| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.15:
- switch to the new PWM controller bindings
* tag 'amlogic-arm-dt-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8b: switch to the new PWM controller binding
ARM: dts: amlogic: meson8: switch to the new PWM controller binding
Link: https://lore.kernel.org/r/8632a8fa-7af6-4fb7-ba87-297df4f084f5@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements inDTS for v6.15
1. ARM Cirrus EP7211: Align GPIO node name to match what bindings
expect.
2. Loongson 2K1000: Drop incorrect spidev description, by pretending to
have there something else. This will have impact on the users of
DTS, because spidev will stop working, however no counter-proposals
of fixing this or even explaining this were proposed for half a year
after the patch was posted. Therefore drop incorrect hardware
description, hoping affected users will come if proper one, if needed.
* tag 'dt-cleanup-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
loongarch: dts: remove non-existent DAC from 2k1000-ref
ARM: dts: cirrus: ep7211: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/20250316144221.18240-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.15-rc1
This contains a few patches that add some missing, display-related nodes
on Tegra114 and Tegra124, as well as a small fix in the display clock
used for DSI on Tegra114 and the addition of a light sensor found on the
ASUS TF101.
* tag 'tegra-for-6.15-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf101: Add al3000a illuminance sensor node
ARM: tegra: Add DSI-A and DSI-B nodes on Tegra124
ARM: tegra: Add HDA node on Tegra114
ARM: tegra: Add ARM PMU node on Tegra114
ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114
Link: https://lore.kernel.org/r/20250307162332.3451523-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: misc. OMAP updates for v6.15
* tag 'omap-for-v6.15/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap4-panda-a4: Add missing model and compatible properties
dt-bindings: omap: Add TI Pandaboard A4 variant
ARM: dts: ti/omap: omap4-serial: fix interrupts syntax
ARM: dts: ti: omap: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/7hiko7qzud.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.15 (part 1)
device tree clean-up fomr DT maintainers
* tag 'mvebu-dt64-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
ARM: dts: marvell: armada: Align GPIO hog name with bindings
ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings
arm64: dts: marvell: armada-8040: Align GPIO hog name with bindings
arm64: dts: marvell: Add missing board compatible for IEI-Puzzle-M801
arm64: dts: marvell: Fix missing/incorrect "marvell,armada3710" compatible
arm64: dts: marvell: Drop incomplete root compatible/model properties
dt-bindings: marvell: armada-7k-8k: Add missing 7040 and 8040 board compatibles
dt-bindings: marvell: armada-7k-8k: Move Armada 8KPlus to schema
dt-bindings: marvell: armada-37xx: Add glinet,gl-mv1000 compatible
Link: https://lore.kernel.org/r/87wmco99xv.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm64: Zynq DT changes for 6.15
- Align platforms with dt-schema
- Describe QSPI
* tag 'zynq-dt-for-6.15' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Do not define address/size-cells for nand-controller
ARM: zynq: Remove ethernet0 alias from Microzed
ARM: zynq: Add sdhci to alias node
ARM: zynq: Enable QSPIs on platforms
ARM: zynq: Fix fpga region DT nodes name
ARM: zynq: Rename i2c?-gpio to i2c?-gpio-grp
ARM: zynq: Define rtc alias on zc702/zc706
ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706
ARM: zynq: Define u-boot bootscrip addr via DT
ARM: zynq: Wire smcc with nand/nor memories on zc770 platform
ARM: zynq: Mark boot-phase-specific device nodes
ARM: zynq: DT: List OCM memory for all platforms
ARM: zynq: Remove deprecated device_type property
ARM: zynq: Replace 'io-standard' with 'power-source' property
Link: https://lore.kernel.org/r/CAHTX3d+DZo3thrakBf=QCq91QFeChoizuhVa6oBBj9E+sdEXAQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.15
- New board support: NetCube Systems Kumquat
- Enable USB and LED on Anbernic RG35XX
- Fix reboot GPIO detection logic on Anbernic RG35XX
- Disable (non-existent) battery thermistor on Anbernic RG35XX
- Add CPU OPP table for A100
* tag 'sunxi-dt-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: Add CPU Operating Performance Points table
arm64: dts: allwinner: rg35xx: Add no-thermistor property for battery
arm64: dts: allwinner: h700: Add USB Host for RG35XX-H
arm64: dts: allwinner: h700: Add LED1 for Anbernic RG35XX
arm64: dts: allwinner: h700: Set cpusldo to always-on for RG35XX
ARM: dts: sunxi: add support for NetCube Systems Kumquat
ARM: dts: sunxi: add uart1_pe pinctrl for sun8i-v3s
dt-bindings: arm: sunxi: Add NetCube Systems Kumquat board
dt-bindings: vendor-prefixes: Add NetCube Systems Austria name
Link: https://lore.kernel.org/r/Z9LTOHJDY2p0lNG0@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.15
This update includes:
- more controllers enabled for SAMA7D65 SoC (DMA, reset controller,
shutdown controller, RTC, watchdog)
- power monitor device enabled for SAMA7D65 Curiosity board
- device tree cleanups
* tag 'at91-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add ADC hw trigger edge type
ARM: dts: microchip: sama7d65: Add watchdog for sama7d65
