summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18ARM: dts: qcom: use generic node name "gpio" in SPMI PMICKrzysztof Kozlowski2-2/+2
GPIO controller nodes are named by convention just "gpio", not "gpios". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908080938.29199-1-krzysztof.kozlowski@linaro.org
2022-10-18ARM: dts: qcom: msm8974: Drop redundant phy-names from DSI controllerBryan O'Donoghue1-1/+0
phy-names has been marked deprecated. Remove it from the msm8974 DSI controller block. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220907000105.786265-4-bryan.odonoghue@linaro.org
2022-10-18ARM: dts: qcom: apq8064: Drop redundant phy-names from DSI controllerBryan O'Donoghue1-1/+0
phy-names has been marked deprecated. Remove it from the apq8064 DSI controller block. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220907000105.786265-3-bryan.odonoghue@linaro.org
2022-10-17ARM: dts: qcom: msm8660: drop qcom, prefix from SSBI node nameDmitry Baryshkov1-1/+1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-24-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8660: drop unit ids from PMIC nodesDmitry Baryshkov1-1/+1
On MSM8660 the PMICs are connected using SSBI devices, which do not have any addressing scheme. Drop the unused unit ids from PMIC device nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-23-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8060-dragonboard: use labels to patch device treeDmitry Baryshkov2-914/+911
Use labels to add device-specific properties to DT nodes rather than duplicating SoC DT structure in the device DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-22-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8660: move pm8058 LED devices to the main DT fileDmitry Baryshkov2-9/+29
Declare PM8058 LED devices in the main msm8660 DT file to allow them to be used by other devices. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-21-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8960: drop amba device nodeDmitry Baryshkov1-37/+31
The separate amba device node doesn't add anything significant to the DT. The OF parsing code already creates amba_device or platform_device depending on the compatibility lists. Drop the amba node and reorder sdcc nodes according to node addresses. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-20-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8960-cdp: drop unit ids from regulator nodeDmitry Baryshkov1-1/+1
Drop the unused unit id from the gpio-regulator node, there is no addessing scheme in the /regulators node. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-19-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8960: drop qcom, prefix from SSBI node nameDmitry Baryshkov1-1/+1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-18-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8960: drop unit ids from PMIC nodesDmitry Baryshkov1-1/+1
On MSM8960 the PMICs are connected using SSBI devices, which do not have any addressing scheme. Drop the unused unit ids from PMIC device nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-17-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064: fix the riva-pil node idDmitry Baryshkov1-1/+1
Fix the address of the riva-pil node. The first region address is 0x3200800, so the node should also be called riva-pil@3200800. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-16-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064: drop qcom, prefix from SSBI node nameDmitry Baryshkov1-1/+1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-15-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064: drop unit ids from PMIC nodesDmitry Baryshkov1-2/+2
On APQ8064 the PMICs are connected using SSBI devices, which do not have any addressing scheme. Drop the unused unit ids from PMIC device nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-14-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064: drop amba device nodeDmitry Baryshkov1-69/+62
The separate amba device node doesn't add anything significant to the DT. The OF parsing code already creates amba_device or platform_device depending on the compatibility lists. Drop the amba node and reorder sdcc and sdcc bam nodes according to node addresses. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-13-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-sony-xperia-lagan-yuga: use labels to patch device treeDmitry Baryshkov1-331/+318
Use labels to add device-specific properties to DT nodes rather than duplicating SoC DT structure in the device DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-12-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-cm-qs600: pull SDCC pwrseq node up one levelDmitry Baryshkov1-12/+5
