summaryrefslogtreecommitdiff
path: root/drivers/irqchip/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2025-08-06irqchip: Build IMX_MU_MSI only on ARMArnd Bergmann1-0/+1
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a build failure: drivers/gpio/gpio-sprd.c:8: include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type drivers/iommu/iommufd/viommu.c:4: include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type Tighten the dependency further to only allow compile testing on Arm. This could be refined further to allow certain x86 configs. This was submitted before to address a different build failure, which was fixed differently, but the problem has now returned in a different form. Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250805160952.4006075-1-arnd@kernel.org Link: https://lore.kernel.org/all/20221215164109.761427-1-arnd@kernel.org/
2025-07-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+12
Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ...
2025-07-29Merge tag 'irq-drivers-2025-07-27' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt chip driver updates from Thomas Gleixner: - Add support of forced affinity setting to yet offline CPUs for the MIPS-GIC to ensure that the affinity of per CPU interrupts can be set during the early bringup phase of a secondary CPU in the hotplug code before the CPU is set online and interrupts are enabled - Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI interrupt chip - Make the interrupt routing to RISV-V harts specification compliant so it supports arbitrary hart indices - Add a command line parameter and related handling to disable the generic RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC. Unfortunatly this is required because there is no mechanism available to discover this programatically. - Enable wakeup sources on the Renesas RZV2H driver - Convert interrupt chip drivers, which use a open coded variant of msi_create_parent_irq_domain() to use the new functionality - Convert interrupt chip drivers, which use the old style two level implementation of MSI support over to the MSI parent mechanism to prepare for removing at least one of the three PCI/MSI backend variants. - The usual cleanups and improvements all over the place * tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/riscv-imsic: Add kernel parameter to disable IPIs irqchip/gic-v3: Fix GICD_CTLR register naming irqchip/ls-scfg-msi: Fix NULL dereference in error handling irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain() irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Convert to __free irqchip/alpine-msi: Convert to lock guards irqchip/alpine-msi: Clean up whitespace style irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain() irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain() irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain() irqdomain: Add device pointer to irq_domain_info and msi_domain_info irqchip/renesas-rzv2h: Remove unneeded includes irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/aslint-sswi: Resolve hart index ...
2025-07-29Merge tag 'kvmarm-6.17' of ↵Paolo Bonzini1-0/+12
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, round #1 - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes.
2025-07-08irqchip/gic-v5: Add GICv5 ITS supportLorenzo Pieralisi1-0/+3
The GICv5 architecture implements Interrupt Translation Service (ITS) components in order to translate events coming from peripherals into interrupt events delivered to the connected IRSes. Events (ie MSI memory writes to ITS translate frame), are translated by the ITS using tables kept in memory. ITS translation tables for peripherals is kept in memory storage (device table [DT] and Interrupt Translation Table [ITT]) that is allocated by the driver on boot. Both tables can be 1- or 2-level; the structure is chosen by the driver after probing the ITS HW parameters and checking the allowed table splits and supported {device/event}_IDbits. DT table entries are allocated on demand (ie when a device is probed); the DT table is sized using the number of supported deviceID bits in that that's a system design decision (ie the number of deviceID bits implemented should reflect the number of devices expected in a system) therefore it makes sense to allocate a DT table that can cater for the maximum number of devices. DT and ITT tables are allocated using the kmalloc interface; the allocation size may be smaller than a page or larger, and must provide contiguous memory pages. LPIs INTIDs backing the device events are allocated one-by-one and only upon Linux IRQ allocation; this to avoid preallocating a large number of LPIs to cover the HW device MSI vector size whereas few MSI entries are actually enabled by a device. ITS cacheability/shareability attributes are programmed according to the provided firmware ITS description. The GICv5 partially reuses the GICv3 ITS MSI parent infrastructure and adds functions required to retrieve the ITS translate frame addresses out of msi-map and msi-parent properties to implement the GICv5 ITS MSI parent callbacks. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-28-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-08irqchip/gic-v3: Rename GICv3 ITS MSI parentLorenzo Pieralisi1-0/+4