ARM: dts: microchip: sama7d65: Enable shutdown controller
ARM: dts: microchip: sama7d65: Add SFRBU support to sama7d65
ARM: dts: microchip: sama7d65: Add RTC support for sama7d65
ARM: dts: microchip: sama7d65: Add Shutdown controller support
ARM: dts: microchip: sama7d65: Add Reset Controller to sama7d65 SoC
ARM: dts: microchip: fix faulty ohci/ehci node names
ARM: dts: microchip: usb_a9263: fix wrong vendor
ARM: dts: microchip: sama7d65: Enable DMAs
ARM: dts: microchip: sama7d65: Add DMAs to sama7d65 SoC
ARM: dts: microchip: sama7d65: Add chipID for sama7d65
ARM: dts: microchip: sama7d65_curiosity: Add power monitor support
ARM: dts: microchip: sama7d65: Add flexcom 10 node
ARM: dts: at91: usb_a9g20_lpw: use proper mmc node name
ARM: dts: at91: calao_usb: fix button nodes
ARM: dts: at91: use correct vendor name for Calao boards
ARM: dts: at91: calao_usb: remove heartbeat for User LEDs
ARM: dts: at91: calao_usb: fix wrong polarity for LED
Link: https://lore.kernel.org/r/20250312173755.975074-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.15, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
arm64: dts: st: add stm32mp215f-dk board support
dt-bindings: stm32: document stm32mp215f-dk board
arm64: dts: st: introduce stm32mp21 SoCs family
arm64: dts: st: add stm32mp235f-dk board support
dt-bindings: stm32: document stm32mp235f-dk board
arm64: dts: st: introduce stm32mp23 SoCs family
dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
arm64: dts: st: add stm32mp257f-dk board support
dt-bindings: stm32: document stm32mp257f-dk board
ARM: dts: stm32: Add Plymovent AQM devicetree
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
dt-bindings: arm: stm32: Add Plymovent AQM board
dt-bindings: sound: convert ICS-43432 binding to YAML
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
ARM: dts: stm32: add usr3 LED node to stm32f769-disco
ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
ARM: dts: stm32: add push button to stm32f746 Discovery board
ARM: dts: stm32: add led to stm32f746 Discovery board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
As commit "net: stmmac: stm32: use PHY capability for TX clock stop"
adds the flag to use the PHY capability, remove the DT property that is
now unecessary.
Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUA-005vGX-8A@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Link: https://lore.kernel.org/r/20250312074005.663165-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/dt
TI DaVinci updates for v6.15-rc1
- make GPIO hog names conform to bindings
* tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
ARM: dts: ti: davinci: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/20250311115720.40053-1-brgl@bgdev.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.14, please pull the following:
- Chester fixes the switch port assignments on the ASUS RT-AC3200 and
RT-AC5300 routers
- Phil removes a Device Tree property flagging the BCM2711 ARM timers as
not being configured which would have prevented the use of vDSO on the
Pi 4 running a 32-bit kernel
* tag 'arm-soc/for-6.14/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
Link: https://lore.kernel.org/r/20250308150528.1900822-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Introduce the devicetree for the Plymovent AQM board
(stm32mp151c-plyaqm), based on the STM32MP151 SoC.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-5-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinmux groups required for the Plymovent AQM board.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250305131425.1491769-4-o.rempel@pengutronix.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite Concerto Carrier Board with:
- LVDS interface for the VLCD-CAP-GLD-LVDS 7" LCD 800 x 480 touch
display (not configured)
- USB Host + USB OTG Connector
- 10/100 Mbps Ethernet
- miniPCI-Express slot
- SD Card connector
- Audio Headphone/Line In jack connectors
- S-ATA
- On-board DMIC
Product Page: https://www.variscite.com/product/single-board-computers/concerto-board
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Variscite VAR_SOM-MX6UL SoM with:
- NXP i.MX6 UltraLite SoC
- 128–1024 MB DDR3L
- 8–128 GB eMMC
- 128–512 MB SLC NAND
- Camera Interface
- LVDS / Parallel RGB interfaces (not configured)
- Touch controller (not configured)
- Ethernet RMII interface (not configured)
- On-SoM Wi-Fi/Bluetooth with CYW43353 on SDIO Module (not configured)
- SD/MMC/SDIO interface
- USB Host + USB OTG interface
- I2C interfaces
- SPI interfaces
- PCI-Express 2.0 interface
- on-SoM Audio Codec (not configured)
- S/PDIF interface (not configured)
Product website: https://www.variscite.com/product/system-on-module-som/cortex-a7/var-som-6ul-nxp-imx6ul-6ull-6ulz
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SoM cannot be used standalone, this compatible is invalid and it is
always overwritten when this .dtsi file is included, remove it
therefore.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Fixes: 7b8861d8e627 ("ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
gpio-pca95xx.yaml documents 'nxp,pca9554', so use this compatible
to fix the following dt-schema warning:
failed to match any schema with compatible: ['pca9554']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to mxc-nand.yaml, the correct node name must be
'nand-controller'.
