| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove Somnath Kotur from maintainers for be2net driver.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260122205020.26743-1-ajit.khaparde@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Fix race condition leading to null pointer dereference on ThinkPad
* tag 'leds-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: led-class: Only Add LED to leds_list when it is fully ready
|
|
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Internal error: Oops: 0000000096000005 [#1] SMP
[ 10.460721] Modules linked in:
[ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT
[ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT)
[ 10.479793] Workqueue: events work_for_cpu_fn
[ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.491124] pc : rvu_sdp_init+0x18/0x114
[ 10.495051] lr : rvu_probe+0xe58/0x1d18
Fixes: 997814491cee ("Octeontx2-af: Fetch MAC channel info from firmware")
Fixes: 5f21226b79fd ("Octeontx2-pf: ethtool: support multi advertise mode")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260121094819.2566786-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add()
to reject duplicate registration attempts.
Previously, if a caller attempted to register the same pin multiple
times (with the same ops, priv, and cookie) on the same device, the core
silently increments the reference count and return success. This behavior
is incorrect because if the caller makes these duplicate registrations
then for the first one dpll_pin_registration is allocated and for others
the associated dpll_pin_ref.refcount is incremented. During the first
unregistration the associated dpll_pin_registration is freed and for
others WARN is fired.
Fix this by updating the logic to return `-EEXIST` if a matching
registration is found to enforce a strict "register once" policy.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130012.112606-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcf_ife_encode() must make sure ife_encode() does not return NULL.
syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166
CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101
tcf_ife_encode net/sched/act_ife.c:841 [inline]
tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877
tc_act include/net/tc_wrapper.h:130 [inline]
tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152
tcf_exts_exec include/net/pkt_cls.h:349 [inline]
mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:197 [inline]
__tcf_classify net/sched/cls_api.c:1764 [inline]
tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860
multiq_classify net/sched/sch_multiq.c:39 [inline]
multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66
dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147
__dev_xmit_skb net/core/dev.c:4262 [inline]
__dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798
Fixes: 295a6e06d21e ("net/sched: act_ife: Change to use ife module")
Reported-by: syzbot+5cf914f193dffde3bd3c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6970d61d.050a0220.706b.0010.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yotam Gigi <yotam.gi@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260121133724.3400020-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12bb ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stefano Garzarella says:
====================
vsock/virtio: fix TX credit handling
The original series was posted by Melbin K Mathew <mlbnkm1@gmail.com> till v4.
Since it's a real issue and the original author seems busy, I'm sending
the new version fixing my comments but keeping the authorship (and restoring
mine on patch 2 as reported on v4).
v5: https://lore.kernel.org/netdev/20260116201517.273302-1-sgarzare@redhat.com/
v4: https://lore.kernel.org/netdev/20251217181206.3681159-1-mlbnkm1@gmail.com/
From Melbin K Mathew <mlbnkm1@gmail.com>:
This series fixes TX credit handling in virtio-vsock:
Patch 1: Fix potential underflow in get_credit() using s64 arithmetic
Patch 2: Fix vsock_test seqpacket bounds test
Patch 3: Cap TX credit to local buffer size (security hardening)
Patch 4: Add stream TX credit bounds regression test
The core issue is that a malicious guest can advertise a huge buffer
size via SO_VM_SOCKETS_BUFFER_SIZE, causing the host to allocate
excessive sk_buff memory when sending data to that guest.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process.
With this series applied, the same PoC shows only ~35 MiB increase in
Slab/SUnreclaim, no host OOM, and the guest remains responsive.
====================
Link: https://patch.msgid.link/20260121093628.9941-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-4-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-2-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+
Fixes: 62b5bb7be7bc ("net: fec: update MAX_FL based on the current MTU")
Fixes: d466c16026e9 ("net: fec: enable the Jumbo frame support for i.MX8QM")
Fixes: 59e9bf037d75 ("net: fec: add change_mtu to support dynamic buffer allocation")
Fixes: ec2a1681ed4f ("net: fec: use a member variable for maximum buffer size")
Signed-off-by: Clemens Gruber <mail@clemensgruber.at>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In ovs_vport_get_upcall_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics are already accumulated
by u64_stats_inc(). Fix this by reading them into temporary variables
first.