The GICv5 ITS will reuse some GICv3 ITS MSI parent functions therefore it makes sense to keep the code functionality in a compilation unit shared by the two drivers. Rename the GICv3 ITS MSI parent file and update the related Kconfig/Makefile entries to pave the way for code sharing. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-26-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-08irqchip/gic-v5: Add GICv5 PPI supportLorenzo Pieralisi1-0/+5
The GICv5 CPU interface implements support for PE-Private Peripheral Interrupts (PPI), that are handled (enabled/prioritized/delivered) entirely within the CPU interface hardware. To enable PPI interrupts, implement the baseline GICv5 host kernel driver infrastructure required to handle interrupts on a GICv5 system. Add the exception handling code path and definitions for GICv5 instructions. Add GICv5 PPI handling code as a specific IRQ domain to: - Set-up PPI priority - Manage PPI configuration and state - Manage IRQ flow handler - IRQs allocation/free - Hook-up a PPI specific IRQchip to provide the relevant methods PPI IRQ priority is chosen as the minimum allowed priority by the system design (after probing the number of priority bits implemented by the CPU interface). Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-20-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()Nam Cao1-0/+1
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/6d23d93fa1f1e65526698f97c9888fa5d12abc7b.1750860131.git.namcao@linutronix.de
2025-07-03irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()Nam Cao1-0/+1
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/976892e3ce64fcf52387833abee08ddfa47d2a82.1750860131.git.namcao@linutronix.de
2025-07-03irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()Thomas Gleixner1-0/+1
Move away from the legacy MSI domain setup, switch to use msi_create_parent_irq_domain(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/ec08fea004e7c3aa18c3f5657a8cafeb1adfcc1d.1750860131.git.namcao@linutronix.de
2025-06-30irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQNam Cao1-0/+1
irq-msi-lib directly uses struct msi_domain_info and more things which are only available when CONFIG_GENERIC_MSI_IRQ=y. However, there is no dependency specified and CONFIG_IRQ_MSI_LIB can be enabled without CONFIG_GENERIC_MSI_IRQ, which causes the kernel build fail. Make IRQ_MSI_LIB select GENEREIC_MSI_IRQ to prevent that. Fixes: 72e257c6f058 ("irqchip: Provide irq-msi-lib") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/b0c44007f3b7e062228349a2395f8d850050db33.1751277765.git.namcao@linutronix.de Closes: https://lore.kernel.org/oe-kbuild-all/202506282256.cHlEHrdc-lkp@intel.com/
2025-06-26irqchip/thead-c900-aclint-sswi: Generalize aclint-sswi driver and add MIPS ↵Vladimir Kondratiev1-4/+11
P800 support Refactor the Thead specific implementation of the ACLINT-SSWI irqchip: - Rename the source file and related details to reflect the generic nature of the driver - Factor out the generic code that serves both Thead and MIPS variants. This generic part is compliant with the RISC-V draft spec [1] - Provide generic and Thead specific initialization functions Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250612143911.3224046-5-vladimir.kondratiev@mobileye.com Link: https://github.com/riscvarchive/riscv-aclint [1]
2025-05-27Merge tag 'irq-drivers-2025-05-25' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq controller updates from Thomas Gleixner: "Update for interrupt chip drivers: - Convert the generic interrupt chip to lock guards to remove copy & pasta boilerplate code and gotos. - A new driver fot the interrupt controller in the EcoNet EN751221 MIPS SoC. - Extend the SG2042-MSI driver to support the new SG2044 SoC - Updates and cleanups for the (ancient) VT8500 driver - Improve the scalability of the ARM GICV4.1 ITS driver by utilizing node local copies a VM's interrupt translation table when possible. This results in a 12% reduction of VM IPI latency in certain workloads. - The usual cleanups and improvements all over the place" * tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/irq-pruss-intc: Simplify chained interrupt handler setup irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI irqchip/econet-en751221: Switch to of_fwnode_handle() irqchip/irq-vt8500: Switch to irq_domain_create_*() irqchip/econet-en751221: Switch to irq_domain_create_linear() irqchip/irq-vt8500: Use fewer global variables and add error handling irqchip/irq-vt8500: Use a dedicated chained handler function irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller irqchip/irq-vt8500: Drop redundant copy of the device node pointer irqchip/irq-vt8500: Split up ack/mask functions irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack() irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042 irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller genirq/generic-chip: Fix incorrect lock guard conversions genirq/generic-chip: Remove unused lock wrappers irqchip: Convert generic irqchip locking to guards gpio: mvebu: Convert generic irqchip locking to guard() ARM: orion/gpio:: Convert generic irqchip locking to guard() ...
