Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2 core:
- sub-device framework routing improvements
- NV12M tiled variants added to v4l2_format_info
- some fixes at control handler freeing logic
- fixed H264 SEPARATE_COLOUR_PLANE check
- new staging driver: Intel IPU7 PCI
- Rockchip video decoder driver got promoted from staging
- iris: added HEVC/VP9 encoder/decoder support
- vsp1: driver has gained Renesas VSPX support
- uvc:
- switched to vb2 ioctl helpers
- added MSXU 1.5 metadata support
- atomisp: GC0310 sensor driver cleanups in preparation for moving it
out of staging
- Lots of cleanup, fixes and improvements
* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
media: rkvdec: Unstage the driver
media: rkvdec: Remove TODO file
media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
media: amphion: Support dmabuf and v4l2 buffer without binding
media: verisilicon: postproc: 4K support
media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
media: uvcvideo: Introduce dev->meta_formats
media: Documentation: Add note about UVCH length field
media: uvcvideo: Do not mark valid metadata as invalid
media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
media: core: export v4l2_translate_cmd
media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
media: uvcvideo: Remove stream->is_streaming field
media: uvcvideo: Split uvc_stop_streaming()
media: uvcvideo: Handle locks in uvc_queue_return_buffers
media: uvcvideo: Use vb2 ioctl and fop helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This broadly brings the assigned HW command queue support to iommufd.
This feature is used to improve SVA performance in VMs by avoiding
paravirtualization traps during SVA invalidations.
Along the way I think some of the core logic is in a much better state
to support future driver backed features.
Summary:
- IOMMU HW now has features to directly assign HW command queues to a
guest VM. In this mode the command queue operates on a limited set
of invalidation commands that are suitable for improving guest
invalidation performance and easy for the HW to virtualize.
This brings the generic infrastructure to allow IOMMU drivers to
expose such command queues through the iommufd uAPI, mmap the
doorbell pages, and get the guest physical range for the command
queue ring itself.
- An implementation for the NVIDIA SMMUv3 extension "cmdqv" is built
on the new iommufd command queue features. It works with the
existing SMMU driver support for cmdqv in guest VMs.
- Many precursor cleanups and improvements to support the above
cleanly, changes to the general ioctl and object helpers, driver
support for VDEVICE, and mmap pgoff cookie infrastructure.
- Sequence VDEVICE destruction to always happen before VFIO device
destruction. When using the above type features, and also in future
confidential compute, the internal virtual device representation
becomes linked to HW or CC TSM configuration and objects. If a VFIO
device is removed from iommufd those HW objects should also be
cleaned up to prevent a sort of UAF. This became important now that
we have HW backing the VDEVICE.
- Fix one syzkaller found error related to math overflows during iova
allocation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (57 commits)
iommu/arm-smmu-v3: Replace vsmmu_size/type with get_viommu_size
iommu/arm-smmu-v3: Do not bother impl_ops if IOMMU_VIOMMU_TYPE_ARM_SMMUV3
iommufd: Rename some shortterm-related identifiers
iommufd/selftest: Add coverage for vdevice tombstone
iommufd/selftest: Explicitly skip tests for inapplicable variant
iommufd/vdevice: Remove struct device reference from struct vdevice
iommufd: Destroy vdevice on idevice destroy
iommufd: Add a pre_destroy() op for objects
iommufd: Add iommufd_object_tombstone_user() helper
iommufd/viommu: Roll back to use iommufd_object_alloc() for vdevice
iommufd/selftest: Test reserved regions near ULONG_MAX
iommufd: Prevent ALIGN() overflow
iommu/tegra241-cmdqv: import IOMMUFD module namespace
iommufd: Do not allow _iommufd_object_alloc_ucmd if abort op is set
iommu/tegra241-cmdqv: Add IOMMU_VEVENTQ_TYPE_TEGRA241_CMDQV support
iommu/tegra241-cmdqv: Add user-space use support
iommu/tegra241-cmdqv: Do not statically map LVCMDQs
iommu/tegra241-cmdqv: Simplify deinit flow in tegra241_cmdqv_remove_vintf()
iommu/tegra241-cmdqv: Use request_threaded_irq
iommu/arm-smmu-v3-iommufd: Add hw_info to impl_ops
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle for docs, especially the build
system:
- The Perl kernel-doc script was added to 2.3.52pre1 just after the
turn of the millennium. Over the following 25 years, it accumulated
a vast amount of cruft, all in a language few people want to deal
with anymore. Mauro's Python replacement in 6.16 faithfully
reproduced all of the cruft in the hope of avoiding regressions.