Fixes: 1933ea365aa7 ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260121072932.2360971-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix ARM64 port of the MSHV driver (Anirudh Rayabharam)
- Fix huge page handling in the MSHV driver (Stanislav Kinsburskii)
- Minor fixes to driver code (Julia Lawall, Michael Kelley)
* tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: handle gpa intercepts for arm64
mshv: add definitions for arm64 gpa intercepts
mshv: Add __user attribute to argument passed to access_ok()
mshv: Store the result of vfs_poll in a variable of type __poll_t
mshv: Align huge page stride with guest mapping
Drivers: hv: Always do Hyper-V panic notification in hv_kmsg_dump()
Drivers: hv: vmbus: fix typo in function name reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fix from Namhyung Kim:
"A minor fix for error handling in the event parser"
* tag 'perf-tools-fixes-for-v6.19-2026-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf parse-events: Fix evsel allocation failure
|
|
This commit adds error handling and rollback logic to
rvu_mbox_handler_attach_resources() to properly clean up partially
attached resources when rvu_attach_block() fails.
Fixes: 746ea74241fa0 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260121033934.1900761-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns out that 2500Base-X actually works fine with in-band status on
MediaTek's LynxI PCS -- I wrongly concluded it didn't because it is
broken in all the copper SFP modules and GPON sticks I used for testing.
Hence report LINK_INBAND_ENABLE also for 2500Base-X mode.
This reverts most of commit a003c38d9bbb ("net: pcs: pcs-mtk-lynxi:
correctly report in-band status capabilities").
The removal of the QSGMII interface mode was correct and is left
untouched.
Link: https://github.com/openwrt/openwrt/issues/21436
Fixes: a003c38d9bbb ("net: pcs: pcs-mtk-lynxi: correctly report in-band status capabilities")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b1cf26157b63fee838be09ae810497fb22fd8104.1768961746.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following:
BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet
which is reporting an issue with the reads and writes to ->last_tx_at in:
conn->peer->last_tx_at = ktime_get_seconds();
and:
keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;
The lockless accesses to these to values aren't actually a problem as the
read only needs an approximate time of last transmission for the purposes
of deciding whether or not the transmission of a keepalive packet is
warranted yet.
Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit
arch.
Fix both of these by switching to an unsigned int for ->last_tx_at and only
storing the LSW of the time64_t. It can then be reconstructed at need
provided no more than 68 years has elapsed since the last transmission.
Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive")
Reported-by: syzbot+6182afad5045e6703b3d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/695e7cfb.050a0220.1c677c.036b.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/1107124.1768903985@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-20 (ice, idpf)
For ice:
Cody Haas breaks dependency of needing both RSS key and LUT for
ice_get_rxfh() as ethtool ioctls do not always supply both.
Paul fixes issues related to devlink reload; adding missing deinit HW
call and moving hwmon exit function to the proper call chain.
For idpf:
Mina Almasry moves a register read call into the time sandwich to ensure
the register is properly flushed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: read lower clock bits inside the time sandwich
ice: fix devlink reload call trace
ice: add missing ice_deinit_hw() in devlink reinit path
ice: Fix persistent failure in ice_get_rxfh
====================
Link: https://patch.msgid.link/20260120224430.410377-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Fixes: 3f9bb0301d50 ("net: dsa: make dp->bridge_num one-based")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260120211039.3228999-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee7d ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Fixes: 58deb77cc52d ("bonding: balance ICMP echoes in layer3+4 mode")
Reported-by: syzbot+c46409299c70a221415e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/696faa23.050a0220.4cb9c.001f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matteo Croce <mcroce@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260120161744.1893263-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a54 ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit eeecf5d3a3a484cedfa3f2f87e6d51a7390ed960.
This change lead to MHI WWAN device can't connect to internet.
I found a netwrok issue with kernel 6.19-rc4, but network works
well with kernel 6.18-rc1. After checking, this commit is the
root cause.
Before appliing this serial changes on MHI WWAN network, we shall
revert this change in case of v6.19 being impacted.
