summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2025-06-18Merge tag 'drm-msm-fixes-2025-06-16' of ↵Dave Airlie19-67/+217
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.16-rc3 Display: - Fixed DP output on SDM845 - Fixed 10nm DSI PLL init GPU: - SUBMIT ioctl error path leak fixes - drm half of stall-on-fault fixes. Note there is a soft dependency, to get correct mmu fault devcoredumps, on arm-smmu changes which are not in this branch, but have already been merged by Linus. So by the time Linus merges this, everything should be peachy. - a7xx: Missing CP_RESET_CONTEXT_STATE - Skip GPU component bind if GPU is not in the device table. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://lore.kernel.org/r/CACSVV03=OH74ip8O1xqb8RJWGyM4HFuUnWuR=p3zJR+-ko_AJA@mail.gmail.com
2025-06-14drm/msm: Fix inverted WARN_ON() logicRob Clark1-1/+1
We want to WARN_ON() if info is NULL. Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Fixes: 0838fc3e6718 ("drm/msm/adreno: Check for recognized GPU before bind") Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reported-by: Alexey Klimov <alexey.klimov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/658631/
2025-06-10drm/msm/adreno: Check for recognized GPU before bindRob Clark3-6/+26
If we have a newer dtb than kernel, we could end up in a situation where the GPU device is present in the dtb, but not in the drivers device table. We don't want this to prevent the display from probing. So check that we recognize the GPU before adding the GPU component. v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657701/
2025-06-09drm/msm/adreno: Pass device_node to find_chipid()Rob Clark1-5/+5
We are going to want to re-use this before the component is bound, when we don't yet have the device pointer (but we do have the of node). v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657705/
2025-06-09drm/msm: Rename add_components_mdp()Rob Clark1-2/+2
To better match add_gpu_components(). Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657700/
2025-06-09drivers: gpu: drm: msm: registers: improve reproducibilityRyan Eatmon1-3/+5
The files generated by gen_header.py capture the source path to the input files and the date. While that can be informative, it varies based on where and when the kernel was built as the full path is captured. Since all of the files that this tool is run on is under the drivers directory, this modifies the application to strip all of the path before drivers. Additionally it prints <stripped> instead of the date. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Viswanath Kraleti <viswanath.kraleti@oss.qualcomm.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/655599/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm/a7xx: Call CP_RESET_CONTEXT_STATEConnor Abbott1-0/+14
Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654924/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix CP_RESET_CONTEXT_STATE bitfield namesConnor Abbott1-1/+2
Based on kgsl. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654922/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Temporarily disable stall-on-fault after a page faultConnor Abbott9-1/+116
When things go wrong, the GPU is capable of quickly generating millions of faulting translation requests per second. When that happens, in the stall-on-fault model each access will stall until it wins the race to signal the fault and then the RESUME register is written. This slows processing page faults to a crawl as the GPU can generate faults much faster than the CPU can acknowledge them. It also means that all available resources in the SMMU are saturated waiting for the stalled transactions, so that other transactions such as transactions generated by the GMU, which shares translation resources with the GPU, cannot proceed. This causes a GMU watchdog timeout, which leads to a failed reset because GX cannot collapse when there is a transaction pending and a permanently hung GPU. On older platforms with qcom,smmu-v2, it seems that when one transaction is stalled subsequent faulting transactions are terminated, which avoids this problem, but the MMU-500 follows the spec here. To work around these problems, disable stall-on-fault as soon as we get a page fault until a cooldown period after pagefaults stop. This allows the GMU some guaranteed time to continue working. We only use stall-on-fault to halt the GPU while we collect a devcoredump and we always terminate the transaction afterward, so it's fine to miss some subsequent page faults. We also keep it disabled so long as the current devcoredump hasn't been deleted, because in that case we likely won't capture another one if there's a fault. After this commit HFI messages still occasionally time out, because the crashdump handler doesn't run fast enough to let the GMU resume, but the driver seems to recover from it. This will probably go away after the HFI timeout is increased. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654891/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Delete resume_translation()Connor Abbott3-19/+0
Unused since the previous commit. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654890/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Don't use a worker to capture fault devcoredumpConnor Abbott3-31/+19
Now that we use a threaded IRQ, it should be safe to do this in the fault handler. We can also remove fault_info from struct msm_gpu and just pass it directly. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654889/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix another leak in the submit error pathRob Clark1-2/+6
put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix a fence leak in submit error pathRob Clark1-0/+9
In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rateKrzysztof Kozlowski1-0/+7
Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-09drm/msm/disp: Correct porch timing for SDM845James A. MacInnes1-5/+9
Type-C DisplayPort inoperable due to incorrect porch settings. - Re-used wide_bus_en as flag to prevent porch shifting Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/636945/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-2-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-09drm/msm/dp: Disable wide bus support for SDM845James A. MacInnes1-1/+6
When widebus was enabled for DisplayPort in commit c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") it was clarified that it is only supported on DPU 5.0.0 onwards which includes SC7180 on DPU revision 6.2. However, this patch missed that the description structure for SC7180 is also reused for SDM845 (because of identical io_start address) which is only DPU 4.0.0, leading to a wrongly enbled widebus feature and corruption on that platform. Create a separate msm_dp_desc_sdm845 structure for this SoC compatible, with the wide_bus_supported flag turned off. Fixes: c7c412202623 ("drm/msm/dp: enable widebus on all relevant chipsets") Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com> [DB: reworded commit text following Marijn's suggestion] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636944/ Link: https://lore.kernel.org/r/20250212-sdm845_dp-v2-1-4954e51458f4@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar4-5/+7
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-28Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds88-1024/+1462
Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...