Now that we have a more reasonable code base, though, we can work
on cleaning it up; many of the changes this time around are toward
that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository
links.
...and lots of fixes and updates"
* tag 'docs-6.17' of git://git.lwn.net/linux: (147 commits)
scripts: add origin commit identification based on specific patterns
sphinx: kernel_abi: fix performance regression with O=<dir>
Documentation: core-api: entry: Replace deprecated KVM entry/exit functions
docs: fault-injection: drop reference to md-faulty
docs: document linked lists
scripts: kdoc: make it backward-compatible with Python 3.7
docs: kernel-doc: emit warnings for ancient versions of Python
Documentation/rtla: Describe exit status
Documentation/rtla: Add include common_appendix.rst
docs: kernel: Clarify printk_ratelimit_burst reset behavior
Documentation: ioctl-number: Don't repeat macro names
Documentation: ioctl-number: Shorten macros table
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Documentation: ioctl-number: Extend "Include File" column width
Documentation: ioctl-number: Fix linuxppc-dev mailto link
overlayfs.rst: fix typos
docs: kdoc: emit a warning for ancient versions of Python
docs: kdoc: clean up check_sections()
docs: kdoc: directly access the always-there KdocItem fields
docs: kdoc: straighten up dump_declaration()
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
This also improves the phrasing of "an example" listing two examples.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702034500.124741-1-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Don't repeat mentioning macro names (_IO, _IOW, _IOR, and _IOWR) to
keep the wording effective.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250715024258.16882-3-bagasdotme@gmail.com
|
|
The macros table has three columns: the second one is "an" and the
third one writes "an ioctl with ... parameters". Simplify the table
by adding heading row that indicates macro name and accepted
parameters.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250715024258.16882-2-bagasdotme@gmail.com
|
|
Commit 03c9d1a5a30d93 ("Documentation: Fix description format for
powerpc RTAS ioctls") fixes Sphinx warning by chopping arch/ path
component of papr-physical-attestation.h to fit existing "Include File"
column. Now that the column has been widened just enough for that
header file, add back its arch/ path component.
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250714015711.14525-4-bagasdotme@gmail.com
|
|
Extend width of "Include File" column to fit full path to
papr-physical-attestation.h in later commit.
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250714015711.14525-3-bagasdotme@gmail.com
|
|
Spell out full Linux PPC mailing list address like other subsystem
mailing lists listed in the table.
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250714015711.14525-2-bagasdotme@gmail.com
|
|
With the introduction of the new object and its infrastructure, update the
doc to reflect that.
Link: https://patch.msgid.link/r/caa3ddc0d9bacf05c5b3e02c5f306ff3172cc54d.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The UVC driver provides two metadata types V4L2_META_FMT_UVC, and
V4L2_META_FMT_D4XX. The only difference between the two of them is that
V4L2_META_FMT_UVC only copies PTS, SCR, size and flags, and
V4L2_META_FMT_D4XX copies the whole metadata section.
Now we only enable V4L2_META_FMT_D4XX for the Intel D4xx family of
devices, but it is useful to have the whole metadata payload for any
device where vendors include other metadata, such as the one described by
Microsoft:
https://learn.microsoft.com/en-us/windows-hardware/drivers/stream/mf-capture-metadata
This patch introduces a new format V4L2_META_FMT_UVC_MSXU_1_5, that is
identical to V4L2_META_FMT_D4XX.
Let the user enable this format with a quirk for now. This way they can
test if their devices provide useful metadata without rebuilding the
kernel. They can later contribute patches to auto-quirk their devices.
