summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/brocade
AgeCommit message (Collapse)AuthorFilesLines
2016-08-09bna: remove global bnad_list_mutexIvan Vecera1-20/+0
Remove global bnad_list_mutex as it is not used anymore. This makes bnad_add_to_list() and bnad_remove_from_list() empty so remove them too. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09bna: change type of bna_id to atomic_tIvan Vecera1-2/+2
Change type of bna_id to atomic_t. The bnad_list_mutex is used to prevent a race when bna_id is incremented. After the change the mutex can be removed in the next step. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09bna: remove useless linked listIvan Vecera2-4/+0
Remove global variable bnad_list and bnad->list_entry that are used as list of bna driver instances. It is not necessary and useless. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: bna: use correct type specifier (2)xypron.glpk@gmx.de1-1/+2
add and val are read with sscanf(kern_buf, "%x:%x", &addr, &val); and used as arguments for bna_reg_offset_check and writel so they have to be unsigned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01net: bna: use correct type specificationsxypron.glpk@gmx.de1-1/+2
addr and len are read with sscanf(kern_buf, "%x:%x", &addr, &len); and used as arguments for bna_reg_offset_check. So they have to be unsigned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bna: fix list corruptionIvan Vecera1-1/+1
Use list_move_tail() to move MAC address entry from list of pending to list of active entries. Simple list_add_tail() leaves the entry also in the first list, this leads to list corruption. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-16bna: fix Rx data corruption with VLAN stripping enabled and MTU > 4096Ivan Vecera1-13/+24
The multi-buffer Rx mode implemented in the past introduced a regression that causes a data corruption for received VLAN traffic when VLAN tag stripping is enabled. This mode is supported only be newer chipsets (1860) and is enabled when MTU > 4096. When this mode is enabled Rx queue contains buffers with fixed size 2048 bytes. Any incoming packet larger than 2048 is divided into multiple buffers that are attached as skb frags in polling routine. The driver assumes that all buffers associated with a packet except the last one is fully used (e.g. packet with size 5000 are divided into 3 buffers 2048 + 2048 + 904 bytes) and ignores true size reported in completions. This assumption is usually true but not when VLAN packet is received and VLAN tag stripping is enabled. In this case the first buffer is 2044 bytes long but as the driver always assumes 2048 bytes then 4 extra random bytes are included between the first and the second frag. Additionally the driver sets checksum as correct so the packet is properly processed by the core. The driver needs to check the size of used space in each Rx buffer reported by FW and not blindly use the fixed value. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29bna: fix error handlingAndrzej Hajda1-6/+7
Several functions can return negative value in case of error, so their return type should be fixed as well as type of variables to which this value is assigned. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21bna: check for dma mapping errorsIvan Vecera5-1/+37
Check for DMA mapping errors, recover from them and register them in ethtool stats like other errors. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10bna: fix interrupts storm caused by erroneous packetsIvan Vecera1-1/+1
The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa33 ("bna: Enable Multi Buffer RX") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker1-3/+1
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: remove superfluous parenthesesIvan Vecera6-66/+66
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: make pointers to read-only inputs constIvan Vecera4-21/+20
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21bna: remove unnecessary cast of BIT valueIvan Vecera2-4/+3
BIT value is already unsigned so casting is not necessary. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: use netdev_* and dev_* instead of printk and pr_*Ivan Vecera4-55/+36
...and remove some of them. It is not necessary to log when .probe() and .remove() are called or when TxQ is started or stopped. Also log level of some of them was changed to more appropriate one (link up/down, firmware loading failure. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: fix timeout API argument typeIvan Vecera3-19/+13
Timeout functions are defined with 'void *' ptr argument. They should be defined directly with 'struct bfa_ioc *' type to avoid type conversions. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: use list_for_each_entry where appropriateIvan Vecera4-149/+37
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: get rid of private macros for manipulation with listsIvan Vecera7-308/+130
Remove macros for manipulation with struct list_head and replace them with standard ones. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove useless pointer assignmentIvan Vecera1-1/+0
Pointer cmpl used to iterate through completion entries is updated at the beginning of while loop as well as at the end. The update at the end of the loop is useless. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: use memdup_user to copy userspace buffersIvan Vecera1-19/+8
Patch converts kzalloc->copy_from_user sequence to memdup_user. There is also one useless assignment of NULL to bnad->regdata as it is followed by assignment of kzalloc output. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: correct comparisons/assignments to boolIvan Vecera1-4/+4
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove TX_E_PRIO_CHANGE event and BNA_TX_F_PRIO_CHANGED flagIvan Vecera2-19/+4
TX_E_PRIO_CHANGE event is never sent for bna_tx so it doesn't need to be handled. After this change bna_tx->flags cannot contain BNA_TX_F_PRIO_CHANGED flag and it can be also eliminated. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove paused from bna_rx_config and flags from bna_rxfIvan Vecera2-41/+1
The bna_rx_config struct member paused can be removed as it is never written and as it cannot have non-zero value the bna_rxf struct member flags also cannot have BNA_RXF_F_PAUSED value and is always zero. So the flags member can be removed as well as bna_rxf_flags enum and the code-paths that needs to have non-zero bna_rxf->flags. This clean-up makes bna_rxf_sm_paused state unsed and can be also removed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove RXF_E_PAUSE and RXF_E_RESUME eventsIvan Vecera2-77/+0
RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait and function bna_rxf_fltr_clear are unused after this so remove them also. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove prio_change_cbfn oper_state_cbfn from struct bna_txIvan Vecera2-16/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove oper_state_cbfn from struct bna_rxfIvan Vecera3-25/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove pause_cbfn from struct bna_enetIvan Vecera2-18/+0
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: remove unused cbfn parameterIvan Vecera5-59/+25
removed: bna_rx_ucast_add bna_rx_ucast_del simplified: bna_enet_pause_config bna_rx_mcast_delall bna_rx_mcast_listset bna_rx_mode_set bna_rx_ucast_listset bna_rx_ucast_set Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: use BIT(x) instead of (1 << x)Ivan Vecera6-83/+83
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: get rid of duplicate and unused macrosIvan Vecera8-163/+9
replaced macros: BNA_MAC_IS_EQUAL -> ether_addr_equal BNA_POWER_OF_2 -> is_power_of_2 BNA_TO_POWER_OF_2_HIGH -> roundup_pow_of_two removed unused macros: bfa_fsm_get_state bfa_ioc_clr_stats bfa_ioc_fetch_stats bfa_ioc_get_alt_ioc_fwstate bfa_ioc_isr_mode_set bfa_ioc_maxfrsize bfa_ioc_mbox_cmd_pending bfa_ioc_ownership_reset bfa_ioc_rx_bbcredit bfa_ioc_state_disabled bfa_sm_cmp_state bfa_sm_get_state bfa_sm_send_event bfa_sm_set_state bfa_sm_state_decl BFA_STRING_32 BFI_ADAPTER_IS_{PROTO,TTV,UNSUPP) BFI_IOC_ENDIAN_SIG BNA_{C,RX,TX}Q_PAGE_INDEX_MAX BNA_{C,RX,TX}Q_PAGE_INDEX_MAX_SHIFT BNA_{C,RX,TX}Q_QPGE_PTR_GET BNA_IOC_TIMER_FREQ BNA_MESSAGE_SIZE BNA_QE_INDX_2_PTR BNA_QE_INDX_RANGE BNA_Q_GET_{C,P}I BNA_Q_{C,P}I_ADD BNA_Q_FREE_COUNT BNA_Q_IN_USE_COUNT BNA_TO_POWER_OF_2 containing_rec Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: replace pragma(pack) with attribute __packedIvan Vecera6-127/+103
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: get rid of mac_tIvan Vecera12-32/+26
The patch converts mac_t type to widely used 'u8 [ETH_ALEN]'. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12bna: use ether_addr_copy instead of memcpyIvan Vecera2-18/+16
Parameters of all ether_addr_copy instances were checked for proper alignment. Alignment of bnad_bcast_addr is forced to 2 as the implicit alignment is 1. I have also renamed address parameter of bnad_set_mac_address() to addr. The name mac_addr was a little bit confusing as the real parameter is struct sockaddr *. v2: added __aligned directive to bnad_bcast_addr, renamed parameter of bnad_set_mac_address() (thx joe@perches.com) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: remove obsolete use of EXTRA_CFLAGSJiri Slaby1-2/+0
EXTRA_CFLAGS should be used on the command line only. Since EXTRA_CFLAGS here add only a non-existant path to compiler include paths (by -I), remove EXTRA_CFLAGS completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31bna: fix soft lock-up during firmware initialization failureIvan Vecera1-2/+2
Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31bna: remove unreasonable iocpf timer startIvan Vecera1-4/+0
Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-31bna: fix firmware loading on big-endian machinesIvan Vecera1-0/+7
Firmware required by bna is stored in appropriate files as sequence of LE32 integers. After loading by request_firmware() they need to be byte-swapped on big-endian arches. Without this conversion the NIC is unusable on big-endian machines. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09ethernet: codespell comment spelling fixesJoe Perches5-6/+6
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22bna: Update the Driver and Firmware VersionRasesh Mody2-3/+3
This patch updates the BNA driver version to 3.2.25.1 and the firmware version to 3.2.5.1 Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22bna: QLogic BR-series Adapters Driver RebrandingRasesh Mody31-99/+127
Re-brand the BNA driver to QLogic. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-2/+2
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-27net: incorrect use of init_completion fixupNicholas Mc Guire1-1/+1
The second init_completion call should be a reinit_completion here. patch is against 3.18.0 linux-next Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16bna: use netdev_rss_key_fill() helperEric Dumazet1-1/+1
Use netdev_rss_key_fill() helper, as it provides better support for some bonding setups. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18bna: fix skb->truesize underestimationEric Dumazet1-1/+1
skb->truesize is not meant to be tracking amount of used bytes in an skb, but amount of reserved/consumed bytes in memory. For instance, if we use a single byte in last page fragment, we have to account the full size of the fragment. skb->truesize can be very different from skb->len, that has a very specific safety purpose. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+2
2014-10-07bna: allow transmit tagged framesIvan Vecera2-2/+2
When Tx VLAN offloading is disabled frames with size ~ MTU are not transmitted as the driver does not account 4 bytes of VLAN header added by stack. It should use VLAN_ETH_HLEN instead of ETH_HLEN. The second problem is with newer BNA chips (BNA 1860). These chips filter out any VLAN tagged frames in Tx path. This is a problem when Tx VLAN offloading is disabled and frames are tagged by stack. Older chips like 1010/1020 are not affected as they probably don't do such filtering. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bna: use container_of to resolve bufdesc_ex from bufdescFabian Frederick2-5/+8
Use container_of instead of casting first structure member. Compiled but untested. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-26bna: Support TSO and partial checksum with non-accelerated vlans.Vlad Yasevich1-3/+4
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. CC: Rasesh Mody <rmody@brocade.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+3
Conflicts: drivers/net/Makefile net/ipv6/sysctl_net_ipv6.c Two ipv6_table_template[] additions overlap, so the index of the ipv6_table[x] assignments needed to be adjusted. In the drivers/net/Makefile case, we've gotten rid of the garbage whereby we had to list every single USB networking driver in the top-level Makefile, there is just one "USB_NETWORKING" that guards everything. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 13:05:32 +0300