summaryrefslogtreecommitdiff
path: root/drivers/net/wwan/iosm
AgeCommit message (Collapse)AuthorFilesLines
2025-01-16net: wwan: iosm: Fix hibernation by re-binding the driver around itMaciej S. Szmigiero1-1/+55
Currently, the driver is seriously broken with respect to the hibernation (S4): after image restore the device is back into IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs full re-launch of the rest of its firmware, but the driver restore handler treats the device as merely sleeping and just sends it a wake-up command. This wake-up command times out but device nodes (/dev/wwan*) remain accessible. However attempting to use them causes the bootloader to crash and enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash dump is ready"). It seems that the device cannot be re-initialized from this crashed stage without toggling some reset pin (on my test platform that's apparently what the device _RST ACPI method does). While it would theoretically be possible to rewrite the driver to tear down the whole MUX / IPC layers on hibernation (so the bootloader does not crash from improper access) and then re-launch the device on restore this would require significant refactoring of the driver (believe me, I've tried), since there are quite a few assumptions hard-coded in the driver about the device never being partially de-initialized (like channels other than devlink cannot be closed, for example). Probably this would also need some programming guide for this hardware. Considering that the driver seems orphaned [1] and other people are hitting this issue too [2] fix it by simply unbinding the PCI driver before hibernation and re-binding it after restore, much like USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar problem. Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses the existing suspend / resume handlers) and S4 (which uses the new code). [1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/ [2]: https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413 Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-03net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()Maciej S. Szmigiero1-1/+1
ipc_mmio_init() used the post-decrement operator in its loop continuing condition of "retries" counter being "> 0", which meant that when this condition caused loop exit "retries" counter reached -1. But the later valid exec stage failure check only tests for "retries" counter being exactly zero, so it didn't trigger in this case (but would wrongly trigger if the code reaches a valid exec stage in the very last loop iteration). Fix this by using the pre-decrement operator instead, so the loop counter is exactly zero on valid exec stage failure. Fixes: dc0514f5d828 ("net: iosm: mmio scratchpad") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://patch.msgid.link/8b19125a825f9dcdd81c667c1e5c48ba28d505a6.1735490770.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-06net: wwan: iosm: Fix tainted pointer delete is case of region creation failAleksandr Mishin1-1/+1
In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4dcd183fbd67 ("net: wwan: iosm: devlink registration") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-22devlink: extend devlink_param *set pointerMateusz Polchlopek1-1/+2
Extend devlink_param *set function pointer to take extack as a param. Sometimes it is needed to pass information to the end user from set function. It is more proper to use for that netlink instead of passing message to dmesg. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-65/+4
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19drivers: net: wwan: iosm: Fixed multiple typos in multiple filesMuhammad Muzammil6-7/+7
iosm_ipc_chnl_cfg.h: Fixed typo iosm_ipc_imem_ops.h: Fixed typo iosm_ipc_mux.h: Fixed typo iosm_ipc_pm.h: Fixed typo iosm_ipc_port.h: Fixed typo iosm_ipc_trace.h: Fixed typo Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231014121407.10012-1-m.muzzammilashraf@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18Revert "net: wwan: iosm: enable runtime pm support for 7560"Bagas Sanjaya6-65/+4
Runtime power management support breaks Intel LTE modem where dmesg dump showes timeout errors: ``` [ 72.027442] iosm 0000:01:00.0: msg timeout [ 72.531638] iosm 0000:01:00.0: msg timeout [ 73.035414] iosm 0000:01:00.0: msg timeout [ 73.540359] iosm 0000:01:00.0: msg timeout ``` Furthermore, when shutting down with `poweroff` and modem attached, the system rebooted instead of powering down as expected. The modem works again only after power cycling. Revert runtime power management support for IOSM driver as introduced by commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for 7560"). Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560") Reported-by: Martin <mwolf@adiumentum.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996 Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/ Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-10/+7
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: wwan: iosm: Convert single instance struct member to flexible arrayKees Cook2-10/+7