We will also work in methods to auto-detect devices compatible with this
new metadata format.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-4-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The documentation currently describes the UVC length field as the "length
of the rest of the block", which can be misleading. The driver limits the
data copied to a maximum of 12 bytes.
This change adds a clarifying sentence to the documentation to make this
restriction explicit.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-2-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The CMA heap's name in devtmpfs can vary depending on how the heap is
defined. Its name defaults to "reserved", but if a CMA area is defined
in the devicetree, the heap takes on the devicetree node's name, such as
"default-pool" or "linux,cma". To simplify naming, unconditionally name
it "default_cma_region", but keep a legacy node in place backed by the
same underlying allocator for backwards compatibility.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20250610131231.1724627-4-jkangas@redhat.com
|
|
Code snippets should be wrapped in double backticks to follow
reStructuredText semantics; the use of single backticks uses the
:title-reference: role by default, which isn't quite what we want.
Add double backticks to code snippets to fix this.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20250610131231.1724627-2-jkangas@redhat.com
|
|
Document rx-no-low-drive and the new support to inject
glitches.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This driver has long outlived it's utility, and it's broken and unloved.
The main use case for this was direct mount with UDF of cd-rw drives
that required 32kb packets. It would collect writes into that size and
write them out in multiples of that. That's not a common use case
anymore, the world has moved on from those kinds of media. To make
matters worse, it's actively breaking setups where it's not even
required or useful.
Link: https://lore.kernel.org/linux-block/fxg6dksau4jsk3u5xldlyo2m7qgiux6vtdrz5rywseotsouqdv@urcrwz6qtd3r/
Link: https://lore.kernel.org/linux-block/dcc4836e-6da9-4208-ad27-bbd44b3a2063@kernel.dk/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Renesas Camera Receiver Unit in the RZ/V2H SoC can output RAW
data captured from an image sensor without conversion to an RGB/YUV
format. In that case the data are packed into 64-bit blocks, with a
variable amount of padding in the most significant bits depending on
the bitdepth of the data. Add new V4L2 pixel format codes for the new
formats, along with documentation to describe them.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250630222734.2712390-1-dan.scally@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix typos, punctuation and improve grammar and formatting in documentation
for Video4Linux (V4L).
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix a typo and improve wording and punctuation in
the documentation for Userspace API.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Link: https://lore.kernel.org/r/20250522115255.137450-4-hannelotta@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fix typos and improve grammar in the documentation for
fwctl subsystem.
Use the word user space consistently, instead of having
two variants (user space vs. userspace).
Change wording of denied behaviour to be disallowed
behaviour when describing the interface.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Link: https://lore.kernel.org/r/20250522115255.137450-3-hannelotta@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on LoongArch, covering
the vdso.
Link: https://lore.kernel.org/all/25bad37f-273e-4626-999c-e1890be96182@lucifer.local/
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
|
|
The present sbrmi module only support reporting power via hwmon.
However, AMD data center range of processors support various
system management functionality using custom protocols defined in
Advanced Platform Management Link (APML) specification.
Register a miscdevice, which creates a device /dev/sbrmiX with an IOCTL
interface for the user space to invoke the APML Mailbox protocol, which
is already defined in sbrmi_mailbox_xfer().
The APML protocols depend on a set of RMI registers. Having an IOCTL
as a single entry point will help in providing synchronization among
these protocols as multiple transactions on RMI register set may
create race condition.
Support for other protocols will be added in subsequent patches.
APML mailbox protocol returns additional error codes written by
SMU firmware in the out-bound register 0x37. These errors include,
invalid core, message not supported over platform and
others. This additional error codes can be used to provide more
details to user space.
Open-sourced and widely used https://github.com/amd/esmi_oob_library
will continue to provide user-space programmable API.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-7-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduction paragraph to the ioctl numbers table states that only
ioctls in up to ancient Linux kernel version (v2.6.31) for x86 arch are
listed. This is inaccurate as the table also lists ioctls from non-x86
archs and the kernel is continously developed (currently in v6.x).