Fixes: eeecf5d3a3a4 ("net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260120072018.29375-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- A stable fix for kmalloc_nolock() in non-preemptible contexts on
PREEMPT_RT (Swaraj Gaikwad)
* tag 'slab-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix kmalloc_nolock() context check for PREEMPT_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- protect reading super block vs setting block size externally (found
by syzbot)
- make sure no transaction is started in read-only mode even with some
rescue mount option combinations
- fix checksum calculation of backup super blocks when block-group-tree
is enabled
- more extensive mount-time checks of device items that could be left
after device replace and attempting degraded mount
- fix build warning with -Wmaybe-uninitialized on loongarch64-gcc 12
* tag 'for-6.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add extra device item checks at mount
btrfs: fix missing fields in superblock backup with BLOCK_GROUP_TREE
btrfs: reject new transactions if the fs is fully read-only
btrfs: sync read disk super and set block size
btrfs: fix Wmaybe-uninitialized warning in replay_one_buffer()
|
|
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled.
Fixes: af92793e52c3 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Reported-by: syzbot+b1546ad4a95331b2101e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b1546ad4a95331b2101e
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260113150639.48407-1-swarajgaikwad1925@gmail.co
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.19
Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
* tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
arm64: dts: qcom: sc8280xp: Add missing VDD_MXC links
pmdomain: qcom: rpmhpd: Add MXC to SC8280XP
dt-bindings: power: qcom,rpmpd: Add SC8280XP_MXC_AO
arm64: dts qcom: sdm845-oneplus-enchilada: Specify panel name within the compatible
mailmap: Update email address for Abel Vesa
arm64: dts: qcom: talos: Correct UFS clocks ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In nr_route_frame(), old_skb is immediately freed without checking if
nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,
the caller function will free old_skb again, causing a double-free bug.
Therefore, to prevent this, we need to modify it to check whether
nr_neigh->ax25 is NULL before freeing old_skb.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+999115c3bf275797dc27@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69694d6f.050a0220.58bed.0029.GAE@google.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20260119063359.10604-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce290151 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The usbnet driver initializes net->max_mtu to ETH_MAX_MTU before calling
the device's bind() callback. When the bind() callback sets
dev->hard_mtu based the device's actual capability (from CDC Ethernet's
wMaxSegmentSize descriptor), max_mtu is never updated to reflect this
hardware limitation).
This allows userspace (DHCP or IPv6 RA) to configure MTU larger than the
device can handle, leading to silent packet drops when the backend sends
packet exceeding the device's buffer size.
Fix this by limiting net->max_mtu to the device's hard_mtu after the
bind callback returns.
See https://gitlab.com/qemu-project/qemu/-/issues/3268 and
https://bugs.passt.top/attachment.cgi?bugid=189
Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://bugs.passt.top/show_bug.cgi?id=189
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260119075518.2774373-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659
Fixes: 49b99da2c9ce ("ipv6: add IFLA_INET6_RA_MTU to expose mtu value")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rocco Yue <rocco.yue@mediatek.com>
Link: https://patch.msgid.link/20260118152941.2563857-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->work can re read locklessly in mISDN_read()
and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations.
BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read
write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1:
misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline]
mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xce/0x140 fs/ioctl.c:583
__x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583
x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0:
mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112
do_loop_readv_writev fs/read_write.c:847 [inline]
vfs_readv+0x3fb/0x690 fs/read_write.c:1020
do_readv+0xe7/0x210 fs/read_write.c:1080
__do_sys_readv fs/read_write.c:1165 [inline]
__se_sys_readv fs/read_write.c:1162 [inline]
__x64_sys_readv+0x45/0x50 fs/read_write.c:1162
x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000 -> 0x00000001
Fixes: 1b2b03f8e514 ("Add mISDN core files")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260118132528.2349573-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aae8 ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
fix some bugs in the flow director of HNS3 driver
This patchset fixes two bugs in the flow director:
1. Incorrect definition of HCLGE_FD_AD_COUNTER_NUM_M
2. Incorrect assignment of HCLGE_FD_AD_NXT_KEY
====================
Link: https://patch.msgid.link/20260119132840.410513-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use next_input_key instead of counter_id to set HCLGE_FD_AD_NXT_KEY.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HCLGE_FD_AD_COUNTER_NUM_M should be at GENMASK(19, 13),
rather than at GENMASK(20, 13), because bit 20 is
HCLGE_FD_AD_NXT_STEP_B.