struct mux_adth actually ends with multiple struct mux_adth_dg members. This is seen both in the comments about the member: /** * struct mux_adth - Structure of the Aggregated Datagram Table Header. ... * @dg: datagramm table with variable length */ and in the preparation for populating it: adth_dg_size = offsetof(struct mux_adth, dg) + ul_adb->dg_count[i] * sizeof(*dg); ... adth_dg_size -= offsetof(struct mux_adth, dg); memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size); This was reported as a run-time false positive warning: memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8) Adjust the struct mux_adth definition and associated sizeof() math; no binary output differences are observed in the resulting object file. Reported-by: Florian Klink <flokli@flokli.de> Closes: https://lore.kernel.org/lkml/dbfa25f5-64c8-5574-4f5d-0151ba95d232@gmail.com/ Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-12net: wwan: iosm: enable runtime pm support for 7560M Chetan Kumar6-4/+65
Adds runtime pm support for 7560. As part of probe procedure auto suspend is enabled and auto suspend delay is set to 5000 ms for runtime pm use. Later auto flag is set to power manage the device at run time. On successful communication establishment between host and device the device usage counter is dropped and request to put the device into sleep state (suspend). In TX path, the device usage counter is raised and device is moved out of sleep(resume) for data transmission. In RX path, if the device has some data to be sent it request host platform to change the power state by giving PCI PME message. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-12/+33
Conflicts: drivers/net/ethernet/freescale/fec_main.c 6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-17net: wwan: iosm: fix NULL pointer dereference when removing deviceM Chetan Kumar3-12/+33
In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Reported-by: Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-11net: wwan: iosm: clean up unused struct membersM Chetan Kumar2-6/+0
Below members are unused. - td_tag member defined in struct ipc_pipe. - adb_finish_timer & params defined in struct iosm_mux. Remove it to avoid unexpected usage. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/92ee483d79dfc871ed7408da8fec60b395ff3a9c.1683649868.git.m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-11net: wwan: iosm: remove unused enum definitionM Chetan Kumar1-11/+0
ipc_time_unit enum is defined but not used. Remove it to avoid unexpected usage. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/8295a6138f13c686590ee4021384ee992f717408.1683649868.git.m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-11net: wwan: iosm: remove unused macro definitionM Chetan Kumar1-2/+0
IOSM_IF_ID_PAYLOAD is defined but not used. Remove it to avoid unexpected usage. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/0697e811cb7f10b4fd8f99e66bda1329efdd3d1d.1683649868.git.m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-12net: wwan: iosm: Fix error handling path in ipc_pcie_probe()Harshit Mogalapalli1-1/+2
Smatch reports: drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe() warn: missing unwind goto? When dma_set_mask fails it directly returns without disabling pci device and freeing ipc_pcie. Fix this my calling a correct goto label As dma_set_mask returns either 0 or -EIO, we can use a goto label, as it finally returns -EIO. Add a set_mask_fail goto label which stands consistent with other goto labels in this function.. Fixes: 035e3befc191 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+7
Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") 924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29net: wwan: iosm: fixes 7560 modem crashM Chetan Kumar1-0/+7
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in modem crash. 7560 Modem FW uses the MBIM interface for control command communication whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for 7560. Fixes: d08b0f8f46e4 ("net: wwan: iosm: add rpc interface for xmm modems") Reported-and-tested-by: Martin <mwolf@adiumentum.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200 Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Shane Parslow <shaneparslow808@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-18wwan: core: Support slicing in port TX flow of WWAN subsystemhaozhe chang1-1/+2
wwan_port_fops_write inputs the SKB parameter to the TX callback of the WWAN device driver. However, the WWAN device (e.g., t7xx) may have an MTU less than the size of SKB, causing the TX buffer to be sliced and copied once more in the WWAN device driver. This patch implements the slicing in the WWAN subsystem and gives the WWAN devices driver the option to slice(by frag_len) or not. By doing so, the additional memory copy is reduced. Meanwhile, this patch gives WWAN devices driver the option to reserve headroom in fragments for the device-specific metadata. Signed-off-by: haozhe chang <haozhe.chang@mediatek.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net: wwan: iosm: fix memory leak in ipc_mux_init()Zhengchao Shao1-0/+1
When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20221203020903.383235-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-14/+16
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-28net: wwan: iosm: fix incorrect skb lengthM Chetan Kumar1-7/+11
