summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-06arm64: dts: imx8mp-debix-model-a: Use phy-modeFabio Estevam1-1/+1
The property 'phy-connection-type' can be used to describe the interface type between the Ethernet device and the Ethernet PHY device. However, snps,dwmac.yaml gives the following warning: imx8mp-debix-model-a.dtb: ethernet@30bf0000: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# To avoid the warning, switch to the more commonly used, 'phy-mode' property instead. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-nitrogen-r2: Fix I2C mux subnode nameFabio Estevam1-1/+1
Per i2c-mux-pca954x.yaml, the I2C subnodes should follow the 'i2c@' format. Change it to fix the following schema warning: imx8mm-nitrogen-r2.dtb: i2c-mux@70: Unevaluated properties are not allowed ('i2c3@0' was unexpected) from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names orderFabio Estevam1-1/+1
Per snps,dwmac.yaml, the interrupt-names entries should be in the following order: "macirq", "eth_wake_irq"; Change it to fix the following schema warnings. imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:0: 'macirq' was expected from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# imx8dxl-evk.dtb: ethernet@5b050000: interrupt-names:1: 'macirq' is not one of ['eth_wake_irq', 'eth_lpi'] from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-emcon-avari: Fix gpio-cellsFabio Estevam1-1/+1
Per nxp,pcf8575.yaml, #gpio-cells should be 2. Change it to fix the following schema warning: imx8mm-emcon-avari.dtb: gpio@3a: #gpio-cells:0:0: 2 was expected from schema $id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8qm-ss-dma: Pass lpuart dma-namesFabio Estevam1-0/+4
Per fsl-lpuart.yaml, when the 'dmas' property is used 'dma-names' should also be present. Pass the lpuart 'dma-names' property to fix the following schema warnings: imx8dxl-evk.dtb: serial@5a060000: dma-names:0: 'rx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# imx8dxl-evk.dtb: serial@5a060000: Unevaluated properties are not allowed ('dma-names' was unexpected) from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: Add SKOV IMX8MP CPU revB boardOleksij Rempel5-0/+935
Add Skov i.MX8MP based climate controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534Hugo Villeneuve1-0/+10
The following warning is shown when probing device: pca953x 1-0020: supply vcc not found, using dummy regulator Define a new fixed 3.3v regulator for carrier board peripherals, enabled by mosfet switch Q2 after the SOM_3V3 supply rises (no software control). Add this new regulator as vcc supply to the PCA9534 to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: introduce rve-gateway boardHugo Villeneuve2-0/+286
The RVE gateway board is based on a Variscite VAR-SOM-NANO, with a NXP MX8MN nano CPU. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: debix-som-a-bmb-08: Add CSI Power RegulatorsKieran Bingham1-0/+56
Provide the 1.8 and 3.3 volt regulators that are utilised on the Debix SOM BMB-08 base board. Facilitate this by also supplying the pin control used to enable the regulators on the second MIPI CSI port. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8-apalis: add can power-up delay on ixora boardAndrejs Cainikovs1-0/+2
Newer variants of Ixora boards require a power-up delay when powering up the CAN transceiver of up to 1ms. Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mn-var-som: add fixed 3.3V regulator for EEPROMHugo Villeneuve1-0/+9
When the EEPROM is probed, we have this warning: at24 0-0052: supply vcc not found, using dummy regulator Add fixed 3.3v regulator to silence the warning. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodesFabio Estevam3-27/+47
Several schema warnings are seen when running: make dtbs_check DT_SCHEMA_FILES=pci-bus.yaml Fix them. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp: Disable dsp reserved memory by defaultAlexander Stein1-0/+1
Even if the 'dsp' node is disabled the memory intended to be used by the DSP is reserved. This limits the memory range suitable for CMA allocation. Thus disable the dsp_reserved node. DSP users need to enable it in parallel to the 'dsp' node. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp: Add NPU NodeAdam Ford1-0/+21
The NPU is based on the Vivante GC8000 and its power-domain is controlled my pgc_mlmix. Since the power-domain uses some of these clocks, setup the clock parent and rates inside the power-domain, and add the NPU node. The data sheet states the CLK_ML_AHB should be 300MHz for nominal, but 800MHz clock will divide down to 266 instead. Boards which operate in over-drive mode should update the clocks on their boards accordingly. When the driver loads, the NPU numerates as: etnaviv-gpu 38500000.npu: model: GC8000, revision: 8002 Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: debix-som: Add heartbeat LEDKieran Bingham1-0/+22
Map the 'RUN' LED present on the Debix-SOM as a heartbeat. Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: freescale: Add dual-channel LVDS overlay for TQMa8MPxLAlexander Stein2-0/+79
This adds an overlay for the supported LVDS display AUO G133HAN01. Configure the video PLL frequency to exactly match typical pixel clock of 141.200 MHz. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06arm64: dts: imx8mp-venice-gw74xx: remove unecessary propreties in tpm nodeTim Harvey1-2/+0
Remove unnecessary #address-cells and #size-cells from tpm node. Fixes: 531936b218d8 ("arm64: dts: imx8mp-venice-gw74xx: update to revB PCB") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp-venice-gw72xx: add TPM deviceTim Harvey1-1/+9
Add the TPM device found on the GW72xx revision F PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mm-venice-gw72xx: add TPM deviceTim Harvey1-1/+9
