summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16ide: remove the legacy ide driverChristoph Hellwig95-38734/+0
The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11m68k/q40: Replace q40ide driver with pata_falcon and falconideFinn Thain4-207/+59
This allows m68k q40 systems to switch from the deprecated IDE subsystem to libata. Enhance the byte-swapping falconide and pata_falcon platform drivers to accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem to co-exist with q40 IRQ arrangements without too much mess. The new IO resources were added solely for the purpose of making request_region() reservations identical to those made by q40ide: these regions aren't used for actual IO. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Richard Zidlicky <rz@linux-m68k.org> Reviewed-and-tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/eefb7e9c2291e09fb4e065ce06bc105f05bb9e06.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-11m68k/mac: Replace macide driver with generic platform driversFinn Thain3-176/+0
This allows m68k mac systems to switch from the deprecated IDE subsystem to libata. This was tested on my Quadra 630. I haven't tested it on my PowerBook 150 because I don't have a RAM adapter board for it. It appears that the hardware I tested doesn't need macide_clear_irq() or macide_test_irq(). If it did, the generic driver would not have worked. It's possible that those routines are needed for the PowerBook 150 but we can cross that bridge if and when we come to it. BTW, macide_clear_irq() appears to suffer from a race condition. The write to the interrupt flags register could have unintended side effects as it may alter other flag bits. Fortunately, all of the other bits are unused by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20 was observed to have no effect on bit 5, so it may be redundant anyway. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Joshua Thompson <funaho@jurai.org> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-01Merge tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+2
Pull ide fix from Jens Axboe: "This is a leftover fix from 5.11, where I forgot to ship it your way" * tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block: ide/falconide: Fix module unload
2021-01-25block: remove unnecessary argument from blk_execute_rqGuoqing Jiang10-12/+12
We can remove 'q' from blk_execute_rq as well after the previous change in blk_execute_rq_nowait. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03ide/falconide: Fix module unloadFinn Thain1-1/+2
Unloading the falconide module results in a crash: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Oops: 00000000 Modules linked in: falconide(-) PC: [<002930b2>] ide_host_remove+0x2e/0x1d2 SR: 2000 SP: 00b49e28 a2: 009b0f90 d0: 00000000 d1: 009b0f90 d2: 00000000 d3: 00b48000 d4: 003cef32 d5: 00299188 a0: 0086d000 a1: 0086d000 Process rmmod (pid: 322, task=009b0f90) Frame format=7 eff addr=00000000 ssw=0505 faddr=00000000 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000000 00018da9 push data: 00000000 00000000 00000000 00000000 Stack from 00b49e90: 004c456a 0027f176 0027cb0a 0027cb9e 00000000 0086d00a 2187d3f0 0027f0e0 00b49ebc 2187d1f6 00000000 00b49ec8 002811e8 0086d000 00b49ef0 0028024c 0086d00a 002800d6 00279a1a 00000001 00000001 0086d00a 2187d3f0 00279a58 00b49f1c 002802e0 0086d00a 2187d3f0 004c456a 0086d00a ef96af74 00000000 2187d3f0 002805d2 800de064 00b49f44 0027f088 2187d3f0 00ac1cf4 2187d3f0 004c43be 2187d3f0 00000000 2187d3f0 800b66a8 00b49f5c 00280776 2187d3f0 Call Trace: [<0027f176>] __device_driver_unlock+0x0/0x48 [<0027cb0a>] device_links_busy+0x0/0x94 [<0027cb9e>] device_links_unbind_consumers+0x0/0x130 [<0027f0e0>] __device_driver_lock+0x0/0x5a [<2187d1f6>] falconide_remove+0x12/0x18 [falconide] [<002811e8>] platform_drv_remove+0x1c/0x28 [<0028024c>] device_release_driver_internal+0x176/0x17c [<002800d6>] device_release_driver_internal+0x0/0x17c [<00279a1a>] get_device+0x0/0x22 [<00279a58>] put_device+0x0/0x18 [<002802e0>] driver_detach+0x56/0x82 [<002805d2>] driver_remove_file+0x0/0x24 [<0027f088>] bus_remove_driver+0x4c/0xa4 [<00280776>] driver_unregister+0x28/0x5a [<00281a00>] platform_driver_unregister+0x12/0x18 [<2187d2a0>] ide_falcon_driver_exit+0x10/0x16 [falconide] [<000764f0>] sys_delete_module+0x110/0x1f2 [<000e83ea>] sys_rename+0x1a/0x1e [<00002e0c>] syscall+0x8/0xc [<00188004>] ext4_multi_mount_protect+0x35a/0x3ce Code: 0029 9188 4bf9 0027 aa1c 283c 003c ef32 <265c> 4a8b 6700 00b8 2043 2028 000c 0280 00ff ff00 6600 0176 40c0 7202 b2b9 004c Disabling lock debugging due to kernel taint This happens because the driver_data pointer is uninitialized. Add the missing platform_set_drvdata() call. For clarity, use the matching platform_get_drvdata() as well. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Fixes: 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers") Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-01Merge tag 'scsi-fixes' of ↵Linus Torvalds3-8/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big core two fixes are for power management ("block: Do not accept any requests while suspended" and "block: Fix a race in the runtime power management code") which finally sorts out the resume problems we've occasionally been having. To make the resume fix, there are seven necessary precursors which effectively renames REQ_PREEMPT to REQ_PM, so every "special" request in block is automatically a power management exempt one. All of the non-PM preempt cases are removed except for the one in the SCSI Parallel Interface (spi) domain validation which is a genuine case where we have to run requests at high priority to validate the bus so this becomes an autopm get/put protected request" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits) scsi: cxgb4i: Fix TLS dependency scsi: ufs: Un-inline ufshcd_vops_device_reset function scsi: ufs: Re-enable WriteBooster after device reset scsi: ufs-mediatek: Use correct path to fix compile error scsi: mpt3sas: Signedness bug in _base_get_diag_triggers() scsi: block: Do not accept any requests while suspended scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE scsi: scsi_transport_spi: Set RQF_PM for domain validation commands scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT scsi: ide: Do not set the RQF_PREEMPT flag for sense requests scsi: block: Introduce BLK_MQ_REQ_PM scsi: block: Fix a race in the runtime power management code scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff() scsi: ufs-pci: Fix restore from S4 for Intel controllers scsi: ufs-mediatek: Keep VCC always-on for specific devices scsi: ufs: Allow regulators being always-on scsi: ufs: Clear UAC for RPMB after ufshcd resets ...
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds2-62/+6
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-15ide: remove BUG_ON(in_interrupt() || irqs_disabled()) from ide_unregister()Sebastian Andrzej Siewior1-3/+0
In the discussion about preempt count consistency across kernel configurations: https://lore.kernel.org/r/20200914204209.256266093@linutronix.de/ it was concluded that the usage of in_interrupt() and related context checks should be removed from non-core code. Both BUG_ON()s in ide-probe.c were introduced in commit 4015c949fb465 ("[PATCH] update ide core") when ide_unregister() was extended with semaphore based locking. Both checks won't complain about disabled preemption which is also wrong. The might_sleep() in today's mutex_lock() will complain about the missuses. Remove the BUG_ON() statements. Link: https://lkml.kernel.org/r/20201120092421.1023428-3-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15ide/falcon: remove in_interrupt() usageSebastian Andrzej Siewior1-2/+0
falconide_get_lock() is called by ide_lock_host() and its caller (ide_issue_rq()) has already a might_sleep() check. stdma_lock() has wait_event() which also has a might_sleep() check. Remove the in_interrupt() check. Link: https://lkml.kernel.org/r/20201113161021.2217361-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-09scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPTBart Van Assche2-2/+2
This is another step that prepares for the removal of RQF_PREEMPT. Link: https://lore.kernel.org/r/20201209052951.16136-5-bvanassche@acm.org Cc: David S. Miller <davem@davemloft.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-09scsi: ide: Do not set the RQF_PREEMPT flag for sense requestsBart Van Assche2-6/+0