Update the paragraph accordingly.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250508005838.8381-2-bagasdotme@gmail.com>
|
|
Add the file 'metafmt-c3-isp.rst' that documents
the meta format of c3-isp.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Much like device numbers that used to be assigned by LANANA (see commit
ebdf4040c16df5 ("Documentation: update the devices.txt documentation"),
ioctl numbers list is maintained by general kernel community nowadays
instead of contacting Michael directly as he's long stepped down from
kernel-related activity (his last LKML message was from 2003 [1] and
he's in CREDITS since the beginning of kernel's git history). Also,
patch (including one to update ioctl numbers list) submission now
follows process as described in
Documentation/process/submitting-patches.rst rather than sending
patches directly to Linus as in the distant past.
Update the docs to reflect that.
Link: https://lore.kernel.org/r/200305261446.h4QEkBVv023861@duracef.shout.net/ [1]
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250502074504.26933-2-bagasdotme@gmail.com>
|
|
Fix the description format for the following build warnings:
"Documentation/userspace-api/ioctl/ioctl-number.rst:369:
ERROR: Malformed table. Text in column margin in table line 301.
0xB2 03-05 arch/powerpc/include/uapi/asm/papr-indices.h
powerpc/pseries indices API
<mailto:linuxppc-dev>
0xB2 06-07 arch/powerpc/include/uapi/asm/papr-platform-dump.h
powerpc/pseries Platform Dump API
<mailto:linuxppc-dev>
0xB2 08 arch/powerpc/include/uapi/asm/papr-physical-attestation.h
powerpc/pseries Physical Attestation API
<mailto:linuxppc-dev>"
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Fixes: 43d869ac25f1 ("powerpc/pseries: Define papr_indices_io_block for papr-indices ioctls")
Fixes: 8aa9efc0be66 ("powerpc/pseries: Add papr-platform-dump character driver for dump retrieval")
Fixes: 86900ab620a4 ("powerpc/pseries: Add a char driver for physical-attestation RTAS")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Closes: https://lore.kernel.org/linux-next/20250429181707.7848912b@canb.auug.org.au/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250430022847.1118093-1-haren@linux.ibm.com
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
|
|
ibm,platform-dump RTAS call in combination with writable mapping
/dev/mem is issued to collect platform dump from the hypervisor
and may need multiple calls to get the complete dump. The current
implementation uses rtas_platform_dump() API provided by librtas
library to issue these RTAS calls. But /dev/mem access by the
user space is prohibited under system lockdown.
The solution should be to restrict access to RTAS function in user
space and provide kernel interfaces to collect dump. This patch
adds papr-platform-dump character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to obtain
the complete dump:
- Each dump will be identified by ID called dump tag.
- A sequence of RTAS calls have to be issued until retrieve the
complete dump. The hypervisor expects the first RTAS call with
the sequence 0 and the subsequent calls with the sequence
number returned from the previous calls.
- The hypervisor returns "dump complete" status once the complete
dump is retrieved. But expects one more RTAS call from the
partition with the NULL buffer to invalidate dump which means
the dump will be removed in the hypervisor.
- Sequence of calls are allowed with different dump IDs at the
same time but not with the same dump ID.
Expose these interfaces to user space with a /dev/papr-platform-dump
character device using the following programming model:
int devfd = open("/dev/papr-platform-dump", O_RDONLY);
int fd = ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE, &dump_id)
- Restrict user space to access with the same dump ID.
Typically we do not expect user space requests the dump
again for the same dump ID.
char *buf = malloc(size);
length = read(fd, buf, size);
- size should be minimum 1K based on PAPR and <= 4K based
on RTAS work area size. It will be restrict to RTAS work
area size. Using 4K work area based on the current
implementation in librtas library
- Each read call issue RTAS call to get the data based on
the size requirement and returns bytes returned from the
hypervisor
- If the previous call returns dump complete status, the
next read returns 0 like EOF.
ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
- RTAS call with NULL buffer to invalidates the dump.
