| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so
it supports arbitrary hart indices
- Add a command line parameter and related handling to disable the
generic RISCV IMSIC mechanism on platforms which use a trap-emulated
IMSIC. Unfortunatly this is required because there is no mechanism
available to discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend
variants.
- The usual cleanups and improvements all over the place
* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/riscv-imsic: Add kernel parameter to disable IPIs
irqchip/gic-v3: Fix GICD_CTLR register naming
irqchip/ls-scfg-msi: Fix NULL dereference in error handling
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Convert to __free
irqchip/alpine-msi: Convert to lock guards
irqchip/alpine-msi: Clean up whitespace style
irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
irqdomain: Add device pointer to irq_domain_info and msi_domain_info
irqchip/renesas-rzv2h: Remove unneeded includes
irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/aslint-sswi: Resolve hart index
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
Convert fsl,vf610-mscm-ir.txt to yaml format.
Additional changes:
- remove label at example dts.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724190342.1321632-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add fsl,icoll.yaml for i.MX23 and i.MX28.
Also add a generic fallback compatible string "fsl,icoll" for legacy
devices, which have existed for over 15 years.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250724164624.1271661-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add missing description for AMD/Xilinx interrupt controller. The binding is
used by Microblaze before dt-binding even existed but never been
documented properly.
IP acts as primary interrupt controller on Microblaze systems or can be
used as secondary interrupt controller on ARM based systems like Zynq,
ZynqMP, Versal or Versal Gen 2. Also as secondary interrupt controller on
Microblaze-V (Risc-V) systems.
Over the years IP exists in multiple variants based on attached bus as OPB,
PLB or AXI that's why generic filename is used.
Property xlnx,kind-of-intr is in hex because every bit position corresponds
to interrupt line. Controller support mixing edge or level interrupts
together and this is the property which distinguish them.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/2b9d4a3a693f501d420da88b8418732ba9def877.1753354675.git.michal.simek@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
interrupt controller
Add the DT binding documentation for Andes machine-level software
interrupt controller.
In the Andes platform such as QiLai SoC, the PLIC module is instantiated a
second time with all interrupt sources tied to zero as the software
interrupt controller (PLICSW). PLICSW can generate machine-level software
interrupts through programming its registers.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-5-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a new compatible string for Andes QiLai PLIC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://lore.kernel.org/r/20250711133025.2192404-4-ben717@andestech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the Applied Micro X-Gene MSI controller binding to DT schema
format. MSI controllers go in interrupt-controller directory so move the
schema there.
Link: https://lore.kernel.org/r/20250710180757.2970583-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add a compatible string for sysirq on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-2-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The GICv5 interrupt controller architecture is composed of:
- one or more Interrupt Routing Service (IRS)
- zero or more Interrupt Translation Service (ITS)
- zero or more Interrupt Wire Bridge (IWB)
Describe a GICv5 implementation by specifying a top level node
corresponding to the GICv5 system component.
IRS nodes are added as GICv5 system component children.
An ITS is associated with an IRS so ITS nodes are described
as IRS children - use the hierarchy explicitly in the device
tree to define the association.
IWB nodes are described as a separate schema.
An IWB is connected to a single ITS, the connection is made explicit
through the msi-parent property and therefore is not required to be
explicit through a parent-child relationship in the device tree.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-1-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As part of a larger effort to bring various PowerPC-related bindings
into the YAML world, this patch converts msi-pic.txt to YAML and moves
it into the bindings/interrupt-controller/ directory. The conversion may
necessarily be a bit hard to read because the binding is quite verbose.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250611-msipic-yaml-v2-1-f2e174c48802@posteo.net
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
According to existed dts arch/arm/boot/dts/armv7-m.dtsi and driver
drivers/irqchip/irq-nvic.c, compatible string should be arm,armv7m-nvic,
Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dtb: /interrupt-controller@e000e100:
failed to match any schema with compatible: ['arm,armv7m-nvic']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250624224630.2518776-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add ACLINT-SSWI variant for the MIPS P8700 SoC. This CPU has a SSWI device
compliant with the RISC-V draft spec (see [1]).
CPU indexes on this platform are not continuous, instead it uses bit-fields
to encode hart,core,cluster numbers, thus the DT property
"riscv,hart-indexes" is mandatory for it.
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/20250612143911.3224046-4-vladimir.kondratiev@mobileye.com
Link: https://github.com/riscvarchive/riscv-aclint [1]
|
|
Backmerging to forward to v6.16-rc1
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Pull OpenRISC updates from Stafford Horne:
"Just a few documentation updates from the community:
- Device tree documentation conversion from txt to yaml
- Documentation addition to help users getting started with initramfs
on OpenRISC
* tag 'for-linus' of https://github.com/openrisc/linux:
dt-bindings: interrupt-controller: Convert openrisc,ompic to DT schema
dt-bindings: interrupt-controller: Convert opencores,or1k-pic to DT schema
Documentation:openrisc: Add build instructions with initramfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull sophgo SoC devicetree updates from Arnd Bergmann:
"The Sophgo SG2044 SoC is their second generation server chip with 64
cores, following the SG2042.