RQF_PREEMPT is used for two different purposes in the legacy IDE code: 1. To mark power management requests. 2. To mark requests that should preempt another request. An (old) explanation of that feature is as follows: "The IDE driver in the Linux kernel normally uses a series of busywait delays during its initialization. When the driver executes these busywaits, the kernel does nothing for the duration of the wait. The time spent in these waits could be used for other initialization activities, if they could be run concurrently with these waits. More specifically, busywait-style delays such as udelay() in module init functions inhibit kernel preemption because the Big Kernel Lock is held, while yielding APIs such as schedule_timeout() allow preemption. This is true because the kernel handles the BKL specially and releases and reacquires it across reschedules allowed by the current thread. This IDE-preempt specification requires that the driver eliminate these busywaits and replace them with a mechanism that allows other work to proceed while the IDE driver is initializing." Since I haven't found an implementation of (2), do not set the PREEMPT flag for sense requests. This patch causes sense requests to be postponed while a drive is suspended instead of being submitted to ide_queue_rq(). If it would ever be necessary to restore the IDE PREEMPT functionality, that can be done by introducing a new flag in struct ide_request. Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org Cc: David S. Miller <davem@davemloft.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16ide: switch to __register_blkdev for command set probingChristoph Hellwig1-28/+6
ide is the last user of the blk_register_region framework except for the tracking of allocated gendisk. Switch to __register_blkdev, even if that doesn't allow us to trivially find out which command set to probe for. That means we now always request all modules when a user tries to access an unclaimed ide device node, but except for a few potentially loaded modules for a fringe use case of a deprecated and soon to be removed driver that doesn't make a difference. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16ide: remove ide_{,un}register_regionChristoph Hellwig2-34/+0
There is no need to ever register the fake gendisk used for ide-tape. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds5-61/+14
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-12Merge tag 'm68k-for-v5.10-tag1' of ↵Linus Torvalds2-26/+47
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Conversion of the Mac IDE driver to a platform driver - Minor cleanups and fixes * tag 'm68k-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: ide/macide: Convert Mac IDE driver to platform driver m68k: Replace HTTP links with HTTPS ones m68k: mm: Remove superfluous memblock_alloc*() casts m68k: mm: Use PAGE_ALIGNED() helper m68k: Sort selects in main Kconfig m68k: amiga: Clean up Amiga hardware configuration m68k: Revive _TIF_* masks m68k: Correct some typos in comments m68k: Use get_kernel_nofault() in show_registers() zorro: Fix address space collision message with RAM expansion boards m68k: amiga: Fix Denise detection on OCS
2020-09-28ide/macide: Convert Mac IDE driver to platform driverFinn Thain2-26/+47
Add platform devices for the Mac IDE controller variants. Convert the macide module into a platform driver to support two of those variants. For the third, use a generic "pata_platform" driver instead. This enables automatic loading of the appropriate module and begins the process of replacing the driver with libata alternatives. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Joshua Thompson <funaho@jurai.org> References: commit 5ed0794cde593 ("m68k/atari: Convert Falcon IDE drivers to platform drivers") References: commit 7ad19a99ad431 ("ide: officially deprecated the legacy IDE driver") Link: https://lore.kernel.org/r/edd106dad1bbea32500601c6071f37a9f02a8004.1600901284.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig1-2/+2
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23block: move the NEED_PART_SCAN flag to struct gendiskChristoph Hellwig1-1/+1
We can only scan for partitions on the whole disk, so move the flag from struct block_device to struct gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10ide-gd: stop using the disk events mechanismChristoph Hellwig3-48/+7
ide-gd is only using the disk events mechanism to be able to force an invalidation and partition scan on opening removable media. Just open code the logic without invoving the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10ide-cd: remove idecd_revalidate_diskChristoph Hellwig1-12/+5
Just merge the trivial function into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10ide-cd: use bdev_check_media_changedChristoph Hellwig1-2/+3
