summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rk3288-rock2-square.dts
AgeCommit message (Collapse)AuthorFilesLines
2022-10-30arm: dts: rockchip: remove clock-frequency from rtcSebastian Reichel1-1/+0
'clock-frequency' is not part of the DT binding and not supported by the Linux driver. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221024165549.74574-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-10-30arm: dts: rockchip: fix node name for hym8563 rtcSebastian Reichel1-1/+1
Fix the node name for hym8563 in all arm rockchip devicetrees. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-06-22ARM: dts: rockchip: align gpio-key node names with dtschemaKrzysztof Kozlowski1-1/+1
The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220616005333.18491-27-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-08-30ARM: dts: rockchip: replace status value "ok" by "okay"Adrian Schmutzler1-1/+1
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200830190820.20583-1-freifunk@adrianschmutzler.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-05-19ARM: dts: rockchip: rename and label gpio-led subnodesJohan Jonker1-2/+2
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds: 'blue', 'green', 'sleep' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner1-9/+9
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-28ARM: dts: rockchip: clean up the abuse of disable-wpShawn Lin1-1/+0
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-17ARM: dts: rockchip: use SPDX-License-IdentifierKlaus Goger1-39/+1
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers. All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only) claim to be GPL and X11 while the actual license text is MIT. Use the MIT SPDX tag for them. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Brian Norris <briannorris@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-19ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 SquareJohn Keeping1-0/+4
This allows the USB gadget framework to be used on Rock2 Square. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-19ARM: dts: rockchip: add recovery button for Rock2 SquareJohn Keeping1-0/+17
The recovery button is connected to ADC1. This is the same setup as the Firefly board, but for Rock2 the power supply is connected on the module and all of the inputs are wired up to the edge connector, so use of the ADC depends on the carrier board. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-19ARM: dts: rockchip: add power key for Rock2 SquareJohn Keeping1-0/+20
Support the power button on Radxa Rock2 Square. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: remove num-slots from all platformsShawn Lin1-2/+0
We deprecated the "num-slots" property now and plan to get rid of it finally. Just move a step to cleanup it from DT. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-05-14ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2Sjoerd Simons1-4/+4
Now that the rockchip usb phy has a vbus-supply property use that to control the vbus regulator on rock2. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-28ARM: dts: rockchip: Enable sata support on rock2 squareSjoerd Simons1-0/+21
The Rock 2 square board has a USB -> SATA converter hooked up to its usb host1 connection. Enable the usb controller and always turn on the power on the 5V sata power connector (controlled by gpio). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-06ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2Romain Perier1-0/+41
This commit adds the DT definition of the es8388 i2c device found at address 0x10. It also adds the definition for connecting the Rockchip I2S to the es8388 analog output. This commit is based on the initial work that was done by Sjoerd Simons <sjoerd.simons@collabora.com> with some improvements. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02ARM: dts: rockchip: use pin constants to describe gpiosAndy Yan1-7/+7
Use macros to describe gpios will make the dts easier to read and write. All the modifications done with sed: sed -i -e 's/ 0 GPIO_ACTIVE_/ RK_PA0 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 1 GPIO_ACTIVE_/ RK_PA1 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 2 GPIO_ACTIVE_/ RK_PA2 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* ....... ....... sed -i -e 's/ 30 GPIO_ACTIVE_/ RK_PD6 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* sed -i -e 's/ 31 GPIO_ACTIVE_/ RK_PD7 GPIO_ACTIVE_/' arch/arm/boot/dts/rk* Tested with: for i in dts-old/*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [also adapted the gpio interrupts] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-25ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 squareSjoerd Simons1-1/+31
Enable the sdio0 slot on the Rock2 square which has a broadcom wifi chip attached and add a power sequence to enable the wifi chip and turn on the required 32k clock. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-25ARM: dts: rockchip: Add LEDs via gpio-leds for Radxa Rock2 SquareRomain Perier1-0/+16
Describe the two user-controllable LEDs on Rock2 Square boards. All information have been retrieved from the schematics and the vendor devicetree. The default-triggers mimic the behaviour of the vendor-kernel to keep functionalities in sync. Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-23ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 SquareSjoerd Simons1-0/+13
Add support for the IR receiver as present on the Radxa Rock 2 Square board. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-10-13ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 SquareSjoerd Simons1-0/+18
Enable the SPDIF optical output on Radxa Rock2 square boards Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-10-08ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square boardSjoerd Simons1-0/+149
The Radxa Rock 2 Square board is a combination of the Radxa Rock 2 SoM with the Square baseboard. Add a dtsi for the SoM which can be included into the dts for the various baseboards (e.g. full and square) and a dts for the square board. Currently supported are serial console, wired networking, hdmi output, eMMC and SD storage and USB. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 11:43:33 +0300