There are no need to add additional simple-bus nodes just to populate a single pwrseq device. Pull it up one level into /. While we are at it also fix node name replacing underscore with dash. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-11-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-cm-qs600: pull 3p3v regulator from soc nodeDmitry Baryshkov1-10/+7
The 3.3V regulator is not part of the SoC, so pull it from the SoC node. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-10-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-cm-qs600: use labels to patch device treeDmitry Baryshkov1-189/+183
Use labels to add device-specific properties to DT nodes rather than duplicating SoC DT structure in the device DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-9-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-nexus7-flo: fix node name for ext 3p3v regulatorDmitry Baryshkov1-1/+1
Rename ext 3p3v regulator node, fixing the 'node has a unit name, but no reg or ranges property' warning. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-8-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-flo: use labels to patch device treeDmitry Baryshkov1-266/+255
Use labels to add device-specific properties to DT nodes rather than duplicating SoC DT structure in the device DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-7-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-ifc6410: pull SDCC pwrseq node up one levelDmitry Baryshkov1-11/+7
There are no need to add additional simple-bus nodes just to populate a single pwrseq device. Pull it up one level into /. While we are at it also fix node name replacing underscore with dash. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-6-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-ifc6410: fix user1 LED node nameDmitry Baryshkov1-1/+1
There are no address-cells for the gpio-leds child nodes, so rename led@1 node to led-user1. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-5-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-ifc6410: pull ext-3p3v regulator from soc nodeDmitry Baryshkov1-12/+10
The ext 3.3V regulator is not part of the SoC, so pull it from the SoC node. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-4-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064-ifc6410: use labels to patch device treeDmitry Baryshkov2-272/+255
Use labels to add device-specific properties to DT nodes rather than duplicating SoC DT structure in the device DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-3-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: apq8064: disable HDMI nodes by defaultDmitry Baryshkov1-0/+4
Disable HDMI nodes. Individual board can enable them if required. The only APQ8064 board that has working HDMI output is IFC6410, which enables these devices explicitly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220930185236.867655-2-dmitry.baryshkov@linaro.org
2022-10-17ARM: dts: qcom: msm8974: align TLMM pin configuration with DT schemaKrzysztof Kozlowski1-15/+15
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006124659.217540-7-krzysztof.kozlowski@linaro.org
2022-10-17ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schemaKrzysztof Kozlowski2-15/+15
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006124659.217540-6-krzysztof.kozlowski@linaro.org
2022-10-17ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schemaKrzysztof Kozlowski1-30/+15
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Schema also requires 'function' property, so two nodes for the same gpio (mux and config) should be merged into one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006124659.217540-5-krzysztof.kozlowski@linaro.org
2022-10-17ARM: dts: qcom: sdx55: add gpio-ranges to TLMM pinctrlKrzysztof Kozlowski1-0/+1
Add required gpio-ranges property to TLMM pinctrl node: qcom-sdx55-mtp.dtb: pinctrl@f100000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221006124659.217540-4-krzysztof.kozlowski@linaro.org
2022-10-17ARM: dts: qcom: align RPM regulators node name with bindingsKrzysztof Kozlowski9-13/+13
Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926092104.111449-4-krzysztof.kozlowski@linaro.org
2022-10-17ARM: dts: ux500: Add GPS to the KyleLinus Walleij1-0/+29
This adds the GPS chip to the Kyle device tree. Link: https://lore.kernel.org/r/20220815203044.468686-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17ARM: dts: DBx500 cryp and hash uses power domainLinus Walleij1-4/+2
The cryp and hash blocks of the DBx500 uses the VAPE power domain, the special regulator is a leftover that is not used anymore. Link: https://lore.kernel.org/r/20220721153610.1053845-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17ARM: dts: ux500: Fix up the Janice NFC chipLinus Walleij1-5/+9