2025-04-16irqchip/irq-bcm2712-mip: Enable driver when ARCH_BCM2835 is enabledPeter Robinson1-2/+2
The BCM2712 MIP driver is required for Raspberry PI5, but it's not automatically enabled when ARCH_BCM2835 is enabled and depends on ARCH_BRCMSTB. ARCH_BCM2835 shares drivers with ARCH_BRCMSTB platforms, but Raspberry PI5 does not require the BRCMSTB specific drivers, which are selected via ARCH_BRCMSTB. Enable the interrupt controller for both ARCH_BRCMSTB and ARCH_BCM2835. [ tglx: Massage changelog ] Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250416082523.179507-1-pbrobinson@gmail.com
2025-04-07irqchip: Add EcoNet EN751221 INTCCaleb James DeLisle1-0/+5
Add a driver for the interrupt controller in the EcoNet EN751221 MIPS SoC. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250330170306.2584136-4-cjd@cjdns.fr
2025-03-29Merge tag 'pci-v6.15-changes' of ↵Linus Torvalds1-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...
2025-03-27Merge tag 'iommu-updates-v6.15' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu updates from Joerg Roedel: "Core iommufd dependencies from Jason: - Change the iommufd fault handle into an always present hwpt handle in the domain - Give iommufd its own SW_MSI implementation along with some IRQ layer rework - Improvements to the handle attach API Core fixes for probe-issues from Robin Intel VT-d changes: - Checking for SVA support in domain allocation and attach paths - Move PCI ATS and PRI configuration into probe paths - Fix a pentential hang on reboot -f - Miscellaneous cleanups AMD-Vi changes: - Support for up to 2k IRQs per PCI device function - Set of smaller fixes ARM-SMMU changes: - SMMUv2 devicetree binding updates for Qualcomm implementations (QCS8300 GPU and MSM8937) - Clean up SMMUv2 runtime PM implementation to help with wider rework of pm_runtime_put_autosuspend() Rockchip driver changes: - Driver adjustments for recent DT probing changes S390 IOMMU changes: - Support for IOMMU passthrough Apple Dart changes: - Driver adjustments to meet ISP device requirements - Null-ptr deref fix - Disable subpage protection for DART 1" * tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits) iommu/vt-d: Fix possible circular locking dependency iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled iommu: apple-dart: fix potential null pointer deref iommu/rockchip: Retire global dma_dev workaround iommu/rockchip: Register in a sensible order iommu/rockchip: Allocate per-device data sensibly iommu/mediatek-v1: Support COMPILE_TEST iommu/amd: Enable support for up to 2K interrupts per function iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro iommu/amd: Replace slab cache allocator with page allocator iommu/amd: Introduce generic function to set multibit feature value iommu: Don't warn prematurely about dodgy probes iommu/arm-smmu: Set rpm auto_suspend once during probe dt-bindings: arm-smmu: Document QCS8300 GPU SMMU iommu: Get DT/ACPI parsing into the proper probe path iommu: Keep dev->iommu state consistent iommu: Resolve ops in iommu_init_device() iommu: Handle race with default domain setup iommu: Unexport iommu_fwspec_free() ...
2025-03-25Merge tag 'irq-drivers-2025-03-23' of ↵Linus Torvalds1-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq driver updates from Thomas Gleixner: - Support for hard indices on RISC-V. The hart index identifies a hart (core) within a specific interrupt domain in RISC-V's Priviledged Architecture. - Rework of the RISC-V MSI driver This moves the driver over to the generic MSI library and solves the affinity problem of unmaskable PCI/MSI controllers. Unmaskable PCI/MSI controllers are prone to lose interrupts when the MSI message is updated to change the affinity because the message write consists of three 32-bit subsequent writes, which update address and data. As these writes are non-atomic versus the device raising an interrupt, the device can observe a half written update and issue an interrupt on the wrong vector. This is mitiated by a carefully orchestrated step by step update and the observation of an eventually pending interrupt on the CPU which issues the update. The algorithm follows the well established method of the X86 MSI driver. - A new driver for the RISC-V Sophgo SG2042 MSI controller - Overhaul of the Renesas RZQ2L driver Simplification of the probe function by using devm_*() mechanisms, which avoid the endless list of error prone gotos in the failure paths. - Expand the Renesas RZV2H driver to support RZ/G3E SoCs - A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to ensure that the addressing is limited to the lower 32-bit of the physical address space. - Add support for the Allwinner AS23 NMI controller - Expand the IMX irqsteer driver to handle up to 960 input interrupts - The usual small updates, cleanups and device tree changes * tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) irqchip/imx-irqsteer: Support up to 960 input interrupts irqchip/sunxi-nmi: Support Allwinner A523 NMI controller dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller irqchip/davinci-cp-intc: Remove public header irqchip/renesas-rzv2h: Add RZ/G3E support irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP} irqchip/renesas-rzv2h: Update TSSR_TIEN macro irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable irqchip/renesas-rzv2h: Use devm_pm_runtime_enable() irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted() irqchip/renesas-rzv2h: Simplify rzv2h_icu_init() irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type() dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC riscv: sophgo: dts: Add msi controller for SG2042 irqchip: Add the Sophgo SG2042 MSI interrupt controller dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI ...