2025-05-27Merge tag 'irq-cleanups-2025-05-25' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Thomas Gleixner: "A set of cleanups for the generic interrupt subsystem: - Consolidate on one set of functions for the interrupt domain code to get rid of pointlessly duplicated code with only marginal different semantics. - Update the documentation accordingly and consolidate the coding style of the irqdomain header" * tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) irqdomain: Consolidate coding style irqdomain: Fix kernel-doc and add it to Documentation Documentation: irqdomain: Update it Documentation: irq-domain.rst: Simple improvements Documentation: irq/concepts: Minor improvements Documentation: irq/concepts: Add commas and reflow irqdomain: Improve kernel-docs of functions irqdomain: Make struct irq_domain_info variables const irqdomain: Use irq_domain_instantiate()'s return value as initializers irqdomain: Drop irq_linear_revmap() pinctrl: keembay: Switch to irq_find_mapping() irqchip/armada-370-xp: Switch to irq_find_mapping() gpu: ipu-v3: Switch to irq_find_mapping() gpio: idt3243x: Switch to irq_find_mapping() sh: Switch to irq_find_mapping() powerpc: Switch to irq_find_mapping() irqdomain: Drop irq_domain_add_*() functions powerpc: Switch irq_domain_add_nomap() to use fwnode thermal: Switch to irq_domain_create_linear() soc: Switch to irq_domain_create_*() ...
2025-05-16gpu: Switch to irq_domain_create_linear()Jiri Slaby (SUSE)1-1/+1
irq_domain_add_linear() is going away as being obsolete now. Switch to the preferred irq_domain_create_linear(). That differs in the first parameter: It takes more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250319092951.37667-19-jirislaby@kernel.org
2025-05-12drm/msm/dp: Introduce link training per-segment for LTTPRsAleksandrs Vinarskis1-37/+89
DisplayPort requires per-segment link training when LTTPR are switched to non-transparent mode, starting with LTTPR closest to the source. Only when each segment is trained individually, source can link train to sink. Implement per-segment link traning when LTTPR(s) are detected, to support external docking stations. On higher level, changes are: * Pass phy being trained down to all required helpers * Run CR, EQ link training per phy * Set voltage swing, pre-emphasis levels per phy Since at least some LTTPRs (eg. Parade PS8830) do not correctly report voltage-swing, pre-emphasis level 3 support, always assume level 3 is supported. This is permitted under DP 2.1(a) section 3.6.7.2 stating that LTTPR shall set its transmitter levels as close as possible to those requested by the DPTX, if the DPTX sets the voltage swing or pre-emphasis to a level that the LTTPR does not support. It shall be noted that LTTPR’s level choosing is implementation-specific. This ensures successful link training both when connected directly to the monitor (single LTTPR onboard most X1E laptops) and via the docking station (at least two LTTPRs). Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/652305/ Link: https://lore.kernel.org/r/20250507230113.14270-5-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Prepare for link training per-segment for LTTPRsAleksandrs Vinarskis2-6/+12
Per-segment link training requires knowing the number of LTTPRs (if any) present. Store the count during LTTPRs' initialization. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652306/ Link: https://lore.kernel.org/r/20250507230113.14270-4-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Account for LTTPRs capabilitiesAleksandrs Vinarskis3-4/+16
Take into account LTTPR capabilities when selecting maximum allowed link rate, number of data lines. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652302/ Link: https://lore.kernel.org/r/20250507230113.14270-3-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dp: Fix support of LTTPR initializationAleksandrs Vinarskis1-4/+9
Initialize LTTPR before msm_dp_panel_read_sink_caps, as DPTX shall (re)read DPRX caps after LTTPR detection, as required by DP 2.1a, Section 3.6.7.6.1. Fixes: 72d0af4accd9 ("drm/msm/dp: Add support for LTTPR handling") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # SA8775P Tested-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/652301/ Link: https://lore.kernel.org/r/20250507230113.14270-2-alex.vinarskis@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from SAR2130P CTL blocksDmitry Baryshkov1-3/+2
Follow the changes in the commit a2649952f66e ("drm/msm/dpu: remove DPU_CTL_SPLIT_DISPLAY from CTL blocks on DPU >= 5.0") and remove DPU_CTL_SPLIT_DISPLAY from the CTL blocks on the SAR2130P platform. Single CTL is used for all interfaces used by a single path Fixes: 178575173472 ("drm/msm/dpu: add catalog entry for SAR2130P") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651883/ Link: https://lore.kernel.org/r/20250506-dpu-sar2130p-no-split-display-v1-1-b619c0fddea5@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add handling of LM_6 and LM_7 bits in pending flush maskKrzysztof Kozlowski1-0/+6