skb passed to network layer contains incorrect length. In mux aggregation protocol, the datagram block received from device contains block signature, packet & datagram header. The right skb len to be calculated by subracting datagram pad len from datagram length. Whereas in mux lite protocol, the skb contains single datagram so skb len is calculated by subtracting the packet offset from datagram header. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix crash in peek throughput testM Chetan Kumar1-3/+2
Peek throughput UL test is resulting in crash. If the UL transfer block free list is exhaust, the peeked skb is freed. In the next transfer freed skb is referred from UL list which results in crash. Don't free the skb if UL transfer blocks are unavailable. The pending skb will be picked for transfer on UL transfer block available. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix dma_alloc_coherent incompatible pointer typeM Chetan Kumar1-1/+1
Fix build error reported on armhf while preparing 6.1-rc5 for Debian. iosm_ipc_protocol.c:244:36: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type. Change phy_ap_shm type from phys_addr_t to dma_addr_t. Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol") Reported-by: Bonaccorso Salvatore <carnil@debian.org> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-28net: wwan: iosm: fix kernel test robot reported errorM Chetan Kumar1-2/+1
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain integer as NULL pointer. Use skb_trim() to reset skb tail & len. Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-22net: wwan: iosm: use ACPI_FREE() but not kfree() in ipc_pcie_read_bios_cfg()Wang ShaoBo1-1/+1
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI memory, because we need to track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree(). Fixes: d38a648d2d6c ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-39/+33
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: wwan: iosm: fix kernel test robot reported errorsM Chetan Kumar2-0/+2
Include linux/vmalloc.h in iosm_ipc_coredump.c & iosm_ipc_devlink.c to resolve kernel test robot errors. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix invalid mux header typeM Chetan Kumar2-0/+9
Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram. During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops. Override the UL/DL size and TD count for Mux aggregation protocol. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix driver not working with INTEL_IOMMU disabledM Chetan Kumar1-0/+7
With INTEL_IOMMU disable config or by forcing intel_iommu=off from grub some of the features of IOSM driver like browsing, flashing & coredump collection is not working. When driver calls DMA API - dma_map_single() for tx transfers. It is resulting in dma mapping error. Set the device DMA addressing capabilities using dma_set_mask() and remove the INTEL_IOMMU dependency in kconfig so that driver follows the platform config either INTEL_IOMMU enable or disable. Fixes: f7af616c632e ("net: iosm: infrastructure") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfgM Chetan Kumar1-3/+8
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use. Fixes: 7e98d785ae61 ("net: iosm: entry point") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: iosm: Remove unnecessary if_mutex lockZhaoping Shu1-36/+6
These WWAN network interface operations (create/delete/open/close) are already protected by RTNL lock, i.e., wwan_ops.newlink(), wwan_ops.dellink(), net_device_ops.ndo_open() and net_device.ndo_stop() are called with RTNL lock held. Therefore, this patch removes the unnecessary if_mutex. Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: iosm: fix memory leak in ipc_wwan_dellinkHW He1-0/+1
IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: 2a54f2c77934 ("net: iosm: net driver") Signed-off-by: HW He <hw.he@mediatek.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: wwan: iosm: add rpc interface for xmm modemsShane Parslow1-1/+1
Add a new iosm wwan port that connects to the modem rpc interface. This interface provides a configuration channel, and in the case of the 7360, is the only way to configure the modem (as it does not support mbim). The new interface is compatible with existing software, such as open_xdatachannel.py from the xmm7360-pci project [1]. [1] https://github.com/xmm7360/xmm7360-pci Signed-off-by: Shane Parslow <shaneparslow808@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+3
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: wwan: iosm: Call mutex_init before locking itMaxim Mikityanskiy1-2/+3
wwan_register_ops calls wwan_create_default_link, which ends up in the ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this mutex is not yet initialized by that point. Fix it by moving mutex_init above the wwan_register_ops call. This also makes the order of operations in ipc_wwan_init symmetric to ipc_wwan_deinit. Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-29net: wwan: iosm: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-1/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220927023254.30342-1-shangxiaojing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20net: wwan: iosm: Fix return type of ipc_wwan_link_transmitNathan Huckleberry1-2/+2