Switch to use bdev_check_media_changed instead of check_disk_change and call idecd_revalidate_disk manually. Given that idecd_revalidate_disk only re-reads the TOC, and we already do the same at probe time, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva6-14/+14
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook6-10/+10
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16ide: Remove uninitialized_var() usageKees Cook1-1/+0
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just remove this variable since it was actually unused: drivers/ide/ide-taskfile.c:232:34: warning: unused variable 'flags' [-Wunused-variable] unsigned long uninitialized_var(flags); ^ [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: ce1e518190ea ("ide: don't disable interrupts during kmap_atomic()") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-04ide-cd: rename cdrom_read_tocentryChristoph Hellwig1-7/+7
Give the cdrom_read_tocentry function and ide_ prefix to not conflict with the soon to be added generic function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-04block: add a cdrom_device_info pointer to struct gendiskChristoph Hellwig1-2/+1
Add a pointer to the CDROM information structure to struct gendisk. This will allow various removable media file systems to call directly into the CDROM layer instead of abusing ioctls with kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-22block: move dma_pad handling from blk_rq_map_sg into the callersChristoph Hellwig1-2/+5
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set the dma_pad value in the queue. Move the handling into those callers instead of burdening the common code, and move the ->extra_len field from struct request to struct scsi_cmnd. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-05drivers/ide: Fix build regression.David S. Miller1-1/+1
drivers/ide/ide-scan-pci.c: In function 'ide_scan_pcibus': >> drivers/ide/ide-scan-pci.c:104:13: error: incompatible type for argument 1 of 'list_del' 104 | list_del(d->node); | ~^~~~~~ | | | struct list_head In file included from include/linux/module.h:12, from drivers/ide/ide-scan-pci.c:12: include/linux/list.h:144:47: note: expected 'struct list_head *' but argument is of type 'struct list_head' 144 | static inline void list_del(struct list_head *entry) | ~~~~~~~~~~~~~~~~~~^~~~~ Fixes: 6a0033457f23 ("drivers/ide: convert to list_for_each_entry_safe()") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03drivers/ide: convert to list_for_each_entry_safe()chenqiwu1-5/+3
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge tag 'v5.6' into mips-nextThomas Bogendoerfer1-1/+1
Linux 5.6
2020-03-24ide: remove no longer used au1xxx-ide driverBartlomiej Zolnierkiewicz3-618/+1
Commit 54ff4a1d1732 ("MIPS: Alchemy: pata_platform for DB1200") from year 2014 converted the only user of au1xxx-ide IDE host driver (MIPS Alchemy DB1200 platform) to use pata_platform libata host driver instead. This patch removes dead au1xxx-ide driver code. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-02-24scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four ↵Adam Williamson1-1/+1
appropriate places Arnd Bergmann inadvertently typoed these in d320a9551e394 and 64cbfa96551a; they seem to be the cause of https://bugzilla.redhat.com/show_bug.cgi?id=1801353 , invalid SCSI commands when udev tries to query a DVD drive. [arnd] Found another instance of the same bug, also introduced in my compat_ioctl series. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801353 Link: https://lore.kernel.org/r/20200219165139.3467320-1-arnd@arndb.de Fixes: c103d6ee69f9 ("compat_ioctl: ide: floppy: add handler") Fixes: 64cbfa96551a ("compat_ioctl: move cdrom commands into cdrom.c") Fixes: d320a9551e39 ("compat_ioctl: scsi: move ioctl handling into drivers") Bisected-by: Chris Murphy <bugzilla@colorremedies.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-10/+9
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds11-13/+16