The NFC chip in Janice is a PNX544 not PNX547 and it is on I2C address 0x2b. Fix it up. This is only mounted in Janice models designated GT-I9070P. Cc: Stefan Hansson <newbyte@disroot.org> Link: https://lore.kernel.org/r/20220815193440.388695-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17ARM: dts: ste: ux500: align SPI node name with dtschemaKrzysztof Kozlowski4-4/+4
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220810111037.280959-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds2-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-07Merge tag 'mfd-next-6.1' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Fix 'mfd_of_node_list' OF node entry resource leak New Drivers: - Add support for Ocelot VSC7512 Networking Chip - Add support for MediaTek MT6370 subPMIC - Add support for Richtek RT5120 (I2C) PMIC New Device Support: - Add support for Rockchip RV1126 and RK3588 to Syscon - Add support for Rockchip RK817 Battery Charger to RK808 - Add support for Silergy SY7636a Voltage Regulator to Simple MFD - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI - Add support for Secure Update to Intel M10 BMC New Functionality: - Provide SSP type to Intel's LPSS (PCI) SPI driver Fix-ups: - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon - Unify / simplify; intel_soc_pmic_crc - Trivial reordering / spelling, etc; Makefile, twl-core - Convert to managed resources; intel_soc_pmic_crc - Use appropriate APIs; intel_soc_pmic_crc - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core - GPIOD conversion; htc-i2cpld, stmpe - Add missing header file includes; twl4030-irq - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152, aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon, qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063 Bug Fixes: - Properly check return values; sm501, htc-i2cpld - Repair Two-Wire Bus Mode; da9062-core - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788, lp8788-irq" * tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: syscon: Remove repetition of the regmap_get_val_endian() mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE power: supply: Add charger driver for Rockchip RK817 dt-bindings: mfd: mt6370: Fix the indentation in the example mfd: da9061: Fix Failed to set Two-Wire Bus Mode. mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe() dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018 mfd: sm501: Add check for platform_driver_register() dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 mfd: twl4030: Add missed linux/device.h header dt-bindings: mfd: dlg,da9063: Add missing regulator patterns dt-bindings: mfd: sprd: Add bindings for ums512 global registers mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc dt-bindings: mfd: syscon: Add rk3588 QoS register compatible mfd: stmpe: Switch to using gpiod API mfd: qcom-spmi-pmic: Add pm7250b compatible dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver mfd: intel-m10-bmc: Add d5005 bmc secure update driver dt-bindings: mfd: syscon: Drop ref from reg-io-width ...
2022-10-06Merge tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-22/+40
Pull ARM SoC updates from Arnd Bergmann: "The main changes this time are for the organization of the Kconfig files, introducing per-vendor top-level options on arm64 to match those on arm32, and making the platform selection on arm32 more uniform, in particular for the remaining StrongARM platforms that still have a couple of special cases compared to the more recent ones. I also did a cleanup of the old Footbridge platform, which was the last holdout for the phys_to_dma()/dma_to_phys() interface that is now completely gone from arm32, completing work started by Christoph Hellwig" * tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: aspeed: Kconfig: Fix indentation ARM: Drop CMDLINE_* dependency on ATAGS ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORM ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h pxa: Drop if with an always false condition ARM: orion: fix include path ARM: shmobile: Drop selecting SOC_BUS arm64: renesas: Drop selecting SOC_BUS ARM: disallow PCI with MMU=n again ARM: footbridge: remove custom DMA address handling MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry ARM: footbridge: move isa-dma support into footbridge ARM: footbridge: remove leftover from personal-server ARM: footbridge: remove addin mode arm64: Kconfig.platforms: Group NXP platforms together arm64: Kconfig.platforms: Re-organized Broadcom menu ARM: make ARCH_MULTIPLATFORM user-visible ARM: fix XIP_KERNEL dependencies ARM: Kconfig: clean up platform selection ARM: simplify machdirs/platdirs handling ...
