diff options
Diffstat (limited to 'tools/tracing/rtla/tests')
| -rw-r--r-- | tools/tracing/rtla/tests/engine.sh | 86 | ||||
| -rw-r--r-- | tools/tracing/rtla/tests/hwnoise.t | 13 | ||||
| -rw-r--r-- | tools/tracing/rtla/tests/osnoise.t | 16 | ||||
| -rwxr-xr-x | tools/tracing/rtla/tests/scripts/check-priority.sh | 8 | ||||
| -rw-r--r-- | tools/tracing/rtla/tests/timerlat.t | 63 |
5 files changed, 164 insertions, 22 deletions
diff --git a/tools/tracing/rtla/tests/engine.sh b/tools/tracing/rtla/tests/engine.sh index 64d0446dc28e..a97d644ead99 100644 --- a/tools/tracing/rtla/tests/engine.sh +++ b/tools/tracing/rtla/tests/engine.sh @@ -8,16 +8,60 @@ test_begin() { [ -n "$TEST_COUNT" ] && echo "1..$TEST_COUNT" } +reset_osnoise() { + # Reset osnoise options to default and remove any dangling instances created + # by improperly exited rtla runs. + pushd /sys/kernel/tracing >/dev/null || return 1 + + # Remove dangling instances created by previous rtla run + echo 0 > tracing_thresh + cd instances + for i in osnoise_top osnoise_hist timerlat_top timerlat_hist + do + [ ! -d "$i" ] && continue + rmdir "$i" + done + + # Reset options to default + # Note: those are copied from the default values of osnoise_data + # in kernel/trace/trace_osnoise.c + cd ../osnoise + echo all > cpus + echo DEFAULTS > options + echo 1000000 > period_us + echo 0 > print_stack + echo 1000000 > runtime_us + echo 0 > stop_tracing_total_us + echo 0 > stop_tracing_us + echo 1000 > timerlat_period_us + + popd >/dev/null +} + check() { + test_name=$0 + tested_command=$1 + expected_exitcode=${3:-0} + expected_output=$4 # Simple check: run rtla with given arguments and test exit code. # If TEST_COUNT is set, run the test. Otherwise, just count. ctr=$(($ctr + 1)) if [ -n "$TEST_COUNT" ] then + # Reset osnoise options before running test. + [ "$NO_RESET_OSNOISE" == 1 ] || reset_osnoise # Run rtla; in case of failure, include its output as comment # in the test results. - result=$(stdbuf -oL $TIMEOUT "$RTLA" $2 2>&1); exitcode=$? - if [ $exitcode -eq 0 ] + result=$(eval stdbuf -oL $TIMEOUT "$RTLA" $2 2>&1); exitcode=$? + # Test if the results matches if requested + if [ -n "$expected_output" ] + then + grep -E "$expected_output" <<< "$result" > /dev/null; grep_result=$? + else + grep_result=0 + fi + + if [ $exitcode -eq $expected_exitcode ] && [ $grep_result -eq 0 ] then echo "ok $ctr - $1" else @@ -25,10 +69,40 @@ check() { # Add rtla output and exit code as comments in case of failure echo "$result" | col -b | while read line; do echo "# $line"; done printf "#\n# exit code %s\n" $exitcode + [ -n "$expected_output" ] && [ $grep_result -ne 0 ] && \ + printf "# Output match failed: \"%s\"\n" "$expected_output" fi fi } +check_with_osnoise_options() { + # Do the same as "check", but with pre-set osnoise options. + # Note: rtla should reset the osnoise options, this is used to test + # if it indeed does so. + # Save original arguments + arg1=$1 + arg2=$2 + arg3=$3 + + # Apply osnoise options (if not dry run) + if [ -n "$TEST_COUNT" ] + then + [ "$NO_RESET_OSNOISE" == 1 ] || reset_osnoise + shift + shift + while shift + do + [ "$1" == "" ] && continue + option=$(echo $1 | cut -d '=' -f 1) + value=$(echo $1 | cut -d '=' -f 2) + echo "option: $option, value: $value" + echo "$value" > "/sys/kernel/tracing/osnoise/$option" || return 1 + done + fi + + NO_RESET_OSNOISE=1 check "$arg1" "$arg2" "$arg3" +} + set_timeout() { TIMEOUT="timeout -v -k 15s $1" } @@ -37,6 +111,14 @@ unset_timeout() { unset TIMEOUT } +set_no_reset_osnoise() { + NO_RESET_OSNOISE=1 +} + +unset_no_reset_osnoise() { + unset NO_RESET_OSNOISE +} + test_end() { # If running without TEST_COUNT, tests are not actually run, just # counted. In that case, re-run the test with the correct count. diff --git a/tools/tracing/rtla/tests/hwnoise.t b/tools/tracing/rtla/tests/hwnoise.t index bbed17580537..23ce250a6852 100644 --- a/tools/tracing/rtla/tests/hwnoise.t +++ b/tools/tracing/rtla/tests/hwnoise.t @@ -6,16 +6,17 @@ test_begin set_timeout 2m check "verify help page" \ - "hwnoise --help" + "hwnoise --help" 0 "summary of hardware-related noise" check "detect noise higher than one microsecond" \ - "hwnoise -c 0 -T 1 -d 5s -q" + "hwnoise -c 0 -T 1 -d 5s -q" 0 check "set the automatic trace mode" \ - "hwnoise -a 5 -d 30s" + "hwnoise -a 5 -d 10s" 2 "osnoise hit stop tracing" check "set scheduling param to the osnoise tracer threads" \ - "hwnoise -P F:1 -c 0 -r 900000 -d 1M -q" + "hwnoise -P F:1 -c 0 -r 900000 -d 10s -q" check "stop the trace if a single sample is higher than 1 us" \ - "hwnoise -s 1 -T 1 -t -d 30s" + "hwnoise -s 1 -T 1 -t -d 10s" 2 "Saving trace to osnoise_trace.txt" check "enable a trace event trigger" \ - "hwnoise -t -e osnoise:irq_noise trigger=\"hist:key=desc,duration:sort=desc,duration:vals=hitcount\" -d 1m" + "hwnoise -t -e osnoise:irq_noise --trigger=\"hist:key=desc,duration:sort=desc,duration:vals=hitcount\" -d 10s" \ + 0 "Saving event osnoise:irq_noise hist to osnoise_irq_noise_hist.txt" test_end diff --git a/tools/tracing/rtla/tests/osnoise.t b/tools/tracing/rtla/tests/osnoise.t index 86596e547893..7574ec6a5a53 100644 --- a/tools/tracing/rtla/tests/osnoise.t +++ b/tools/tracing/rtla/tests/osnoise.t @@ -6,14 +6,20 @@ test_begin set_timeout 2m check "verify help page" \ - "osnoise --help" + "osnoise --help" 0 "osnoise version" check "verify the --priority/-P param" \ - "osnoise top -P F:1 -c 0 -r 900000 -d 1M -q" + "osnoise top -P F:1 -c 0 -r 900000 -d 10s -q" check "verify the --stop/-s param" \ - "osnoise top -s 30 -T 1 -t" + "osnoise top -s 30 -T 1" 2 "osnoise hit stop tracing" check "verify the --trace param" \ - "osnoise hist -s 30 -T 1 -t" + "osnoise hist -s 30 -T 1 -t" 2 "Saving trace to osnoise_trace.txt" check "verify the --entries/-E param" \ - "osnoise hist -P F:1 -c 0 -r 900000 -d 1M -b 10 -E 25" + "osnoise hist -P F:1 -c 0 -r 900000 -d 10s -b 10 -E 25" + +# Test setting default period by putting an absurdly high period +# and stopping on threshold. +# If default period is not set, this will time out. +check_with_osnoise_options "apply default period" \ + "osnoise hist -s 1" 2 period_us=600000000 test_end diff --git a/tools/tracing/rtla/tests/scripts/check-priority.sh b/tools/tracing/rtla/tests/scripts/check-priority.sh new file mode 100755 index 000000000000..79b702a34a96 --- /dev/null +++ b/tools/tracing/rtla/tests/scripts/check-priority.sh @@ -0,0 +1,8 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +pids="$(pgrep ^$1)" || exit 1 +for pid in $pids +do + chrt -p $pid | cut -d ':' -f 2 | head -n1 | grep "^ $2\$" >/dev/null + chrt -p $pid | cut -d ':' -f 2 | tail -n1 | grep "^ $3\$" >/dev/null +done && echo "Priorities are set correctly" diff --git a/tools/tracing/rtla/tests/timerlat.t b/tools/tracing/rtla/tests/timerlat.t