summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-07-28ARM: dts: rainier: Describe GPIO mux on I2C3Andrew Jeffery1-0/+46
We have a 4-bus mux whose output is selected by two GPIO inputs. Wire it up in the devicetree and ensure the output is enabled by hogging the appropriate line. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-27kill unused dump_fpu() instancesAl Viro1-15/+0
dump_fpu() is used only on the architectures that support elf and have neither CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_FPREGS defined. Currently that's csky, m68k, microblaze, nds32 and unicore32. The rest of the instances are dead code. NB: THIS MUST GO AFTER ELF_FDPIC CONVERSION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-27arm: switch to ->regset_get()Al Viro1-40/+12
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-27Merge tag 'at91-dt-5.9' of ↵Arnd Bergmann4-24/+28
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.9 - ClassD pull down fixes - Enable RTT as RTC on sam9x60ek - Fix phy-mode for sama5d3_xplained * tag 'at91-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3_xplained: change phy-mode ARM: dts: at91: sama5d2_xplained: Remove pdmic node ARM: dts: sam9x60: add rtt dt-bindings: rtc: add microchip,sam9x60-rtt ARM: dts: at91: sam9x60ek: classd: pull-down the L1 and L3 lines ARM: dts: at91: sama5d2_xplained: classd: pull-down the R1 and R3 lines Link: https://lore.kernel.org/r/20200726193207.GA182066@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-27Merge tag 'at91-soc-5.9' of ↵Arnd Bergmann2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc AT91 SoC for 5.9 - Two small fixes * tag 'at91-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: Replace HTTP links with HTTPS ones ARM: at91: pm: add missing put_device() call in at91_pm_sram_init() Link: https://lore.kernel.org/r/20200726193335.GA182444@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-27Merge tag 'at91-defconfig-5.9' of ↵Arnd Bergmann1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.9 - Add ClassD, KSZ ethernet switches, brdige, vlan to sama5_defconfig - Reenable CAN support in sama5_defconfig * tag 'at91-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: sama5: enable CAN PLATFORM driver ARM: configs: at91: sama5: enable bridge and VLAN filtering ARM: configs: at91: sama5: add support for KSZ ethernet switches ARM: configs: at91: sama5: Enable CLASSD Link: https://lore.kernel.org/r/20200726192810.GA181818@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-25Merge tag 'v5.8-rc6' into locking/core, to pick up fixesIngo Molnar13-36/+40
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-25ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phyGrygorii Strashko1-1/+1
Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on keystone-k2g-evm board. The above board have phy-mode = "rgmii-id" and it is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay by default. After above commit, the KSZ9031 PHY starts handling phy mode properly and enables both RX and TX delays, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-25ARM: configs: at91: sama5: enable CAN PLATFORM driverCristian Birsan1-0/+1
CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms after the driver was split into multiple files. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
2020-07-25ARM: configs: at91: sama5: enable bridge and VLAN filteringRazvan Stefanescu1-0/+3
These modules are needed to configure bridges in Linux, to take full advantage of the KSZ switch capabilities. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
2020-07-25ARM: configs: at91: sama5: add support for KSZ ethernet switchesRazvan Stefanescu1-0/+3
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by the SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
2020-07-24Merge tag 'amlogic-dt64-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic: updates for v5.9 (round 2) - new board: WeTek Core2 - audio playback support on more boards - add GPU DVFS * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS arm64: dts: amlogic: meson-gxm: add the Mali OPP table and use DVFS arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS arm64: dts: meson: add support for the WeTek Core 2 dt-bindings: arm: amlogic: add support for the WeTek Core 2 arm64: dts: meson: add audio playback to khadas-vim3l arm64: dts: meson: add audio playback to odroid-c4 arm64: dts: meson: update spifc node name on Khadas VIM3/VIM3L ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7h8sf8671u.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24Merge tag 'mvebu-fixes-5.8-1' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.8 (part 1) - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. * tag 'mvebu-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
2020-07-24Merge tag 'mvebu-arm-5.9-1' of ↵Arnd Bergmann1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/soc mvebu arm for 5.9 (part 1) Use of for_each_requested_gpio() for gpio driver still in plat-orion for non DT platform. * tag 'mvebu-arm-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: orion/gpio: Make use of for_each_requested_gpio() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24Merge tag 'davinci-for-v5.9/soc' of ↵Arnd Bergmann15-25/+18