2025-02-26irqchip: Add the Sophgo SG2042 MSI interrupt controllerChen Wang1-0/+12
Add driver for Sophgo SG2042 MSI interrupt controller. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/all/3104216ca90a5f532bafb676c1c5b1efb19e94d1.1740535748.git.unicorn_wang@outlook.com
2025-02-24irqchip: Add Broadcom BCM2712 MSI-X interrupt controllerStanimir Varbanov1-0/+16
Add an interrupt controller driver for MSI-X Interrupt Peripheral (MIP) hardware block found in BCM2712. The interrupt controller is used to handle MSI-X interrupts from peripherials behind PCIe endpoints like RPi1 south bridge found in RPi5. There are two MIPs on BCM2712, the first has 64 consecutive SPIs assigned to 64 output vectors, and the second has 17 SPIs, but only 8 of them are consecutive starting at the 8th output vector. Signed-off-by: Stanimir Varbanov <svarbanov@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20250224083559.47645-4-svarbanov@suse.de [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-02-21irqchip: Have CONFIG_IRQ_MSI_IOMMU be selected by irqchips that need itJason Gunthorpe1-0/+4
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll make more sense for irqchips that call prepare/compose to select it, and that will trigger all the additional code and data to be compiled into the kernel. If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the prepare/compose() will be NOP stubs. If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on the iommu side is compiled out. Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-02-20irqchip/riscv-imsic: Move to common MSI libraryThomas Gleixner1-7/+1
Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select() provided by the common MSI library. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250217085657.789309-4-apatel@ventanamicro.com
2025-01-23irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCIGeert Uytterhoeven1-0/+1
The Microchip LAN966x outband interrupt controller is only present on Microchip LAN966x SoCs, and only used in PCI endpoint mode. Hence add a dependency on MCHP_LAN966X_PCI, to prevent asking the user about this driver when configuring a kernel without Microchip LAN966x PCIe support. Fixes: 3e3a7b35332924c8 ("irqchip: Add support for LAN966x OIC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/all/28e8a605e72ee45e27f0d06b2b71366159a9c782.1737383314.git.geert+renesas@glider.be
2025-01-22Merge tag 'irq-core-2025-01-21' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: - Consolidate the machine_kexec_mask_interrupts() by providing a generic implementation and replacing the copy & pasta orgy in the relevant architectures. - Prevent unconditional operations on interrupt chips during kexec shutdown, which can trigger warnings in certain cases when the underlying interrupt has been shut down before. - Make the enforcement of interrupt handling in interrupt context unconditionally available, so that it actually works for non x86 related interrupt chips. The earlier enablement for ARM GIC chips set the required chip flag, but did not notice that the check was hidden behind a config switch which is not selected by ARM[64]. - Decrapify the handling of deferred interrupt affinity setting. Some interrupt chips require that affinity changes are made from the context of handling an interrupt to avoid certain race conditions. For x86 this was the default, but with interrupt remapping this requirement was lifted and a flag was introduced which tells the core code that affinity changes can be done in any context. Unrestricted affinity changes are the default for the majority of interrupt chips. RISCV has the requirement to add the deferred mode to one of it's interrupt controllers, but with the original implementation this would require to add the any context flag to all other RISC-V interrupt chips. That's backwards, so reverse the logic and require that chips, which need the deferred mode have to be marked accordingly. That avoids chasing the 'sane' chips and marking them. - Add multi-node support to the Loongarch AVEC interrupt controller driver. - The usual tiny cleanups, fixes and improvements all over the place. * tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set() genirq/timings: Add kernel-doc for a function parameter genirq: Remove IRQ_MOVE_PCNTXT and related code x86/apic: Convert to IRQCHIP_MOVE_DEFERRED genirq: Provide IRQCHIP_MOVE_DEFERRED hexagon: Remove GENERIC_PENDING_IRQ leftover ARC: Remove GENERIC_PENDING_IRQ genirq: Remove handle_enforce_irqctx() wrapper genirq: Make handle_enforce_irqctx() unconditionally available irqchip/loongarch-avec: Add multi-nodes topology support irqchip/ts4800: Replace seq_printf() by seq_puts() irqchip/ti-sci-inta : Add module build support irqchip/ti-sci-intr: Add module build support irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown kexec: Consolidate machine_kexec_mask_interrupts() implementation genirq: Reuse irq_thread_fn() for forced thread case genirq: Move irq_thread_fn() further up in the code