This patch corrects the wrong definition.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tao Wang reports that sometimes, after resume, stmmac can watchdog:
NETDEV WATCHDOG: CPU: x: transmit queue x timed out xx ms
When this occurs, the DMA transmit descriptors contain:
eth0: 221 [0x0000000876d10dd0]: 0x73660cbe 0x8 0x42 0xb04416a0
eth0: 222 [0x0000000876d10de0]: 0x77731d40 0x8 0x16a0 0x90000000
where descriptor 221 is the TSO header and 222 is the TSO payload.
tdes3 for descriptor 221 (0xb04416a0) has both bit 29 (first
descriptor) and bit 28 (last descriptor) set, which is incorrect.
The following packet also has bit 28 set, but isn't marked as a
first descriptor, and this causes the transmit DMA to stall.
This occurs because stmmac_tso_allocator() populates the first
descriptor, but does not set .last_segment correctly. There are two
places where this matters: one is later in stmmac_tso_xmit() where
we use it to update the TSO header descriptor. The other is in the
ring/chain mode clean_desc3() which is a performance optimisation.
Rather than using tx_q->tx_skbuff_dma[].last_segment to determine
whether the first descriptor entry is the only segment, calculate the
number of descriptor entries used. If there is only one descriptor,
then the first is also the last, so mark it as such.
Further work will be necessary to either eliminate .last_segment
entirely or set it correctly. Code analysis also indicates that a
similar issue exists with .is_jumbo. These will be the subject of
a future patch.
Reported-by: Tao Wang <tao03.wang@horizon.auto>
Fixes: c2837423cb54 ("net: stmmac: Rework TX Coalesce logic")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vhq8O-00000005N5s-0Ke5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In be_get_new_eqd(), statistics of pkts, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. Before the commit in question, these statistics were retrieved
one by one directly from queues. Fix this by reading them into temporary
variables first.
Fixes: 209477704187 ("be2net: set interrupt moderation for Skyhawk-R using EQ-DB")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260119153440.1440578-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In idpf_net_dim(), some statistics protected by u64_stats_sync, are read
and accumulated in ignorance of possible u64_stats_fetch_retry() events.
The correct way to copy statistics is already illustrated by
idpf_add_queue_stats(). Fix this by reading them into temporary variables
first.
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260119162720.1463859-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In hns3_fetch_stats(), ring statistics, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. These statistics are already accumulated by
hns3_ring_stats_update(). Fix this by reading them into a temporary
buffer first.
Fixes: b20d7fe51e0d ("net: hns3: add some statitics info to tx process")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260119160759.1455950-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This tool is built by default, but was not being installed by default
when running `make install`. Fix this by calling ynltool's install
target.
Signed-off-by: Michel Lind <michel@michel-slm.name>
Link: https://patch.msgid.link/aWqr9gUT4hWZwwcI@mbp-m3-fedora.vm
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NFC stack in Linux is in poor shape, with several bugs being discovered
last years via fuzzing, not much new development happening and limited
review and testing. It requires some more effort than drive-by reviews
I have been offering last one or two years.
I don't have much time nor business interests to keep looking at NFC,
so let's drop me from the maintainers to clearly indicate that more
hands are needed.
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260118094822.10126-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Automated review spotted am OF node reference count leakage when
checking if the 'leds' child node exists.
Call of_put_node() to correctly maintain the refcount.
Link: https://netdev-ai.bots.linux.dev/ai-review.html?id=20f173ba-0c64-422b-a663-fea4b4ad01d0
Fixes: 1758af47b98c1 ("net: phy: intel-xway: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/e3275e1c1cdca7e6426bb9c11f33bd84b8d900c8.1768783208.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a refcount leak in of_alias_scan()
- Support descending into child nodes when populating nodes
in /firmware
* tag 'devicetree-fixes-for-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix reference count leak in of_alias_scan()
of: platform: Use default match table for /firmware
|