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc DaVinci SoC updates for v5.9 This pull requests contains some clean-ups for SoC support. No functional changes included. * tag 'davinci-for-v5.9/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: dm646x-evm: Simplify error handling in 'evm_sw_setup()' ARM: davinci: Fix trivial spelling ARM: davinci: Replace HTTP links with HTTPS ones Link: https://lore.kernel.org/r/348578af-71ea-812e-ec42-31afe7847b85@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24Merge tag 'mvebu-dt-5.9-1' of ↵Arnd Bergmann2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt for 5.9 (part 1) - Fix the reg-init PHY for the dlink-dns327l (Armada 370) - Replace HTTP links with HTTPS one in device tree of the Excito Bubba B3 (Kirkwood) * tag 'mvebu-dt-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: dlink-dns327l: fix reg-init PHY ARM: dts: kirkwood: Replace HTTP links with HTTPS ones Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-24ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speedsRussell King1-1/+2
To support the change in "phy: armada-38x: fix NETA lockup when repeatedly switching speeds" we need to update the DT with the additional register. Fixes: 14dc100b4411 ("phy: armada38x: add common phy support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-07-24ARM: dts: aspeed: wedge40: Enable pwm_tacho deviceTao Ren1-0/+29
Enable pwm_tacho device for fan control and monitoring in Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: wedge40: Enable ADC deviceTao Ren1-0/+9
Enable ADC controller and corresponding voltage sensoring channels for Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: wedge40: Disable unused i2c controllersTao Ren1-12/+0
Disable i2c bus #9, #10 and #13 as these i2c controllers are not used on Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: cmm: Fixup I2C treeTao Ren1-3/+1228
Create all the i2c switches in device tree and use aliases to assign child channels with consistent bus numbers. Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to avoid potential conflicts when multiple devices (beind the switches) use the same device address. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: tacoma: Add CFAM reset GPIOJoel Stanley1-0/+1
The GPIO on Q0 is used for resetting the CFAM of the processor that the ASPEED master is connected to. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-24ARM: dts: aspeed: rainier: Add CFAM reset GPIOJoel Stanley1-0/+6
The GPIO on Q0 is used for resetting the CFAM of the processor that the ASPEED master is connected to. The signal is wired as active high on the first pass systems. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-23Merge tag 'timers-v5.9' of ↵Thomas Gleixner1-6/+6
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clock event/surce driver changes from Daniel Lezcano: - Add sama5d2 support and rework the 32kHz clock handling (Alexandre Belloni) - Add the high resolution support for SMP/SMT on the Ingenic timer (Zhou Yanjie) - Add support for i.MX TPM driver with ARM64 (Anson Huang) - Fix typo by replacing KHz to kHz (Geert Uytterhoeven) - Add 32kHz support by setting the minimum ticks to 5 on Nomadik MTU (Linus Walleij) - Replace HTTP links with HTTPS ones for security reasons (Alexander A. Klimov) - Add support for the Ingenic X1000 OST (Zhou Yanjie)
2020-07-23Merge tag 'v5.9-rockchip-dts32-1' of ↵Arnd Bergmann17-57/+464
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Biggest part is the addition of the rk3288 variant of the VMARC SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes with it as the underlying Dalang carrier board is shared by both an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10). Other than that rk3288 gets its ohci node added that only works on the fixed rk3288w variant of the soc and some asorted fixes and improvements for dt-binding-check. * tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add PCIe for RockPI N10 ARM: dts: rockchip: Add HDMI out for RockPI N8/N10 ARM: dts: rockchip: Add USB for RockPI N8/N10 ARM: dts: rockchip: Add usb host0 ohci node for rk3288 ARM: dts: rockchip: Fix VBUS on rk3288-vyasa ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support ARM: dts: rockchip: Add VMARC RK3288 SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N8 binding arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac ARM: dts: rockchip: Add marvell BT irq config ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-23crypto: Replace HTTP links with HTTPS onesAlexander A. Klimov6-8/+8
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-22Merge tag 'samsung-soc-5.9' of ↵Arnd Bergmann10-51/+205
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.9 1. Restore big.LITTLE cpuidle support on Exynos542x boards. 2. Cleanups and minor fixes. * tag 'samsung-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c24xx: Replace HTTP links with HTTPS ones ARM: s3c24xx: leds: Convert to use GPIO descriptors ARM: exynos: MCPM: Restore big.LITTLE cpuidle support ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val Link: https://lore.kernel.org/r/20200721180900.13844-4-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22soc: samsung: exynos-regulator-coupler: Add simple voltage coupler for ↵Marek Szyprowski1-0/+1