2025-01-15irqchip/ti-sci-inta : Add module build supportNicolas Frayer1-1/+2
Add module build support in Kconfig for the TI SCI interrupt aggregator driver. The driver's default build is built-in and it also depends on ARCH_K3 as the driver uses some 64 bit ops and should only be built for 64-bit platforms. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-2-c5e010f58e2c@baylibre.com
2025-01-15irqchip/ti-sci-intr: Add module build supportNicolas Frayer1-1/+2
Add module build support in Kconfig for the TI SCI interrupt router driver. This driver depends on the TI sci firmware driver which aready supports module build. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-1-c5e010f58e2c@baylibre.com
2024-12-03irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when ↵Geert Uytterhoeven1-1/+1
compile-testing Merely enabling compile-testing should not enable additional functionality. Fixes: 0be58e0553812fcb ("irqchip/stm32mp-exti: Allow building as module") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/ef5ec063b23522058f92087e072419ea233acfe9.1733243115.git.geert+renesas@glider.be
2024-11-20Merge tag 'irq-core-2024-11-18' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...
2024-11-07irqchip: Add T-HEAD C900 ACLINT SSWI driverInochi Amaoto1-0/+12
Add a driver for the T-HEAD C900 ACLINT SSWI device. This device allows the system with T-HEAD cpus to send ipi via fast device interface. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241031060859.722258-3-inochiama@gmail.com
2024-11-02irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASKNathan Chancellor1-1/+1
Without SMP enabled (such as in allnoconfig), there is a Kconfig warning because CONFIG_IRQ_EFFECTIVE_AFF_MASK is unconditionally selected by CONFIG_MIPS_GIC: WARNING: unmet direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK Depends on [n]: SMP [=n] Selected by [y]: - MIPS_GIC [=y] Add a dependency on SMP to the selection, which matches all other selections of CONFIG_IRQ_EFFECTIVE_AFF_MASK. Fixes: 322a90638768 ("irqchip/mips-gic: Multi-cluster support") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241101-mips-fix-generic_irq_effective_aff_mask-select-v1-1-d94db6e0de0d@kernel.org
2024-10-30irqchip/mips-gic: Multi-cluster supportPaul Burton1-0/+1
The MIPS I6500 CPU & CM (Coherence Manager) 3.5 introduce the concept of multiple clusters to the system. In these systems, each cluster contains its own GIC, so the GIC isn't truly global any longer. Access to registers in the GICs of remote clusters is possible using a redirect register block much like the redirect register blocks provided by the CM & CPC, and configured through the same GCR_REDIRECT register that mips_cm_lock_other() abstraction builds upon. It is expected that external interrupts are connected identically on all clusters. That is, if there is a device providing an interrupt connected to GIC interrupt pin 0 then it should be connected to pin 0 of every GIC in the system. For the most part, the GIC can be treated as though it is still truly global, so long as interrupts in the cluster are configured properly. Introduce support for such multi-cluster systems in the MIPS GIC irqchip driver. A newly introduced gic_irq_lock_cluster() function allows: 1) Configure access to a GIC in a remote cluster via the redirect register block, using mips_cm_lock_other(). Or: 2) Detect that the interrupt in question is affine to the local cluster and plain old GIC register access to the GIC in the local cluster should be used. It is possible to access the local cluster's GIC registers via the redirect block, but keeping the special case for them is both good for performance (because we avoid the locking & indirection overhead of using the redirect block) and necessary to maintain compatibility with systems using CM revisions prior to 3.5 which don't support the redirect block. The gic_irq_lock_cluster() function relies upon an IRQs effective affinity in order to discover which cluster the IRQ is affine to. In order to track this & allow it to be updated at an appropriate point during gic_set_affinity() select the generic support for effective affinity using CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK. gic_set_affinity() is