg helper to iterate over scatterlist scsi: ppa: use sg helper to iterate over scatterlist scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist scsi: imm: use sg helper to iterate over scatterlist scsi: aha152x: use sg helper to iterate over scatterlist scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist scsi: usb: image: microtek: use sg helper to iterate over scatterlist scsi: pmcraid: use sg helper to iterate over scatterlist scsi: ipr: use sg helper to iterate over scatterlist scsi: mvumi: use sg helper to iterate over scatterlist scsi: lpfc: use sg helper to iterate over scatterlist scsi: advansys: use sg helper to iterate over scatterlist ...
2019-06-20scsi: ipr: use sg helper to iterate over scatterlistMing Lei1-13/+16
Unlike the legacy I/O path, scsi-mq preallocates a large array to hold the scatterlist for each request. This static allocation can consume substantial amounts of memory on modern controllers which support a large number of concurrently outstanding requests. To facilitate a switch to a smaller static allocation combined with a dynamic allocation for requests that need it, we need to make sure all SCSI drivers handle chained scatterlists correctly. Convert remaining drivers that directly dereference the scatterlist array to using the iterator functions. [mkp: clarified commit message] Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-09scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_templateNathan Chancellor1-1/+2
Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Bradley Grove <bgrove@attotech.com> Acked-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-19scsi: flip the default on use_clusteringChristoph Hellwig1-1/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: ipr: System hung while dlpar adding primary ipr adapter backWen Xiong1-45/+61
While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+25
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-06-20scsi: ipr: Format HCAM overlay ID 0x41Wen Xiong1-0/+25
This patch adds formatting error overlay 0x41 to improve debug capabilities. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: ipr: Eliminate duplicate barriersArnd Bergmann1-2/+0
Driver does both wmb() and writel(). The latter already has a barrier on some architectures like arm64. This ends up with CPU observing two barriers back to back before executing the register write. Drivers should generally assume that the barrier implied by writel() is sufficient for ordering DMA. Remove the extraneous wmb() before it. [mkp: Squashed Arnd's and Sinan's patches] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-13treewide: Use array_size() in vmalloc()Kees Cook1-2/+4
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-4/+6
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-15scsi: ipr: new IOASC updateWen Xiong1-0/+2
This patch adds new adapter error log for P9 system with the new AZ SAS cable. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-13scsi: ipr: Use dma_pool_zalloc()Souptick Joarder1-2/+2
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-14scsi: ipr: Use sgl_alloc_order() and sgl_free_order()Bart Van Assche1-41/+8
Use the sgl_alloc_order() and sgl_free_order() functions instead of open coding these functions. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-05scsi: ipr: fix incorrect indentation of assignment statementColin Ian King1-2/+2
Remove one extraneous level of indentation on an assignment statement. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-22treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook1-4/+4
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 14:35:22 +0300