2022-10-06Merge tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds231-1773/+5743
Pull ARM devicetree updates from Arnd Bergmann: "Most of the changes fall into one of three categories: adding support for additional devices on existing machines, cleaning up issues found by the ongoing conversion to machine-readable bindings, and addressing minor mistakes in the existing DT data. Across SoC vendors, Qualcomm and Freescale stick out as getting the most updates, which corresponds to their dominance in the mobile phone and embedded industrial markets, respectively. There are 636 non-merge changeset in this branch, which is a little lower than most times, but more importantly we only add 36 machine files, which is about half of what we had the past few releases. Eight new SoCs are added, but all of them are variations of already supported SoC families, and most of them come with one reference board design from the SoC vendor: - Mediatek MT8186 is a Chromebook/Tablet type SoC, similar to the MT65xx series of phone SoCs, with two Cortex-A76 and six Cortex-A55 cores. - TI AM62A is another member of the K3 family with Cortex-A53 cores, this one is targetted at Video/Vision processing for industrial and automotive applications. - NXP i.MX8DXL is another chip for this market in the ever-growing i.MX8 family, this one again with two Cortex-A35 cores. - Renesas R-Car H3Ne-1.7G (R8A779MB) and R-Car V3H2 (R8A77980A) are minor updates of R8A77951 and R8A77980, respectively. - Qualcomm IPQ8064-v2.0, IPQ8062 and IPQ8065 are all variants of the IPQ8064 chip, with minimally different features. The AMD Pensando Elba and Apple M1 Ultra SoC support was getting close this time, but in the end did not make the cut. The new machines based on existing SoC support are fairly uneventful: - Sony Xperia 1 IV is a fairly recent phone based on Qualcomm Snapdragon 8 Gen 1. - Three Samsung phones based on Snapdragon 410: Galaxy E5, E7 and Grand Max. These are added for both 32-bit and 64-bit kernels, as they originally shipped running 32-bit code. - Two new servers using AST2600 BMCs: AMD DaytonaX and Ampere Mt. Mitchell - Three new machines based on Rockchips RK3399 and RK3566: Anberic RG353P and RG503, Pine64 Pinephone Pro, Open AI Lab - Multiple NXP i.MX6/i.MX8 based boards: Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board - Two development boards in the Microchip AT91 family: SAMA5D3-EDS and lan966x-pcb8290. - Minor variants of existing boards using Amlogic, Broadcom, Marvell, Rockchips, Freescale Layerscape and Socionext Uniphier SoCs" * tag 'arm-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (617 commits) Revert "ARM: dts: BCM5301X: Add basic PCI controller properties" ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ...
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-05Revert "ARM: dts: BCM5301X: Add basic PCI controller properties"Arnd Bergmann1-12/+0
Adding the #address-cells/#size-cells properties without also adding the other required properties for PCI nodes causes new build warnings from dtc that now show up everywhere, rather than just while verifying the yaml bindings: arch/arm/boot/dts/bcm5301x.dtsi:240.21-246.5: Warning (pci_bridge): /axi@18000000/pcie@12000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:248.21-254.5: Warning (pci_bridge): /axi@18000000/pcie@13000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm5301x.dtsi:256.21-262.5: Warning (pci_bridge): /axi@18000000/pcie@14000: missing ranges for PCI bridge (or not a bridge) arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Revert it for now. Fixes: 61dc1e3850a6 ("ARM: dts: BCM5301X: Add basic PCI controller properties") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'samsung-dt-dt64-6.1-2' of ↵Arnd Bergmann3-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM and ARM64 changes for v6.1 Late cleanup and fixes for Samsung DTS: 1. Fix polarity of pins: - enable GPIO of NFC chip in Exynos5433 TM2 boards, - vbus GPIO of EHCI in Exynos4412 Origen board. 2. Correct name of pin configuration nodes - redundant "pins" in the name (no functional impact). * tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: correct double "pins" in pinmux node ARM: dts: exynos: fix polarity of VBUS GPIO of Origen arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2 Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-04Merge tag 'hardening-v6.1-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: "Most of the collected changes here are fixes across the tree for various hardening features (details noted below). The most notable new feature here is the addition of the memcpy() overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step on the path to killing the common class of "trivially detectable" buffer overflow conditions (i.e. on arrays with sizes known at compile time) that have resulted in many exploitable vulnerabilities over the years (e.g. BleedingTooth). This feature is expected to still have some undiscovered false positives. It's been in -next for a full development cycle and all