the one function which gains much complexity. It now deconfigures routing to any VP(E), ie. CPU, on the old cluster when moving affinity to a new cluster. gic_shared_irq_domain_map() moves its update of the IRQs effective affinity to before its use of gic_irq_lock_cluster(), to ensure that operation is on the cluster the IRQ is affine to. The remaining changes are straightforward use of the gic_irq_lock_cluster() function to select between local cluster & remote cluster code-paths when configuring interrupts. Signed-off-by: Paul Burton <paulburton@kernel.org> Signed-off-by: Chao-ying Fu <cfu@wavecomp.com> Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com> Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/all/20241028175935.51250-5-arikalo@gmail.com
2024-10-16irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driverFabrizio Castro1-0/+7
Add driver for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU). This driver supports the external interrupts NMI, IRQn, and TINTn. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241009230817.798582-3-fabrizio.castro.jz@renesas.com
2024-10-02irqchip: Remove obsolete config ARM_GIC_V3_ITS_PCILukas Bulwahn1-7/+0
Commit b5712bf89b4b ("irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]") moves the functionality of irq-gic-v3-its-pci-msi.c into irq-gic-v3-its-msi-parent.c, and drops the former file. With that, the config option ARM_GIC_V3_ITS_PCI is obsolete, but the definition of that config was not removed in the commit above. Remove this obsolete config ARM_GIC_V3_ITS_PCI. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20240926125502.363364-1-lukas.bulwahn@redhat.com
2024-08-20irqchip/loongson-pch-msi: Switch to MSI parent domainsHuacai Chen1-0/+1
Remove the global PCI/MSI irqdomain implementation and provide the required MSI parent functionality by filling in msi_parent_ops, so the PCI/MSI code can detect the new parent and setup per-device MSI domains. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20240815112608.26925-2-zhangtianyang@loongson.cn
2024-07-23Merge tag 'irq-msi-2024-07-22' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ...
2024-07-18irqchip/mvebu-odmi: Switch to parent MSIThomas Gleixner1-0/+1
All platform MSI users and the PCI/MSI code handle per device MSI domains when the irqdomain associated to the device provides MSI parent functionality. Remove the "global" platform domain related code and provide the MSI parent functionality by filling in msi_parent_ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142235.759892514@linutronix.de
2024-07-18irqchip/mvebu-gicp: Switch to MSI parentThomas Gleixner1-0/+1
All platform MSI users and the PCI/MSI code handle per device MSI domains when the irqdomain associated to the device provides MSI parent functionality. Remove the "global" platform domain related code and provide the MSI parent functionality by filling in msi_parent_ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142235.699780279@linutronix.de
2024-07-18irqchip/imx-mu-msi: Switch to MSI parentThomas Gleixner1-0/+1
All platform MSI users and the PCI/MSI code handle per device MSI domains when the irqdomain associated to the device provides MSI parent functionality. Remove the "global" platform domain related code and provide the MSI parent functionality by filling in msi_parent_ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142235.574932935@linutronix.de
2024-07-18irqchip/gic-v2m: Switch to device MSIThomas Gleixner1-0/+1
All platform MSI users and the PCI/MSI code handle per device MSI domains when the irqdomain associated to the device provides MSI parent functionality. Remove the "global" PCI/MSI and platform domain related code and provide the MSI parent functionality by filling in msi_parent_ops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142235.514419280@linutronix.de
2024-07-18irqchip/gic-v3-its: Provide MSI parent infrastructureThomas Gleixner1-0/+1
To support per device MSI domains the ITS must provide MSI parent domain functionality. Provide the basic skeleton for this: - msi_parent_ops - child domain init callback - the MSI parent flag set in irqdomain::flags This does not make ITS a functional parent domain as there is no bit set in the bus_select_mask yet, but it provides the base to implement PCI and platform MSI support gradually on top. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142234.903076277@linutronix.de
2024-07-18irqchip: Provide irq-msi-libThomas Gleixner1-0/+3