MDSS/MDP v12 comes with new bits in flush registers (e.g. MDP_CTL_0_FLUSH) for Layer Mixer 6 and 7. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651260/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-13-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add LM_7, DSC_[67], PP_[67] and MERGE_3D_5Krzysztof Kozlowski1-0/+6
Add IDs for new blocks present in MDSS/MDP v12 for LM, DSC, PINGPONG and MERGE_3D blocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651262/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-12-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Drop useless commentsKrzysztof Kozlowski1-8/+0
Drop comments about SoC before each 'struct dpu_lm_sub_blks' for given SoC because it's duplicating the actual name of structure. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651251/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-11-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE before blend setupKrzysztof Kozlowski1-0/+2
Before blend setup, all existing blend stages are cleared, so shall be active fetch pipes. Fixes: b3652e87c03c ("drm/msm/disp/dpu1: add support to program fetch active in ctl path") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651263/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-10-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on ctl_path resetKrzysztof Kozlowski1-0/+3
Resetting entire CTL path should also include resetting active fetch pipes. Fixes: e1a950eec256 ("drm/msm/dpu: add reset_intf_cfg operation for dpu_hw_ctl") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651252/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-9-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Clear CTL_FETCH_PIPE_ACTIVE on mixer resetKrzysztof Kozlowski1-0/+3
Resetting mixers should also include resetting active fetch pipes. Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651246/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-8-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/dpu: Add missing "fetch" name to set_active_pipes()Krzysztof Kozlowski3-10/+10
The set_active_pipes() callback configures CTL_FETCH_PIPE_ACTIVE and newer DPU v12.0 comes with CTL_PIPE_ACTIVE, thus rename it to set_active_fetch_pipes() to better match the purpose. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651261/ Link: https://lore.kernel.org/r/20250430-b4-sm8750-display-v5-7-8cab30c3e4df@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: wire in hpd_enable/hpd_disable bridge opsDmitry Baryshkov4-17/+10
The HDMI driver already has msm_hdmi_hpd_enable() and msm_hdmi_hpd_disable() functions. Wire them into the msm_hdmi_bridge_funcs, so that HPD can be enabled and disabled dynamically rather than always having HPD events generation enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-13-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: ensure that HDMI is up if HPD is requestedDmitry Baryshkov4-2/+18
The HDMI block needs to be enabled to properly generate HPD events. Make sure it is not turned off in the disable paths if HPD delivery is enabled. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651722/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-12-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: expand the HDMI_CFG macroDmitry Baryshkov2-9/+9
Expand the HDMI_CFG() macro in HDMI config description. It has no added value other than hiding some boilerplate declarations. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651724/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-11-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: rename hpd_clks to pwr_clksDmitry Baryshkov2-16/+16
As these clocks are now used in the runtime PM callbacks, they have no connection to 'HPD'. Rename corresponding fields to follow clocks purpose, to power up the HDMI controller. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651720/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-10-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: implement proper runtime PM handlingDmitry Baryshkov4-74/+47
It is completely not obvious, but the so-called 'hpd' clocks and regulators are required for the HDMI host to function properly. Merge pwr and hpd regulators. Use regulators, clocks and pinctrl to implement proper runtime PM callbacks. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651715/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-9-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: add runtime PM calls to DDC transfer functionDmitry Baryshkov1-2/+12
We must be sure that the HDMI controller is powered on, while performing the DDC transfer. Add corresponding runtime PM calls to msm_hdmi_i2c_xfer(). Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651727/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-8-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to pm_runtime_resume_and_get()Dmitry Baryshkov3-4/+16
The pm_runtime_get_sync() function is a bad choise for runtime power management. Switch HDMI driver to pm_runtime_resume_and_get() and add proper error handling, while we are at it. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651713/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: switch to clk_bulk APIDmitry Baryshkov3-37/+19