Exynos5800 Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which require coupling between "vdd_arm" and "vdd_int" regulators. This coupler ensures that the voltage values don't go below the bootloader-selected operation point during the boot process until the clients set their constraints. It is achieved by assuming minimal voltage value equal to the current value if no constraints are set. This also ensures proper voltage balancing if any of the client driver is missing. The balancing code comes from the regulator/core.c with the additional logic for handling regulators without client constraints applied added. Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp3-dell-ariel: Enable the GPULubomir Rintel1-0/+8
Enable the 2D (GC300) and the 3D (GC2000) GPUs cores. Link: https://lore.kernel.org/r/20200718205019.184927-14-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp3: Add the GPULubomir Rintel1-0/+25
There's a GC2000 3D core accompanied by a GC300 2D core. Link: https://lore.kernel.org/r/20200718205019.184927-13-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Enable the GPULubomir Rintel1-0/+4
Enable the 3D + 2D (GC860) GPU core. Link: https://lore.kernel.org/r/20200718205019.184927-12-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add the GPULubomir Rintel1-0/+12
There's a GC860 2D + 3D core. Link: https://lore.kernel.org/r/20200718205019.184927-11-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Enable audio supportLubomir Rintel1-18/+47
This enables the audio SRAM, DMA engine, I2S interface, and codec, hooks them together and adds a audio-graph-card instance. It also removes the jack gpios from the gpio-keys instance, because the audio jack driver registers an input device. Link: https://lore.kernel.org/r/20200718205019.184927-10-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add SSPA nodesLubomir Rintel1-0/+26
There are two I2S-capable audio serial port blocks. Link: https://lore.kernel.org/r/20200718205019.184927-9-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add Audio Clock controllerLubomir Rintel1-0/+13
This device generates the audio codec master clock and bit clock. Link: https://lore.kernel.org/r/20200718205019.184927-8-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add DMA nodesLubomir Rintel1-0/+26
There is a 16-channel peripheral DMA controller along with two-channel audio DMA engines. Link: https://lore.kernel.org/r/20200718205019.184927-7-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add Audio SRAMLubomir Rintel1-0/+9
This memory is region is where the two-channel audio DMA can pump sound samples into the SSPA's internal FIFO. Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Extend the MPMU reg rangeLubomir Rintel1-1/+1
The ACGR register is at the offset of 0x1024, beyond the 4k originally assigned to the MPMU range. Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add #power-domain-cells to /clocksLubomir Rintel1-0/+1
The power management unit, described by the soc_clocks node, controls the power to the peripherals by the means of power domains with a single cell -- the domain number. Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Delete #address-cells from ssp3Lubomir Rintel1-1/+2
On the XO-1.75, this node represents a bus interface that operates in slave mode and thus is only able to accommodate a single subnode; no address cells are necessary. The Documentation/devicetree/bindings/spi/spi-controller.yaml binding prefers that we drop the property instead of setting it to zero. This fixes a DT validation error: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: { ... } is valid under each of {'required': ['spi-slave']}, {'required': ['#address-cells']} We also need to drop #size-cells: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: '#address-cells' is a dependency of '#size-cells' Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Fix camera I2C node validationLubomir Rintel1-3/+3
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0: 'camera_i2c' does not match '^i2c(@.*)?' mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property The "gpios" property actually was documented as deprecated, but got dropped in commit 0175ce4a58d6 ("dt-bindings: i2c: Convert i2c-gpio binding to json-schema"). It's probably best kept forgotten though. Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'ux500-dts-for-v5.9-1' of ↵Arnd Bergmann5-5/+62
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.9 kernel series: - Add touchkey to the Samsung Golden. - Fix up the supply nodes for the AB8500 PWM devices. - Fix up the cache controller node names. - Fix the Samsing Skomer accelerometer mounting matrix. * tag 'ux500-dts-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500-skomer: Correct accel mounting matrix ARM: dts: ste: Align L2 cache-controller nodename with dtschema ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devices ARM: dts: ux500: samsung-golden: Add touchkey Link: https://lore.kernel.org/r/CACRpkdZZgZ1LeOK5zFj5Z6Mh=RVz37hZ-7Z4DQNGC1uaiEVTeA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'stm32-dt-for-v5.9-1' of ↵Arnd Bergmann17-94/+496
