summaryrefslogtreecommitdiff
path: root/drivers/edac/synopsys_edac.c
AgeCommit message (Collapse)AuthorFilesLines
2024-08-01EDAC/synopsys: Fix error injection on Zynq UltraScale+Shubhrajyoti Datta1-1/+34
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB. The DDR host interface has a contiguous memory so while injecting errors, the driver should remove the hole else the injection fails as the address translation is incorrect. Introduce a get_mem_info() function pointer and set it for Zynq UltraScale+ platform to return host address. Fixes: 1a81361f75d8 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
2024-05-06EDAC/synopsys: Fix ECC status and IRQ control race conditionSerge Semin1-13/+37
The race condition around the ECCCLR register access happens in the IRQ disable method called in the device remove() procedure and in the ECC IRQ handler: 1. Enable IRQ: a. ECCCLR = EN_CE | EN_UE 2. Disable IRQ: a. ECCCLR = 0 3. IRQ handler: a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT b. ECCCLR = 0 c. ECCCLR = EN_CE | EN_UE So if the IRQ disabling procedure is called concurrently with the IRQ handler method the IRQ might be actually left enabled due to the statement 3c. The root cause of the problem is that ECCCLR register (which since v3.10a has been called as ECCCTL) has intermixed ECC status data clear flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN flags) and handling (write 1 to clear ECC status data) procedures must be serialised around the ECCCTL register modification to prevent the race. So fix the problem described above by adding the spin-lock around the ECCCLR modifications and preventing the IRQ-handler from modifying the IRQs enable flags (there is no point in disabling the IRQ and then re-enabling it again within a single IRQ handler call, see the statements 3a/3b and 3c above). Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
2024-01-23EDAC/synopsys: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230704101811.49637-3-frank.li@vivo.com
2023-11-21EDAC/synopsys: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231004131254.2673842-19-u.kleine-koenig@pengutronix.de
2023-08-28EDAC: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174434.4054728-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-07-22EDAC/synopsys: Re-enable the error interrupts on v3 hwSherry Sun1-22/+25
zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after an interrupt for a {un-,}correctable error is raised, which disables the error interrupts. Then the interrupt handler will be called only once. Therefore, re-enable the error interrupt line at the end of intr_handler() for v3.x Synopsys EDAC DDR. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com
2022-07-22EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hwSherry Sun1-2/+5
v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the ECC Clear Register to disable the error interrupts instead. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com
2022-05-24Merge tag 'edac_updates_for_v5.19_rc1' of ↵Linus Torvalds1-14/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Switch ghes_edac to use the CPER error reporting routines and simplify the code considerably this way - Rip out the silly edac_align_ptr() contraption which was computing the size of the private structures of each driver and thus allowing for a one-shot memory allocation. This was clearly unnecessary and confusing so switch to simple and boring kmalloc* calls. - Last but not least, the usual garden variety of fixes, cleanups and improvements all over EDAC land * tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix typo processsors -> processors EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id() EDAC: Use kcalloc() EDAC/ghes: Change ghes_hw from global to static EDAC/armada_xp: Use devm_platform_ioremap_resource() EDAC/synopsys: Add a SPDX identifier EDAC/synopsys: Add driver support for i.MX platforms EDAC/dmc520: Don't print an error for each unconfigured interrupt line EDAC/mc: Get rid of edac_align_ptr() EDAC/device: Sanitize edac_device_alloc_ctl_info() definition EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info() EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info() EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc() efi/cper: Reformat CPER memory error location to more readable EDAC/ghes: Unify CPER memory error location reporting efi/cper: Add a cper_mem_err_status_str() to decode error description powerpc/85xx: Remove fsl,85... bindings
2022-04-28EDAC/synopsys: Add a SPDX identifierShubhrajyoti Datta1-14/+1
Replace the copyright boilerplate with a SPDX identifier. [ bp: Rewrite commit message. ] Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220428044051.2842687-1-shubhrajyoti.datta@xilinx.com
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta1-5/+11
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
2021-11-20EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDRDinh Nguyen1-7/+42
Add support for version 3.80a of the Synopsys DDR controller. This version of the controller has the following differences: - UE/CE are auto cleared - Interrupts are supported by default Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lkml.kernel.org/r/20211012190709.1504152-2-dinguyen@kernel.org
2021-11-20EDAC/synopsys: Use the quirk for version instead of ddr versionDinh Nguyen1-2/+1
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that quirk to determine a call to setup_address_map(). Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org
2021-09-16EDAC/synopsys: Fix wrong value type assignment for edac_modeSai Krishna Potthuri1-1/+1
dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com
2020-11-18EDAC/synopsys: Return the correct value in mc_probe()Zhang Xiaoxu1-1/+2
Return the error value if the inject sysfs file creation fails, rather than returning 0, to signal to the upper layer that the ->probe function failed. [ bp: Massage. ] Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Link: https://lkml.kernel.org/r/20201116135810.3130845-1-zhangxiaoxu5@huawei.com
2020-03-17EDAC/synopsys: Do not dump uninitialized pinf->colSherry Sun1-11/+11