the reported false positives have been fixed in their respective trees. All the known-bad code patterns we could find with Coccinelle are also either fixed in their respective trees or in flight. The commit message in commit 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()") for the feature has extensive details, but I'll repeat here that this is a warning _only_, and is not intended to actually block overflows (yet). The many patches fixing array sizes and struct members have been landing for several years now, and we're finally able to turn this on to find any remaining stragglers. Summary: Various fixes across several hardening areas: - loadpin: Fix verity target enforcement (Matthias Kaehlcke). - zero-call-used-regs: Add missing clobbers in paravirt (Bill Wendling). - CFI: clean up sparc function pointer type mismatches (Bart Van Assche). - Clang: Adjust compiler flag detection for various Clang changes (Sami Tolvanen, Kees Cook). - fortify: Fix warnings in arch-specific code in sh, ARM, and xen. Improvements to existing features: - testing: improve overflow KUnit test, introduce fortify KUnit test, add more coverage to LKDTM tests (Bart Van Assche, Kees Cook). - overflow: Relax overflow type checking for wider utility. New features: - string: Introduce strtomem() and strtomem_pad() to fill a gap in strncpy() replacement needs. - um: Enable FORTIFY_SOURCE support. - fortify: Enable run-time struct member memcpy() overflow warning" * tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits) Makefile.extrawarn: Move -Wcast-function-type-strict to W=1 hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero sparc: Unbreak the build x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled x86/paravirt: clean up typos and grammaros fortify: Convert to struct vs member helpers fortify: Explicitly check bounds are compile-time constants x86/entry: Work around Clang __bdos() bug ARM: decompressor: Include .data.rel.ro.local fortify: Adjust KUnit test for modular build sh: machvec: Use char[] for section boundaries kunit/memcpy: Avoid pathological compile-time string size lib: Improve the is_signed_type() kunit test LoadPin: Require file with verity root digests to have a header dm: verity-loadpin: Only trust verity targets with enforcement LoadPin: Fix Kconfig doc about format of file with verity digests um: Enable FORTIFY_SOURCE lkdtm: Update tests for memcpy() run-time warnings fortify: Add run-time WARN for cross-field memcpy() fortify: Use SIZE_MAX instead of (size_t)-1 ...
2022-10-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+2
Pull ARM fixes from Russell King: "Three fixes for ARM: - unbreak the RiscPC build - fix wrong pg_level in page table dumper - make MT_MEMORY_RO really read-only with LPAE" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd() ARM: 9243/1: riscpc: Unbreak the build
2022-09-30ARM: dts: s5pv210: correct double "pins" in pinmux nodeKrzysztof Kozlowski2-3/+3
Drop second "pins" suffix from pin configuration/mux nodes. Link: https://lore.kernel.org/r/20220926125824.477920-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30ARM: dts: exynos: fix polarity of VBUS GPIO of OrigenDmitry Torokhov1-1/+1
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski7-11/+16
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28Merge branch 'uniphier/dt' into arm/dtArnd Bergmann13-136/+345
Updates from Kunihiko Hayashi via email: "Update devicetree sources for UniPhier armv8 SoCs to remove dtschema warnings, add support existing features that haven't yet been described, and replace constants with macros." * uniphier/dt: arm64: dts: uniphier: Add L2 cache node arm64: dts: uniphier: Remove compatible "snps,dw-pcie" from pcie node arm64: dts: uniphier: Fix opp-table node name for LD20 arm64: dts: uniphier: Add USB-device support for PXs3 reference board arm64: dts: uniphier: Add ahci controller nodes for PXs3 arm64: dts: uniphier: Use GIC interrupt definitions arm64: dts: uniphier: Rename gpio-hog nodes arm64: dts: uniphier: Rename usb-glue node for USB3 to usb-controller arm64: dts: uniphier: Rename usb-phy node for USB2 to usb-controller arm64: dts: uniphier: Rename pvtctl node to thermal-sensor ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card ARM: dts: uniphier: Add ahci controller nodes for PXs2 ARM: dts: uniphier: Add ahci controller nodes for Pro4 ARM: dts: uniphier: Use GIC interrupt definitions ARM: dts: uniphier: Rename gpio-hog node ARM: dts: uniphier: Rename usb-glue node for USB3 to usb-controller ARM: dts: uniphier: Rename usb-phy node for USB2 to usb-controller ARM: dts: uniphier: Rename pvtctl node to thermal-sensor
2022-09-28arm64: dts: uniphier: Add USB-device support for PXs3 reference boardKunihiko Hayashi1-0/+10
PXs3 reference board can change each USB port 0 and 1 to device mode with jumpers. Prepare devicetree sources for USB port 0 and 1. This specifies dr_mode, pinctrl, and some quirks and removes nodes for unused phys and vbus-supply properties. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 18:03:55 +0300