Add the TPM device found on the GW72xx revision F PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: update anatop nodePeng Fan1-2/+3
The anatop module produces PLL and OSC for Clock Controller Module. Since the binding doc has been updated to clock-controller for this module, Let's also update the device tree node. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93-11x11-evk: add 12 ms delay to make sure the VDD_SD power offHaibo Chen1-0/+1
To support SD3.0 mode, according to the SD spec, a clean power off for the VDD_SD is keep the VDD_SD lower than 0.5V for at least 1ms. On imx93 board, gate off the VDD_SD, it will cost about 10ms to see the voltage change from 3.3v to 0.5v. So at least need to dealy 11ms to make sure a clean power off and power on. Here add 12ms dealy. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: change tuning start to get a large scan range for ↵Haibo Chen1-3/+3
standard tuning For original setting, the start point is 20, after the SION setting, ERR052021 can be workaround, but start point from 20 is too large, especially for the LD 133MHz case. Set the tuning start point as 1, tuning step as 2, so that, for the 40 times tuning logic, it can cover 1~81, its large and safe enough for all different devices like eMMC/SD/SDIO. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93-11x11-evk: set SION for cmd and data pad of USDHCHaibo Chen1-14/+16
imx93 pad integrate has one issue, refer to ERR052021: ERR052021 uSDHC: Sometimes uSDHC does not work under VDD_SOC low drive mode and nominal mode Description: uSDHC PADs have one integration issue. When CMD/DATA lines direction change from output to input, uSDHC controller begin sampling, the integration issue will make input enable signal from uSDHC propagated to the PAD with a long delay, thus the new input value on the pad comes to uSDHC lately. The uSDHC sampled the old input value and the sampling result is wrong. Workaround: Set uSDHC CMD/DATA PADs iomux register SION bit to 1, then PADs will propagate input to uSDHC with no delay, so correct value is sampled. This issue will wrongly trigger the start bit when sample the USDHC command response, cause the USDHC trigger command CRC/index/endbit error, which will finally impact the tuning pass window, espically will impact the standard tuning logic, and can't find a correct delay cell to get the best timing. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp: Describe M24C32-D write-lockable page in DH i.MX8MP DHCOM DTMarek Vasut1-0/+12
The i.MX8MP DHCOM SoM production rev.200 is populated with M24C32-D EEPROMs which have Additional Write lockable page at separate I2C address. Describe the page in DT to make it available. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp-beacon-kit: Enable DSI to HDMI BridgeAdam Ford1-0/+92
The baseboard of the Beacon i.MX8M Plus development kit has an ADV7535 DSI to HDMI bridge capable of stereo sound. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mm: Add CCM interruptsAlexander Stein1-0/+2
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mn: Add CCM interruptsAlexander Stein1-0/+2
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx8mp: Add CCM interruptsAlexander Stein1-0/+2
Add both CCM interrupts as mentioned in RM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: freescale: add initial device tree for MBa93xxCA starter kitAlexander Stein2-0/+710
This adds support for TQMa93xx module and MBa93xxCA starterkit mainboard. TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and secure element. TQMa93xxLA is a solder on type SOM and can be used on MBa93XXCA using an adapter. TQMa93xxCA is a feature compatible, socketable type SOM. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: freescale: tqma9352-mba93xxla: add 'chassis-type' propertyAlexander Stein1-0/+1
Add the chassis-type property to tqma9352-mba93xxla. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: Configure clock rate for audio PLLChancel Liu1-0/+2
Configure clock rate for audio PLL. There's one audio PLL on i.MX93. It is used as parent clock for clocks that are multiple of 8kHz. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-27arm64: dts: imx93: Add audio device nodesChancel Liu1-0/+87
Add audio devices nodes including SAI, MICFIL, XCVR and MQS. Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-11-13Linux 6.7-rc1v6.7-rc1Linus Torvalds1-2/+2
2023-11-12wifi: iwlwifi: fix system commands group orderingMiri Korenblit1-1/+1
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-12Merge tag 'parisc-for-6.7-rc1-2' of ↵Linus Torvalds3-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
2023-11-12Merge tag 'loongarch-6.7' of ↵Linus Torvalds13-63/+215
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
2023-11-12Merge tag 'powerpc-6.7-2' of ↵Linus Torvalds8-24/+24
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
2023-11-12Merge tag '6.7-rc-smb3-client-fixes-part2' of ↵Linus Torvalds16-88/+491
git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
2023-11-11Merge tag 'probes-fixes-v6.7-rc1' of ↵Linus Torvalds15-31/+25
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
2023-11-11Merge tag 'fbdev-for-6.7-rc1' of ↵Linus Torvalds18-110/+70
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
2023-11-11tracing/kprobes: Fix the order of argument descriptionsYujie Liu1-1/+1
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions") Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-11-11Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds97-812/+1760
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
2023-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds9-86/+78