index e86f40e5749e..c71aed5534bf 100644 --- a/tools/tracing/rtla/tests/timerlat.t +++ b/tools/tracing/rtla/tests/timerlat.t @@ -4,24 +4,69 @@ source tests/engine.sh test_begin set_timeout 2m +timerlat_sample_event='/sys/kernel/tracing/events/osnoise/timerlat_sample' +if ldd $RTLA | grep libbpf >/dev/null && [ -d "$timerlat_sample_event" ] +then + # rtla build with BPF and system supports BPF mode + no_bpf_options='0 1' +else + no_bpf_options='1' +fi + +# Do every test with and without BPF +for option in $no_bpf_options +do +export RTLA_NO_BPF=$option + +# Basic tests check "verify help page" \ - "timerlat --help" + "timerlat --help" 0 "timerlat version" check "verify -s/--stack" \ - "timerlat top -s 3 -T 10 -t" + "timerlat top -s 3 -T 10 -t" 2 "Blocking thread stack trace" check "verify -P/--priority" \ - "timerlat top -P F:1 -c 0 -d 1M -q" + "timerlat top -P F:1 -c 0 -d 10s -q -T 1 --on-threshold shell,command=\"tests/scripts/check-priority.sh timerlatu/ SCHED_FIFO 1\"" \ + 2 "Priorities are set correctly" check "test in nanoseconds" \ - "timerlat top -i 2 -c 0 -n -d 30s" + "timerlat top -i 2 -c 0 -n -d 10s" 2 "ns" check "set the automatic trace mode" \ - "timerlat top -a 5 --dump-tasks" + "timerlat top -a 5" 2 "analyzing it" +check "dump tasks" \ + "timerlat top -a 5 --dump-tasks" 2 "Printing CPU tasks" check "print the auto-analysis if hits the stop tracing condition" \ - "timerlat top --aa-only 5" + "timerlat top --aa-only 5" 2 check "disable auto-analysis" \ - "timerlat top -s 3 -T 10 -t --no-aa" + "timerlat top -s 3 -T 10 -t --no-aa" 2 check "verify -c/--cpus" \ - "timerlat hist -c 0 -d 30s" + "timerlat hist -c 0 -d 10s" check "hist test in nanoseconds" \ - "timerlat hist -i 2 -c 0 -n -d 30s" + "timerlat hist -i 2 -c 0 -n -d 10s" 2 "ns" + +# Actions tests +check "trace output through -t" \ + "timerlat hist -T 2 -t" 2 "^ Saving trace to timerlat_trace.txt$" +check "trace output through -t with custom filename" \ + "timerlat hist -T 2 -t custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "trace output through -A trace" \ + "timerlat hist -T 2 --on-threshold trace" 2 "^ Saving trace to timerlat_trace.txt$" +check "trace output through -A trace with custom filename" \ + "timerlat hist -T 2 --on-threshold trace,file=custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "exec command" \ + "timerlat hist -T 2 --on-threshold shell,command='echo TestOutput'" 2 "^TestOutput$" +check "multiple actions" \ + "timerlat hist -T 2 --on-threshold shell,command='echo -n 1' --on-threshold shell,command='echo 2'" 2 "^12$" +check "hist stop at failed action" \ + "timerlat hist -T 2 --on-threshold shell,command='echo -n 1; false' --on-threshold shell,command='echo -n 2'" 2 "^1# RTLA timerlat histogram$" +check "top stop at failed action" \ + "timerlat top -T 2 --on-threshold shell,command='echo -n 1; false' --on-threshold shell,command='echo -n 2'" 2 "^1ALL" +check "hist with continue" \ + "timerlat hist -T 2 -d 1s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "top with continue" \ + "timerlat top -q -T 2 -d 1s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "hist with trace output at end" \ + "timerlat hist -d 1s --on-end trace" 0 "^ Saving trace to timerlat_trace.txt$" +check "top with trace output at end" \ + "timerlat top -d 1s --on-end trace" 0 "^ Saving trace to timerlat_trace.txt$" +done test_end |