Pull IDE updates from David Miller: 1) Fix mem region name in tx4949ide driver, from Christophe JAILLET. 2) Make drive->dn read only, it should not be changeable by users. From Dan Carpenter. 3) Several cast fixups from Krzysztof Kozlowski. There is also going to be a removal of a now unused IDE driver, but that will come via the MIPS tree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: make drive->dn read only ide: serverworks: potential overflow in svwks_set_pio_mode() cmd64x: potential buffer overflow in cmd64x_program_timings() ide: remove unneeded header include path to drivers/ide ide: qd65xx: Fix cast to pointer from integer of different size ide: ht6560b: Fix cast to pointer from integer of different size ide: remove set but not used variable 'hwif' ide: remove unnecessary touch_softlockup_watchdog ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' call ide: Use dev_get_drvdata where possible
2020-01-30ide: make drive->dn read onlyDan Carpenter1-1/+1
The IDE core always sets ->dn correctly so changing it is never required. Setting it to a different value than assigned by IDE core is very likely to result in data corruption (due to wrong transfer timings being set on the controller etc.) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: serverworks: potential overflow in svwks_set_pio_mode()Dan Carpenter1-0/+6
The "drive->dn" variable is a u8 controlled by root. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20cmd64x: potential buffer overflow in cmd64x_program_timings()Dan Carpenter1-0/+3
The "drive->dn" value is a u8 and it is controlled by root only, but it could be out of bounds here so let's check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: remove unneeded header include path to drivers/ideMasahiro Yamada1-2/+0
I can build drivers/ide/ without this. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: qd65xx: Fix cast to pointer from integer of different sizeKrzysztof Kozlowski1-1/+1
Integer passed as pointer to drvdata should be cast to unsigned long to avoid warning (compile testing on alpha architecture): drivers/ide/qd65xx.c: In function ‘qd6580_init_dev’: drivers/ide/qd65xx.c:312:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: ht6560b: Fix cast to pointer from integer of different sizeKrzysztof Kozlowski1-1/+1
Integer passed as pointer to drvdata should be cast to unsigned long to avoid warning (compile testing on alpha architecture): drivers/ide/ht6560b.c: In function ‘ht6560b_init_dev’: drivers/ide/ht6560b.c:318:27: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: remove set but not used variable 'hwif'Wang Hai1-2/+1
Fix the following gcc warning: drivers/ide/pmac.c: In function pmac_ide_setup_device: drivers/ide/pmac.c:1027:14: warning: variable hwif set but not used [-Wunused-but-set-variable] Fixes: d58b0c39e32f ("powerpc/macio: Rework hotplug media bay support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: remove unnecessary touch_softlockup_watchdogGuoqing Jiang1-1/+0
Call touch_softlockup_watchdog before touch_nmi_watchdog is not needed, since touch_softlockup_watchdog is called inside touch_nmi_watchdog. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' callChristophe JAILLET1-1/+1
This should be "tx4939ide" instead of "tx4938ide", but here MODNAME is even better. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03compat_ioctl: move HDIO ioctl handling into drivers/ideArnd Bergmann5-27/+54
Most of the HDIO ioctls are only used by the obsolete drivers/ide subsystem, these can be handled by changing ide_cmd_ioctl() to be aware of compat mode and doing the correct transformations in place and using it as both native and compat handlers for all drivers. The SCSI drivers implementing the same commands are already doing this in the drivers, so the compat_blkdev_driver_ioctl() function is no longer needed now. The BLKSECTSET and HDIO_GETGEO_BIG ioctls are not implemented in any driver any more and no longer need any conversion. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: move cdrom commands into cdrom.cArnd Bergmann1-0/+37
There is no need for the special cases for the cdrom ioctls any more now, so make sure that each cdrom driver has a .compat_ioctl() callback and calls cdrom_compat_ioctl() directly there. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-03compat_ioctl: ide: floppy: add handlerArnd Bergmann4-0/+59
Rather than relying on fs/compat_ioctl.c, this adds support for a compat_ioctl() callback in the ide-floppy driver directly, which lets it translate the scsi commands. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-12-02Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-6/+21
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-26Merge tag 'printk-for-5.5' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 13:04:47 +0300