Age | Commit message (Expand) | Author | Files | Lines |
2019-07-31 | Bluetooth: hci_uart: check for missing tty operations | Vladis Dronov | 1 | -0/+3 |
2019-05-30 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 | Thomas Gleixner | 1 | -16/+1 |
2019-04-23 | Bluetooth: hci_bcm: Fix empty regulator supplies for Intel Macs | Chen-Yu Tsai | 1 | -4/+16 |
2018-12-19 | Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading | Jonathan Bakker | 1 | -0/+22 |
2018-12-19 | Bluetooth: hci_bcm: Add compatible string for BCM4330 | Chen-Yu Tsai | 1 | -0/+1 |
2018-12-19 | Bluetooth: hci_bcm: Add BCM20702A1 variant | Maxime Ripard | 1 | -0/+1 |
2018-12-19 | Bluetooth: hci_bcm: Wait for device to come out of reset after power on | Chen-Yu Tsai | 1 | -0/+3 |
2018-12-19 | Bluetooth: hci_bcm: Add support for regulator supplies | Chen-Yu Tsai | 1 | -9/+30 |
2018-12-19 | Bluetooth: hci_bcm: Add support for LPO clock | Chen-Yu Tsai | 1 | -5/+36 |
2018-12-19 | Bluetooth: hci_bcm: Use "txco" and "extclk" to get clock reference | Chen-Yu Tsai | 1 | -11/+30 |
2018-12-19 | Bluetooth: hci_bcm: Simplify clk_get error handling | Chen-Yu Tsai | 1 | -3/+7 |
2018-12-19 | Bluetooth: hci_bcm: Handle deferred probing for the clock supply | Chen-Yu Tsai | 1 | -0/+4 |
2018-05-30 | Bluetooth: hci_serdev: Move serdev_device_close/open into common hci_serdev code | Hans de Goede | 1 | -9/+1 |
2018-05-18 | Bluetooth: btbcm: Allow using btbcm_initialize() for reinit | Hans de Goede | 1 | -1/+1 |
2018-05-18 | Bluetooth: hci_bcm: Remove irq-active-low DMI quirk for the Thinkpad 8 | Hans de Goede | 1 | -20/+0 |
2018-05-18 | Bluetooth: hci_bcm: Add broken-irq dmi blacklist and add Meegopad T08 to it | Hans de Goede | 1 | -0/+23 |
2018-04-01 | Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 | Ian W MORRISON | 1 | -7/+0 |
2018-04-01 | Bluetooth: hci_bcm: Add ACPI HIDs found in Windows .inf files and DSTDs | Hans de Goede | 1 | -0/+141 |
2018-04-01 | Bluetooth: hci_bcm: Do not tie GPIO pin order to a specific ACPI HID | Hans de Goede | 1 | -36/+55 |
2018-04-01 | Bluetooth: hci_bcm: Remove duplication in gpio-mappings declaration | Hans de Goede | 1 | -13/+9 |
2018-04-01 | Bluetooth: hci_bcm: Add 6 new ACPI HIDs | Hans de Goede | 1 | -0/+6 |
2018-04-01 | Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low | Hans de Goede | 1 | -17/+3 |
2018-04-01 | Bluetooth: hci_bcm: Add irq_polarity module option | Hans de Goede | 1 | -5/+15 |
2018-04-01 | Bluetooth: hci_bcm: Use default baud rate if missing shutdown GPIO | Marcel Holtmann | 1 | -0/+6 |
2018-04-01 | Bluetooth: hci_bcm: use gpiod cansleep version | Loic Poulain | 1 | -2/+2 |
2018-03-15 | Bluetooth: hci_bcm: Set pulsed_host_wake flag in sleep parameters | Hans de Goede | 1 | -1/+1 |
2018-03-15 | Revert "Bluetooth: hci_bcm: Streamline runtime PM code" | Hans de Goede | 1 | -3/+8 |
2018-02-25 | Bluetooth: hci_bcm: Make shutdown and device wake GPIO optional | Stefan Wahren | 1 | -3/+4 |
2018-01-22 | Bluetooth: hci_bcm: For serdev case close serdev on failure to set power | Hans de Goede | 1 | -1/+4 |
2018-01-10 | Bluetooth: btbcm: Fix sleep mode struct ordering | Lukas Wunner | 1 | -1/+1 |
2018-01-10 | Bluetooth: hci_bcm: Sleep instead of spinning | Lukas Wunner | 1 | -2/+2 |
2018-01-10 | Bluetooth: hci_bcm: Silence IRQ printk | Lukas Wunner | 1 | -1/+1 |
2018-01-10 | Bluetooth: hci_bcm: Support Apple GPIO handling | Lukas Wunner | 1 | -0/+55 |
2018-01-10 | Bluetooth: hci_bcm: Handle errors properly | Lukas Wunner | 1 | -16/+75 |
2018-01-10 | Bluetooth: hci_bcm: Add callbacks to toggle GPIOs | Lukas Wunner | 1 | -4/+23 |
2018-01-10 | Bluetooth: hci_bcm: Document struct bcm_device | Lukas Wunner | 1 | -2/+25 |
2018-01-10 | Bluetooth: hci_bcm: Invalidate IRQ on request failure | Lukas Wunner | 1 | -1/+3 |
2018-01-10 | Bluetooth: hci_bcm: Fix unbalanced pm_runtime_disable() | Lukas Wunner | 1 | -1/+1 |
2018-01-10 | Bluetooth: hci_bcm: Fix race on close | Lukas Wunner | 1 | -4/+4 |
2018-01-10 | Bluetooth: hci_bcm: Clean up unnecessary #ifdef | Lukas Wunner | 1 | -3/+1 |
2018-01-10 | Bluetooth: hci_bcm: Validate IRQ before using it | Ronald Tschalär | 1 | -3/+3 |
2018-01-10 | Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO | Lukas Wunner | 1 | -15/+9 |
2017-12-26 | Bluetooth: hci_bcm: Streamline runtime PM code | Lukas Wunner | 1 | -8/+3 |
2017-12-13 | Bluetooth: hci_bcm: Add support for BCM2E72 | Hans de Goede | 1 | -0/+1 |
2017-10-14 | Bluetooth: hci_bcm: Add support for BCM2E7E | Hans de Goede | 1 | -0/+1 |
2017-10-11 | Bluetooth: hci_bcm: fix build error without CONFIG_PM | Arnd Bergmann | 1 | -0/+4 |
2017-10-10 | Bluetooth: hci_bcm: Add support for MINIX Z83-4 based devices | Ian W MORRISON | 1 | -0/+8 |
2017-10-09 | Bluetooth: hci_bcm: Correct context of IRQ polarity message | Ian W MORRISON | 1 | -1/+1 |
2017-10-06 | Bluetooth: hci_bcm: Add (runtime)pm support to the serdev driver | Hans de Goede | 1 | -50/+68 |
2017-10-06 | Bluetooth: hci_bcm: Make suspend/resume functions platform_dev independent | Hans de Goede | 1 | -4/+4 |