All irqdomains which provide MSI parent domain functionality for per device MSI domains need to provide a select() callback for the irqdomain and a function to initialize the child domain. Most of these functions would just be copy&paste with minimal modifications, so provide a library function which implements the required functionality and is customizable via parent_domain::msi_parent_ops. The check for the supported bus tokens in msi_lib_init_dev_msi_info() is expanded step by step within the next patches. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240623142234.840975799@linutronix.de
2024-06-25Revert "irqchip/dw-apb-ictl: Support building as module"Thomas Gleixner1-1/+1
This reverts commit 7cc4f309c933ec5d64eea31066fe86bbf9e48819. Causes build fails. Reported-by: Mark Brown <broonie@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jisheng Zhang <jszhang@kernel.org> https://lore.kernel.org/oe-kbuild-all/202406250214.WZEjWnnU-lkp@intel.com/
2024-06-24irqchip/stm32mp-exti: Allow building as moduleAntonio Borneo1-2/+6
Allow to build the driver as a module by adding the necessarily hooks in Kconfig and in the driver's code. Since all the probe dependencies linked to this driver have already been fixed, remove the not longer relevant 'arch_initcall'. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240620083115.204362-7-antonio.borneo@foss.st.com
2024-06-23irqchip/stm32-exti: Split MCU and MPU codeAntonio Borneo1-1/+2
Keep only the code for ARMv7m STM32 MCUs in in stm32-exti.c and split out the code for ARMv7a & ARMv8a STM32MPxxx MPUs into stm32mp-exti.c Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240620083115.204362-5-antonio.borneo@foss.st.com
2024-06-23irqchip/stm32-exti: Add CONFIG_STM32MP_EXTIAntonio Borneo1-0/+4
To guarantee bisect-ability during the split of stm32-exti in MCU and MPU code, introduce CONFIG_STM32MP_EXTI. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240620083115.204362-2-antonio.borneo@foss.st.com
2024-06-23irqchip/dw-apb-ictl: Support building as moduleJisheng Zhang1-1/+1
The driver is now always built in. In some synaptics ARM64 SoCs it is used as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. Enable it to be built as a module and handle built-in usage correctly, so that it continues working on systems where it is the main interrupt controller. [ tglx: Massage changelog ] Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240614153449.2083-1-jszhang@kernel.org
2024-06-17irqchip: Add support for LAN966x OICHerve Codina1-0/+12
The Microchip LAN966x outband interrupt controller (OIC) maps the internal interrupt sources of the LAN966x device to an external interrupt. When the LAN966x device is used as a PCI device, the external interrupt is routed to the PCI interrupt. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240614173232.1184015-23-herve.codina@bootlin.com
2024-04-09irqchip/loongson: Select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP for ↵Tiezhu Yang1-1/+1
IRQ_LOONGARCH_CPU An interrupt's effective affinity can only be different from its configured affinity if there are multiple CPUs. Make it clear that this option is only meaningful when SMP is enabled. Otherwise, there exists "WARNING: unmet direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK" when make menuconfig if CONFIG_SMP is not set on LoongArch. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240326121130.16622-3-yangtiezhu@loongson.cn
2024-03-25irqchip/riscv-aplic: Add support for MSI-modeAnup Patel1-0/+6
The RISC-V advanced platform-level interrupt controller (APLIC) has two modes of operation: 1) Direct mode and 2) MSI mode. (For more details, refer https://github.com/riscv/riscv-aia) In APLIC MSI-mode, wired interrupts are forwared as message signaled interrupts (MSIs) to CPUs via IMSIC. Extend the existing APLIC irqchip driver to support MSI-mode for RISC-V platforms having both wired interrupts and MSIs. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20240307140307.646078-8-apatel@ventanamicro.com
2024-03-25irqchip: Add RISC-V advanced PLIC driver for direct-modeAnup Patel1-0/+5
The RISC-V advanced interrupt architecture (AIA) specification defines advanced platform-level interrupt controller (APLIC) which has two modes of operation: 1) Direct mode and 2) MSI mode. (For more details, refer https://github.com/riscv/riscv-aia) In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs) as a local external interrupt. Add a platform irqchip driver for the RISC-V APLIC direct-mode to support RISC-V platforms having only wired interrupts. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20240307140307.646078-7-apatel@ventanamicro.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 22:34:15 +0300