Change it accordingly to fix the following dt-schema warning:
$nodename:0: 'nand@b8000000' does not match '^nand-controller(@.*)?'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,dspi.yaml the expected order for describing the dmas
and dma-names properties is "tx" first, followed by "rx".
Adjust it acordingly to fix the following dt-schema warnings:
spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader may add MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions. Remove #size-cells from MTD node
because this is deprecated.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This matches the real hardware and allows to remove
the virtual 3.3V regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is a fixed 3.3V rail supplying several hardware on SOM.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'compatible' and 'reg' are put first.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip interrupt and reset lines.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250302152605.54792-1-marex@denx.de
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Replace the number 2 with the appropriate numerical constant defined in
dt-bindings/interrupt-controller/irq.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/20250310122402.8795-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Apparently, ASUS's own firmware also
describes them incorrectly. Correct them to what is seen on the chassis.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: b116239094d8 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250304-for-broadcom-fix-rt-ac3200-switch-ports-v1-1-7e249a19a13e@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
After using the device for a while, Tom reports that he initially described
the switch port labels incorrectly. Correct them.
Reported-by: Tom Brautaset <tbrautaset@gmail.com>
Fixes: 961dedc6b4e4 ("ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300")
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/r/20250303-for-broadcom-fix-rt-ac5300-switch-ports-v1-1-e058856ef4d3@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
During upstream process of Raspberry Pi 4 back in 2019 the ARMv7 stubs
didn't configured the ARM architectural timer. This firmware issue has
been fixed in 2020, which gave users enough time to update their system.
So drop this property to allow the use of the vDSO version of
clock_gettime.
Link: https://github.com/raspberrypi/tools/pull/113
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222094113.48198-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:
armada-385-clearfog-gtr-s4.dtb: wifi-disable: $nodename:0: 'wifi-disable' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Bind al3000a illuminance sensor found in ASUS TF101
Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250217140336.107476-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Bind DSI devices and MIPI calibration.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-6-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add HDA device binding.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add ARM PMU node for Tegra114 like it is done for Tegra30 and Tegra124.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.15
- Add support for the second and third Ethernet interfaces on the Gray
Hawk Single development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V3U and V4M SoCs,
- Add Watchdog and System Controller support for the RZ/G3E SoC and
the RZ/G3E SMARC Carrier-II EVK development board,
- Add initial support for the Yuridenki-Shokai Kakip and MYIR Remi Pi
boards,
- Add support for the spare UART and PMOD serial ports on the RZ/G3S
SMARC Carrier II board,
- Add a CPU Operating Performance Points table for the RZ/G3S SoC,
- Add boot phase tags on R-Car Gen2/3/4 and RZ/G2 boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.15-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
ARM: dts: renesas: r9a06g032: Fix UART dma channel order
arm64: dts: renesas: rzg2: Add boot phase tags
arm64: dts: renesas: rcar: Add boot phase tags
ARM: dts: renesas: rcar-gen2: Add boot phase tags
arm64: dts: renesas: white-hawk-csi-dsi: Use names for CSI-2 data line orders
arm64: dts: renesas: ulcb/kf: Use TDM Split Mode for capture
arm64: dts: renesas: Add initial support for MYIR Remi Pi
arm64: dts: renesas: r9a08g045: Add OPP table
arm64: dts: renesas: r9a09g057: Enable SYS node
arm64: dts: renesas: r9a09g047: Add SYS node
arm64: dts: renesas: r9a08g045: Enable SYS node
arm64: dts: renesas: r8a779f0: Disable rswitch ports by default
arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1
arm64: dts: renesas: rzg3s-smarc: Enable SCIF3
arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
arm64: dts: renesas: r8a779g0: Restore sort order
arm64: dts: renesas: s4sk: Fix ethernet0 alias for rswitch
arm64: dts: renesas: spider-ethernet: Add ethernetN aliases for rswitch
arm64: dts: renesas: s4sk: Access rswitch ports via phandles
arm64: dts: renesas: spider-ethernet: Access rswitch ports via phandles
...
Link: https://lore.kernel.org/r/cover.1740156747.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.14:
- A tqma8mpql board fix from Alexander Stein to correct vqmmc-supply for
usdhc3
- A change from Joe Hattori to fix OF node leak in imx-scu driver probe
- A soc-imx8m driver fix from Peng Fan unregister cpufreq and soc device
in cleanup path
- A couple of changes from Stefan Eichenberger to fix iMX6 Apalis
poweroff and iMX8M verdin-dahlia sound-card descriptions
* tag 'imx-fixes-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx8mm-verdin-dahlia: add Microphone Jack to sound card
arm64: dts: freescale: imx8mp-verdin-dahlia: add Microphone Jack to sound card
soc: imx8m: Unregister cpufreq and soc dev in cleanup path
ARM: dts: imx6qdl-apalis: Fix poweroff on Apalis iMX6
arm64: dts: freescale: tqma8mpql: Fix vqmmc-supply
firmware: imx-scu: fix OF node leak in .probe()
Link: https://lore.kernel.org/r/Z8A+rihFV4K3l8QR@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