The read API should use the file descriptor obtained from ioctl
based on dump ID so that gets dump contents for the corresponding
dump ID. Implemented support in librtas (rtas_platform_dump()) for
this new ABI to support system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-7-haren@linux.ibm.com
|
|
To issue ibm,get-indices, ibm,set-dynamic-indicator and
ibm,get-dynamic-sensor-state in the user space, the RMO buffer is
allocated for the work area which is restricted under system
lockdown. So instead of user space execution, the kernel will
provide /dev/papr-indices interface to execute these RTAS calls.
The user space assigns data in papr_indices_io_block struct
depends on the specific HCALL and passes to the following ioctls:
PAPR_INDICES_IOC_GET: Use for ibm,get-indices. Returns a
get-indices handle fd to read data.
PAPR_DYNAMIC_SENSOR_IOC_GET: Use for ibm,get-dynamic-sensor-state.
Updates the sensor state in
papr_indices_io_block.dynamic_param.state
PAPR_DYNAMIC_INDICATOR_IOC_SET: Use for ibm,set-dynamic-indicator.
Sets the new state for the input
indicator.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-3-haren@linux.ibm.com
|
|
Correct a typo in the mseal documentation.
Link: https://lkml.kernel.org/r/20250318115521.11654-1-takumaw1990@gmail.com
Signed-off-by: Takuma Watanabe <takumaw1990@gmail.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The rtnetlink family names are set to rt-$name within the YAML
but the files are called rt_$name. C codegen assumes that the
generated file name will match the family. The use of dashes
is in line with our general expectation that name properties
in the spec use dashes not underscores (even tho, as Donald
points out most genl families use underscores in the name).
We have 3 un-ideal options to choose from:
- accept the slight inconsistency with old families using _, or
- accept the slight annoyance with all languages having to do s/-/_/
when looking up family ID, or
- accept the inconsistency with all name properties in new YAML spec
being separated with - and just the family name always using _.
Pick option 1 and rename the rtnl spec files.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
10-bit buffers.
NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
NV12 and NV16, using 10-bit components with no padding between each
component. Instead, a group of 4 luminance/chrominance samples are
stored over 5 bytes in little endian order:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' and '20' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a
multiple of 8 for NV15 and 4 for NV20.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
The IBM CAPI (cxl) driver was removed in 6.15, not 6.14.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are
clearly linked to a device.
This is linked to the VIOMMU object and is intended to be used by a
VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered
through a simple FD returning event records on read().
- PASID support in VFIO.
The "Process Address Space ID" is a PCI feature that allows the
device to tag all PCI DMA operations with an ID. The IOMMU will
then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the
hypervisor to manage each PASID entry.
The support is generic so any VFIO user could attach any
translation to a PASID, and the support should work on ARM SMMUv3
as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate
what owns the various opaque owner fields"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits)
iommufd: Test attach before detaching pasid
iommufd: Fix iommu_vevent_header tables markup
iommu: Convert unreachable() to BUG()
iommufd: Balance veventq->num_events inc/dec
iommufd: Initialize the flags of vevent in iommufd_viommu_report_event()
iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO
iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability
vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices
ida: Add ida_find_first_range()
iommufd/selftest: Add coverage for iommufd pasid attach/detach
iommufd/selftest: Add test ops to test pasid attach/detach
iommufd/selftest: Add a helper to get test device
iommufd/selftest: Add set_dev_pasid in mock iommu
iommufd: Allow allocating PASID-compatible domain
iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support
iommufd: Enforce PASID-compatible domain for RID
iommufd: Support pasid attach/replace
iommufd: Enforce PASID-compatible domain in PASID path
iommufd/device: Add pasid_attach array to track per-PASID attach
...
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on s390, covering the
vdso.
[hca@linux.ibm.com: update supported architectures]
Link: https://lkml.kernel.org/r/20250317131917.1332402-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20250311123326.2686682-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update memory sealing documentation to include details about system
mappings.
Link: https://lkml.kernel.org/r/20250305021711.3867874-7-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Elliot Hughes <enh@google.com>
Cc: Florian Faineli <f.fainelli@gmail.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <mike.rapoport@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|