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ipc_wwan_link_transmit should be changed from int to netdev_tx_t. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20220912214455.929028-1-nhuck@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-21wwan: iosm: use a flexible array rather than allocate short objectsJakub Kicinski1-4/+1
GCC array-bounds warns that ipc_coredump_get_list() under-allocates the size of struct iosm_cd_table *cd_table. This is avoidable - we just need a flexible array. Nothing calls sizeof() on struct iosm_cd_list or anything that contains it. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220520060013.2309497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: wwan: iosm: remove pointless null checkJakub Kicinski1-10/+0
GCC 12 warns: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress] 406 | if (!IPC_CB(skb)) { | ^ Indeed the check seems entirely pointless. Hopefully the other validation checks will catch if the cb is bad, but it can't be NULL. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-14net: wwan: iosm: drop debugfs dev referenceM Chetan Kumar2-2/+5
Post debugfs use call wwan_put_debugfs_dir()to drop debugfs dev reference. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: wwan: iosm: Enable M.2 7360 WWAN card supportM Chetan Kumar10-78/+1033
This patch enables Intel M.2 7360 WWAN card support on IOSM Driver. Control path implementation is a reuse whereas data path implementation it uses a different protocol called as MUX Aggregation. The major portion of this patch covers the MUX Aggregation protocol implementation used for IP traffic communication. For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for control communication. The user space application or the modem manager to use wwan AT port for data path establishment. During probe, driver reads the mux protocol device capability register to know the mux protocol version supported by device. Base on which the right mux protocol is initialized for data path communication. An overview of an Aggregation Protocol 1> An IP packet is encapsulated with 16 octet padding header to form a Datagram & the start offset of the Datagram is indexed into Datagram Header (DH). 2> Multiple such Datagrams are composed & the start offset of each DH is indexed into Datagram Table Header (DTH). 3> The Datagram Table (DT) is IP session specific & table_length item in DTH holds the number of composed datagram pertaining to that particular IP session. 4> And finally the offset of first DTH is indexed into DBH (Datagram Block Header). So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is exchanged between driver & device. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05Revert "net: wwan: iosm: Keep device at D0 for s2idle case"M Chetan Kumar1-3/+0
Depending on BIOS configuration IOSM driver exchanges protocol required for putting device into D3L2 or D3L1.2. ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2. This patch forces PCI core know this device should stay at D0. - pci_save_state()is expensive since it does a lot of slow PCI config reads. The reported issue is not observed on x86 platform. The supurios wake on AMD platform needs to be futher debugged with orignal patch submitter [1]. Also the impact of adding pci_save_state() needs to be assessed by testing it on other platforms. This reverts commit f4dd5174e273("net: wwan: iosm: Keep device at D0 for s2idle case"). [1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-27net: wwan: iosm: Keep device at D0 for s2idle caseKai-Heng Feng1-0/+3
We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops. This prevent those laptops to stay in s2idle state. >From what I can understand, the intention of ipc_pcie_suspend() is to put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the device at D0. However, the device can still be put to D3hot/D3cold by PCI core. So explicitly let PCI core know this device should stay at D0, to solve the spurious wakeup. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: wwan: iosm: Let PCI core handle PCI power transitionKai-Heng Feng1-47/+2
pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power transition for system-wide suspend and resume, so it's not necessary to do it in the driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-11net: wwan: iosm: correct open parenthesis alignmentM Chetan Kumar1-1/+1
Fix checkpatch warning in iosm_ipc_mmio.c - Alignment should match open parenthesis Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-11net: wwan: iosm: removed unused function declM Chetan Kumar1-10/+0
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is not defined. Removed the dead code. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-11net: wwan: iosm: release data channel in case no active IP sessionM Chetan Kumar4-21/+27
If there is no active IP session (interface up & running) then release the data channel. Use nr_sessions variable to track current active IP sessions. If the count drops to 0, then send pipe close ctrl message to release the data channel. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-20 01:38:20 +0300