The last platform using legacy clock names for HDMI block (APQ8064) switched to new clock names in 5.16. It's time to stop caring about old DT, drop hand-coded helpers and switch to clk_bulk_* API. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651716/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-6-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: drop clock frequency assignmentDmitry Baryshkov3-12/+0
The only clock which has frequency being set through hpd_freqs is the "core" aka MDSS_HDMI_CLK clock. It always has the specified frequency, so we can drop corresponding clk_set_rate() call together with the hpd_freq infrastructure. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651717/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-5-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: simplify extp clock handlingDmitry Baryshkov3-45/+18
With the extp being the only "power" clock left, remove the surrounding loops and handle the extp clock directly. Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651710/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-4-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: move the alt_iface clock to the hpd listDmitry Baryshkov1-3/+3
According to the vendor kernel [1] , the alt_iface clock should be enabled together with the rest of HPD clocks, to make HPD to work properly. [1] https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/e07a5487e521e57f76083c0a6e2f995414ac6d03 Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/651709/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-3-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-12drm/msm/hdmi: convert clock and regulator arrays to const arraysDmitry Baryshkov2-9/+9
As a preparation to the next patches convert 'static const char *' arrays to 'static const char * const', as required by the checkpatch.pl Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/651705/ Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-2-48541f76318c@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-05-10drm/msm/adreno: Remove MODULE_FIRMWARE()'sRob Clark5-33/+0
The driver handles the case where gpu fw is not in the initrd. OTOH it doesn't always handle the case where _some_ fw is in the initrd, but others are not. In particular the zap fw tends to be signed with an OEM specific key, so the paths/names differ across devices with the same SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE(). So MODULE_FIRMWARE() just ends up causing problems without actually solving anything. Remove them! Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/652195/
2025-05-10drm/msm/a6xx: Disable rgb565_predicator on Adreno 7c3Konrad Dybcio1-1/+0
This feature is supposed to be enabled with UBWC v4 or later. Implementations of this SKU feature an effective UBWC version of 3, so disable it, in line with the BSP kernel. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Fixes: 192f4ee3e408 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu") Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/651759/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/adreno: Add module param to disable ACDAkhil P Oommen2-0/+11
Add a module param to disable ACD which will help to quickly rule it out for any GPU issues. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/649349/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm: a6x: Rework qmp_get() error handlingAkhil P Oommen1-2/+3
Fix the following for qmp_get() errors: 1. Correctly handle probe defer for A6x GPUs 2. Ignore other errors because those are okay when GPU ACD is not required. They are checked again during gpu acd probe. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Patchwork: https://patchwork.freedesktop.org/patch/649346/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/a6xx: Increase HFI response timeoutAkhil P Oommen1-1/+1
When ACD feature is enabled, it triggers some internal calibrations which result in a pretty long delay during the first HFI perf vote. So, increase the HFI response timeout to match the downstream driver. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Patchwork: https://patchwork.freedesktop.org/patch/649344/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2025-05-04drm/msm/adreno: Add support for ACDAkhil P Oommen4-10/+132
ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce the power consumption. In some chipsets, it is also a requirement to support higher GPU frequencies. This patch adds support for GPU ACD by sending necessary data to GMU and AOSS. The feature support for the chipset is detected based on devicetree data. Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Tested-by: Maya Matuszczyk <maccraft123mc@gmail.com> Tested-by: Anthony Ruhier <aruhier@mailbox.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/649342/ Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-07-03 21:58:23 +0300