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.9, round 1 Highlights: ---------- MCU part: -Enable stmpe811 on stm32f429 -Enable l3gd20-gyro on stm32f429 -Enable panel-ilitek-9341 on stm32f429 -Fixes for yaml validation (leds, nodes names, remove useless bindings ...) -Add stm32xxx compatibles for syscon nodes MPU part: -Add support for usb role switch to dwc2 -Add stm32xxx compatibles for syscon nodes -Update uart4 pin configuration for low power mode used by dkx and ed1 ST boards -Fix uart nodes ordering and uart7_pins_a comments -Add the support of uart instances available on STM32MP157 boards: - usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2 - uart7 on stm32mp157a-dk1 and stm32mp157c-dk2 - usart2 on stm32mp157c-dk2 -Configure I2C5 on stm32mp15 DK boards * tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits) ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx ARM: dts: stm32: Add compatibles for syscon for stm32mp151 ARM: dts: stm32: Add compatibles for syscon for stm32h743 ARM: dts: stm32: Add compatibles for syscon for stm32f746 ARM: dts: stm32: Add compatibles for syscon for stm32f426 dt-bindings: arm: stm32: Add compatibles for syscon nodes ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx ARM: dts: stm32: add usart2 node to stm32mp157c-dk2 ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards ARM: dts: stm32: add usart3 node to stm32mp157c-ev1 ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1 ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157 dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC ... Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'samsung-dt-5.9' of ↵Arnd Bergmann19-394/+445
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.9 1. Enable Bluetooth on Artik5 (Exynos3250). 2. Enable accelerometer on Aries boards (Samsung Galaxy S family, S5Pv210); multiple fixes. 3. Fix highest frequencies on Exynos5800. 4. Fix rare USB instability on Odroid XU3 family (Exynos5422). 5. Minor DTS fixes and adjustments with dtschema. * tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Replace HTTP links with HTTPS ones ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats ARM: dts: exynos: Align L2 cache-controller nodename with dtschema ARM: dts: s5pv210: Correct BCM4329 bluetooth node ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries ARM: dts: s5pv210: Add support for GP2A light sensor on Aries ARM: dts: s5pv210: Correct fuelgauge definition on Aries ARM: dts: s5pv210: Add interrupt-controller property to gph3 ARM: dts: exynos: Enable Bluetooth support for Artik5 board ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data Link: https://lore.kernel.org/r/20200721180900.13844-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-dts-for-5.9' of ↵Arnd Bergmann3-0/+424
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.9 Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik RB3011 using the same platform. * tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add qfprom definition to ipq806x ARM: dts: qcom: Add MikroTik RB3011 ARM: dts: qcom: add ethernet definitions to ipq8064 Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'hisi-arm32-dt-for-5.9' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann2-2/+2
into arm/dt ARM: DT: Hisilicon ARM32 SoCs updates for v5.9 - Update L2 cache controller nodes to fix dtschema validator warnings for hi3620 and hix5hd2 * tag 'hisi-arm32-dt-for-5.9' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/5F165FA1.2030301@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'sunxi-dt-for-5.9-1' of ↵Arnd Bergmann3-3/+65
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual number of patches to improve the Allwinner Device Tree support, including: - CPUFreq / Thermal throttling support for the H5 - Touchscreen support for the Pinephone - New boards: PinePhone v1.2 * tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs arm64: dts: allwinner: h5: Add CPU Operating Performance Points table arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones arm64: dts: allwinner: h5: Add clock to CPU cores ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V arm64: dts: allwinner: Add support for PinePhone revision 1.2 dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings arm64: dts: sun50i-a64-pinephone: Add touchscreen support arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone ARM: dts: orange-pi-zero-plus2: add leds configuration ARM: dts: orange-pi-zero-plus2: enable USB OTG port Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'versatile-for-v5.9' of ↵Arnd Bergmann4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS changes for the v5.9 kernel cycle, essentially just a single patch fixing up the node names for schema. * tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/CACRpkdbkM9ZmuG2FnBmO7upcJfnqq2oSLDCFDXC5b3K+dtps9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-dt-5.9' of ↵Arnd Bergmann105-266/+4462
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'socfpga_dts_update_for_v5.9' of ↵Arnd Bergmann3-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.9 - Populate clock entries for Agilex platform - Add "reset-names" to SPI entries - Add Maxim max1619 temperature sensor to Arria10 devkit * tag 'socfpga_dts_update_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add the temperature sensor to the Arria10 devkit arm: dts: socfpga: add reset-names to spi node arm64: dts: agilex: add nand clocks arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA Agilex Link: https://lore.kernel.org/r/20200719011804.15599-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 15:09:57 +0300