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken MediaTek firmware: - Move the MediaTek GIC quirk handling from irqchip to core. Before the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware issues") temporarily addressed this issue. Fixed now at a deeper level in the arch code - Reject events meant for other PMUs in the CoreSight PMU driver, otherwise some of the core PMU events would disappear - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers, causing some events to be invisible - Remove duplicate declaration of __arm64_sys##name following the patch to avoid prototype warning for syscalls - Typos in the elf_hwcap documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/syscall: Remove duplicate declaration Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW" arm64: Move MediaTek GIC quirk handling from irqchip to core arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers perf: arm_cspmu: Reject events meant for other PMUs Documentation/arm64: Fix typos in elf_hwcaps
2023-11-10Merge tag 'sound-fix-6.7-rc1' of ↵Linus Torvalds18-51/+171
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes for rc1. The majority of changes are various ASoC driver-specific small fixes and usual HD-audio quirks, while there are a couple of core changes: a fix in ALSA core procfs code to avoid deadlocks at disconnection and an ASoC core fix for DAPM clock widgets" * tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: OSS: dmasound/paula: Convert to platform remove callback returning void ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus ALSA: info: Fix potential deadlock at disconnection ASoC: nau8540: Add self recovery to improve capture quility ALSA: hda/realtek: Add support dual speaker for Dell ALSA: hda: Add ASRock X670E Taichi to denylist ALSA: hda/realtek: Add quirk for ASUS UX7602ZM ASoC: SOF: sof-client: trivial: fix comment typo ASoC: dapm: fix clock get name ASoC: hdmi-codec: register hpd callback on component probe ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages ASoC: da7219: Improve system suspend and resume handling ASoC: codecs: Modify macro value error ASoC: codecs: Modify the wrong judgment of re value ASoC: codecs: Modify the maximum value of calib ASoC: amd: acp: fix for i2s mode register field update ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb() ASoC: rt712-sdca: fix speaker route missing issue ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
2023-11-10Merge tag 'amd-drm-next-6.7-2023-11-10' of ↵Daniel Vetter85-773/+1688
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
2023-11-10Merge tag 'spi-fix-v6.7-merge-window' of ↵Linus Torvalds3-17/+41
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of fixes that came in during the merge window: one Kconfig dependency fix and another fix for a long standing issue where a sync transfer races with system suspend" * tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix null dereference on suspend spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
2023-11-10Merge tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds8-8/+38
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix broken cache-flush support for Micron eMMCs - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards' MMC host: - sdhci_am654: Fix TAP value parsing for legacy speed mode - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750 - vub300: Fix an error path in probe" * tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER Revert "mmc: core: Capture correct oemid-bits for eMMC cards" mmc: vub300: fix an error code mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A mmc: sdhci_am654: fix start loop index for TAP value parsing
2023-11-10Merge tag 'pwm/for-6.7-rc1-fixes' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two very small fixes that I failed to include in the main pull request" * tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix double shift bug pwm: samsung: Fix a bit test in pwm_samsung_resume()
2023-11-10Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linuxLinus Torvalds6-45/+80
Pull io_uring fixes from Jens Axboe: "Mostly just a few fixes and cleanups caused by the read multishot support. Outside of that, a stable fix for how a connect retry is done" * tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux: io_uring: do not clamp read length for multishot read io_uring: do not allow multishot read to set addr or len io_uring: indicate if io_kbuf_recycle did recycle anything io_uring/rw: add separate prep handler for fixed read/write io_uring/rw: add separate prep handler for readv/writev io_uring/net: ensure socket is marked connected on connect retry io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
2023-11-10Merge tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linuxLinus Torvalds18-80/+72
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - nvme keyring config compile fixes (Hannes and Arnd) - fabrics keep alive fixes (Hannes) - tcp authentication fixes (Mark) - io_uring_cmd error handling fix (Anuj) - stale firmware attribute fix (Daniel) - tcp memory leak (Christophe) - crypto library usage simplification (Eric) - nbd use-after-free fix. May need a followup, but at least it's better than what it was before (Li) - Rate limit write on read-only device warnings (Yu) * tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux: nvme: keyring: fix conditional compilation nvme: common: make keyring and auth separate modules blk-core: use pr_warn_ratelimited() in bio_check_ro() nbd: fix uaf in nbd_open nvme: start keep-alive after admin queue setup nvme-loop: always quiesce and cancel commands before destroying admin q nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue() nvme-auth: always set valid seq_num in dhchap reply nvme-auth: add flag for bi-directional auth nvme-auth: auth success1 msg always includes resp nvme: fix error-handling for io_uring nvme-passthrough nvme: update firmware version after commit nvme-tcp: Fix a memory leak nvme-auth: use crypto_shash_tfm_digest()
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 13:37:40 +0300