On the ZynqMP platform, zynqmp_get_error_info() is used to read out error information. In this function, the pinf->col parameter is not used (it is only used by the Zynq platform's zynq_get_error_info()). So there's no need to print pinf->col on ZynqMP. In order to differentiate on which platform handle_error() is executed, use DDR_ECC_INTR_SUPPORT as the check condition to distinguish between Zynq and ZynqMP platforms. [ bp: Massage. ] Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Manish Narani <manish.narani@xilinx.com> Link: https://lkml.kernel.org/r/1584365679-27443-1-git-send-email-sherry.sun@nxp.com
2020-02-27EDAC/synopsys: Do not print an error with back-to-back snprintf() callsSherry Sun1-15/+7
handle_error() currently calls snprintf() a couple of times in succession to output the message for a CE/UE, therefore overwriting each part of the message which was formatted with the previous snprintf() call. As a result, only the part of the message from the last snprintf() call will be printed. The simplest and most effective way to fix this problem is to combine the whole string into one which to supply to a single snprintf() call. [ bp: Massage. ] Fixes: b500b4a029d57 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Cc: Manish Narani <manish.narani@xilinx.com> Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
2018-11-06EDAC, synopsys: Add Error Injection support for ZynqMP DDR controllerManish Narani1-7/+413
Add support for Error Injection for ZynqMP DDR controller IP. For injecting errors, the Row, Column, Bank, Bank Group and Rank bits positions are determined via Address Map registers of the Synopsys DDR controller. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-7-git-send-email-manish.narani@xilinx.com
2018-11-06EDAC, synopsys: Add ECC support for ZynqMP DDR controllerManish Narani1-17/+305
Add ECC support for ZynqMP DDR controller IP. The IP supports interrupts for corrected and uncorrected errors. Add interrupt handlers for the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-5-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Add macro defines for ZynqMP DDRCManish Narani1-0/+168
Add macro defines for ZynqMP DDR controller. These macros will be used for ZynqMP ECC operations. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-4-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Add error handling for the of_device_get_match_data() resultManish Narani1-0/+3
The function of_device_get_match_data() can return NULL in case of error. Add error handling for the same in the mc_probe() function. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1540447621-22870-2-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Add platform specific structures for the DDR ControllerManish Narani1-23/+63
Add platform specific structures so that different IP support can be added later using quirks. [ bp: fix function names. ] Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1538667328-9465-6-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Return void for functions always returning 0Manish Narani1-18/+4
The current driver has functions which are always returning 0 - make them return void instead. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1538667328-9465-5-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Correct commentsManish Narani1-53/+51
Spellcheck and improve/correct comments. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: michal.simek@xilinx.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1538667328-9465-4-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Shorten static function namesManish Narani1-41/+38
Shorten static function names, remove the unnecessary 'synps_' prefix in function names. [ bp: Drop the "edac_" prefix too as that prefix is reserved for EDAC core functions. ] Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: mark.rutland@arm.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1538667328-9465-3-git-send-email-manish.narani@xilinx.com
2018-11-05EDAC, synopsys: Improve code readabilityManish Narani1-52/+52
Clean up the driver code. Update the debug messages for EDAC errors reported. Increase the indentation of the macros for better readability. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Michal Simek <michal.simek@xilinx.com> CC: amit.kucheria@linaro.org CC: devicetree@vger.kernel.org CC: leoyang.li@nxp.com CC: linux-arm-kernel@lists.infradead.org CC: linux-edac <linux-edac@vger.kernel.org> CC: manish.narani@xilinx.com CC: mark.rutland@arm.com CC: mchehab@kernel.org CC: michal.simek@xilinx.com CC: robh+dt@kernel.org CC: sudeep.holla@arm.com Link: http://lkml.kernel.org/r/1538667328-9465-2-git-send-email-manish.narani@xilinx.com
2017-07-17EDAC: Get rid of mci->mod_verBorislav Petkov1-1/+0
It is a write-only variable so get rid of it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Loc Ho <lho@apm.com> Cc: linux-edac@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org
2016-12-15edac: rename edac_core.h to edac_mc.hMauro Carvalho Chehab1-1/+1
Now, all left at edac_core.h are at drivers/edac/edac_mc.c, so rename it to edac_mc.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2015-03-20EDAC: Constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. See driver.of_match_table and open firmware functions. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Robert Richter <rric@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Johannes Thumshirn <johannes.thumshirn@men.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-edac@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1426535685-25996-10-git-send-email-fabf@skynet.be Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-07EDAC, synps: Add EDAC support for zynq ddr ecc controllerPunnaiah Choudary Kalluri1-0/+535
Add EDAC support for ecc errors reporting on the synopsys ddr controller. The ddr ecc controller corrects single bit errors and detects double bit errors. Selected important-ish notes from the changelog: - I have not taken care of spliting synps_edac_geterror_info function as it adds additional indentation levels and moreover the existing changes were made as part of the v2 review comments - Removed dt binding info as already there is a binding info available under memorycontroller. so, updated ecc info there. - Shortened the prefix "sysnopsys" to "synps" Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Link: http://lkml.kernel.org/r/a728a8d4678f4dbf9de189a480297c3d@BY2FFO11FD034.protection.gbl [ Boris: massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 02:29:55 +0300