In addition, there are minor updates for the cv180x SoCs"
* tag 'soc-newsoc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: sophgo: switch precise compatible for existed clock device for CV18XX
riscv: dts: sophgo: Add initial device tree of Sophgo SRD3-10
dt-bindings: riscv: sophgo: Add SG2044 compatible string
dt-bindings: interrupt-controller: Add Sophgo SG2044 PLIC
dt-bindings: interrupt-controller: Add Sophgo SG2044 CLINT mswi
riscv: dts: sopgho: use SOC_PERIPHERAL_IRQ to calculate interrupt number
riscv: dts: sophgo: rename header file cv18xx.dtsi to cv180x.dtsi
riscv: dts: sophgo: Move riscv cpu definition to a separate file
riscv: dts: sophgo: Move all soc specific device into soc dtsi file
riscv: sophgo: dts: Add spi controller for SG2042
riscv: dts: sophgo: sg2042: add pinctrl support
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
|
The SG2044 implement a standard T-HEAD C900 PLIC, which is
already supported by the kernel.
Add compatible string for Sophgo SG2044 plic.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As SG2044 also implements an enhanced ACLINT as SG2042, add necessary
compatible string for SG2044 SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250413223507.46480-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
controller
i.MX8qxp Display Controller has a built-in interrupt controller to support
Enable/Status/Preset/Clear interrupt bit.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-8-victor.liu@nxp.com
|
|
Convert the TI OMAP2/3 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
"ti,intc-size" property isn't actually used with "ti,omap2-intc", so the
2 bindings can be combined.
Link: https://lore.kernel.org/r/20250505144917.1294150-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI Wakeup Generator interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144913.1293967-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI Keystone 2 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144908.1293785-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TS-4800 FPGA interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144856.1293370-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the SPEAr3xx Shared interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144851.1293180-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Synopsys DW-APB interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144842.1292840-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ARC-HS incore interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144834.1292666-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ARC-HS Interrupt Distribution Unit interrupt controller
binding to schema format. It's a straight-forward conversion of the
typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144830.1292495-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Arc Core interrupt controller binding to schema format. It's
a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144826.1292329-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Qualcomm Atheros ath79 Misc interrupt controller binding to
schema format.
Adjust the compatible values to match what's actually in use.
Link: https://lore.kernel.org/r/20250505144821.1292151-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Qualcomm Atheros ath79 CPU interrupt controller binding to
schema format.
Link: https://lore.kernel.org/r/20250505144817.1291980-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell On-Die Message interrupt controller binding to
schema format.
Drop the 'interrupt-controller' property which isn't relevant for an MSI
controller.
Link: https://lore.kernel.org/r/20250505144727.1290271-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell ICU interrupt controller to DT schema format.
Add the missing addressing properties to read and translate child node
addresses.
Drop the legacy binding description and example.
Link: https://lore.kernel.org/r/20250505144524.1285795-1-robh@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell SEI interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144749.1290862-1-robh@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell GICP MSI controller binding to schema format. It's a
straight-forward conversion of the typical MSI controller.
Link: https://lore.kernel.org/r/20250505144721.1290068-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell 7K/8K PIC interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144715.1289866-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the TI-NSPIRE interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
'#interrupt-cells' was missing from the property list, but used in the
example, so add it.
Link: https://lore.kernel.org/r/20250505144711.1289677-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the J-Core advanced interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144707.1289503-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the ImgTec Powerdown Controller (PDC) interrupt controller
binding to schema format. It's a straight-forward conversion of the
typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144703.1289335-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Google Goldfish PIC interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144658.1289158-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the EZchip NPS interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144649.1288786-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the C-SKY Multi-processor interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
Link: https://lore.kernel.org/r/20250505144640.1288458-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the C-SKY APB interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144636.1288261-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Cirrus EP7209 interrupt controller binding to schema format.
It's a straight-forward conversion of the typical interrupt controller.
Link: https://lore.kernel.org/r/20250505144631.1288086-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Broadcom BCM6345 interrupt controller binding to schema
format.
The old schema indicated SoC specific compatibles should be present, but
there are none in use. So drop them.
The most number of CPUs on any platform seems to be 2, so document that
as the maximum.
Link: https://lore.kernel.org/r/20250505144622.1287712-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
