diff options
Diffstat (limited to 'tools/testing')
| -rwxr-xr-x | tools/testing/selftests/net/hsr/hsr_ping.sh | 188 | ||||
| -rw-r--r-- | tools/testing/selftests/net/hsr/settings | 2 |
2 files changed, 70 insertions, 120 deletions
diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh index 5a65f4f836be..ebee4a18fc67 100755 --- a/tools/testing/selftests/net/hsr/hsr_ping.sh +++ b/tools/testing/selftests/net/hsr/hsr_ping.sh @@ -27,31 +27,34 @@ while getopts "$optstring" option;do esac done -do_complete_ping_test() +do_ping_tests() { - echo "INFO: Initial validation ping." - # Each node has to be able each one. - do_ping "$ns1" 100.64.0.2 - do_ping "$ns2" 100.64.0.1 - do_ping "$ns3" 100.64.0.1 - stop_if_error "Initial validation failed." - - do_ping "$ns1" 100.64.0.3 - do_ping "$ns2" 100.64.0.3 - do_ping "$ns3" 100.64.0.2 + local netid="$1" - do_ping "$ns1" dead:beef:1::2 - do_ping "$ns1" dead:beef:1::3 - do_ping "$ns2" dead:beef:1::1 - do_ping "$ns2" dead:beef:1::2 - do_ping "$ns3" dead:beef:1::1 - do_ping "$ns3" dead:beef:1::2 + echo "INFO: Running ping tests." - stop_if_error "Initial validation failed." + echo "INFO: Initial validation ping." + # Each node has to be able to reach each one. + do_ping "$ns1" "100.64.$netid.2" + do_ping "$ns1" "100.64.$netid.3" + do_ping "$ns2" "100.64.$netid.1" + do_ping "$ns2" "100.64.$netid.3" + do_ping "$ns3" "100.64.$netid.1" + do_ping "$ns3" "100.64.$netid.2" + stop_if_error "Initial validation failed on IPv4." + + do_ping "$ns1" "dead:beef:$netid::2" + do_ping "$ns1" "dead:beef:$netid::3" + do_ping "$ns2" "dead:beef:$netid::1" + do_ping "$ns2" "dead:beef:$netid::2" + do_ping "$ns3" "dead:beef:$netid::1" + do_ping "$ns3" "dead:beef:$netid::2" + stop_if_error "Initial validation failed on IPv6." # Wait until supervisor all supervision frames have been processed and the node # entries have been merged. Otherwise duplicate frames will be observed which is # valid at this stage. + echo "INFO: Wait for node table entries to be merged." WAIT=5 while [ ${WAIT} -gt 0 ] do @@ -68,24 +71,28 @@ do_complete_ping_test() sleep 1 echo "INFO: Longer ping test." - do_ping_long "$ns1" 100.64.0.2 - do_ping_long "$ns1" dead:beef:1::2 - do_ping_long "$ns1" 100.64.0.3 - do_ping_long "$ns1" dead:beef:1::3 - - stop_if_error "Longer ping test failed." - - do_ping_long "$ns2" 100.64.0.1 - do_ping_long "$ns2" dead:beef:1::1 - do_ping_long "$ns2" 100.64.0.3 - do_ping_long "$ns2" dead:beef:1::2 - stop_if_error "Longer ping test failed." + do_ping_long "$ns1" "100.64.$netid.2" + do_ping_long "$ns1" "dead:beef:$netid::2" + do_ping_long "$ns1" "100.64.$netid.3" + do_ping_long "$ns1" "dead:beef:$netid::3" + stop_if_error "Longer ping test failed (ns1)." + + do_ping_long "$ns2" "100.64.$netid.1" + do_ping_long "$ns2" "dead:beef:$netid::1" + do_ping_long "$ns2" "100.64.$netid.3" + do_ping_long "$ns2" "dead:beef:$netid::3" + stop_if_error "Longer ping test failed (ns2)." + + do_ping_long "$ns3" "100.64.$netid.1" + do_ping_long "$ns3" "dead:beef:$netid::1" + do_ping_long "$ns3" "100.64.$netid.2" + do_ping_long "$ns3" "dead:beef:$netid::2" + stop_if_error "Longer ping test failed (ns3)." +} - do_ping_long "$ns3" 100.64.0.1 - do_ping_long "$ns3" dead:beef:1::1 - do_ping_long "$ns3" 100.64.0.2 - do_ping_long "$ns3" dead:beef:1::2 - stop_if_error "Longer ping test failed." +do_link_problem_tests() +{ + echo "INFO: Running link problem tests." echo "INFO: Cutting one link." do_ping_long "$ns1" 100.64.0.3 & @@ -104,26 +111,22 @@ do_complete_ping_test() do_ping_long "$ns1" 100.64.0.2 do_ping_long "$ns1" 100.64.0.3 - - stop_if_error "Failed with delay and packetloss." + stop_if_error "Failed with delay and packetloss (ns1)." do_ping_long "$ns2" 100.64.0.1 do_ping_long "$ns2" 100.64.0.3 - - stop_if_error "Failed with delay and packetloss." + stop_if_error "Failed with delay and packetloss (ns2)." do_ping_long "$ns3" 100.64.0.1 do_ping_long "$ns3" 100.64.0.2 - stop_if_error "Failed with delay and packetloss." - - echo "INFO: All good." + stop_if_error "Failed with delay and packetloss (ns3)." } setup_hsr_interfaces() { local HSRv="$1" - echo "INFO: preparing interfaces for HSRv${HSRv}." + echo "INFO: Preparing interfaces for HSRv${HSRv}." # Three HSR nodes. Each node has one link to each of its neighbour, two links in total. # # ns1eth1 ----- ns2eth1 @@ -140,17 +143,20 @@ setup_hsr_interfaces() ip link add ns3eth2 netns "$ns3" type veth peer name ns2eth2 netns "$ns2" # HSRv0/1 - ip -net "$ns1" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version $HSRv proto 0 - ip -net "$ns2" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 supervision 45 version $HSRv proto 0 - ip -net "$ns3" link add name hsr3 type hsr slave1 ns3eth1 slave2 ns3eth2 supervision 45 version $HSRv proto 0 + ip -net "$ns1" link add name hsr1 type hsr slave1 ns1eth1 \ + slave2 ns1eth2 supervision 45 version "$HSRv" proto 0 + ip -net "$ns2" link add name hsr2 type hsr slave1 ns2eth1 \ + slave2 ns2eth2 supervision 45 version "$HSRv" proto 0 + ip -net "$ns3" link add name hsr3 type hsr slave1 ns3eth1 \ + slave2 ns3eth2 supervision 45 version "$HSRv" proto 0 # IP for HSR ip -net "$ns1" addr add 100.64.0.1/24 dev hsr1 - ip -net "$ns1" addr add dead:beef:1::1/64 dev hsr1 nodad + ip -net "$ns1" addr add dead:beef:0::1/64 dev hsr1 nodad ip -net "$ns2" addr add 100.64.0.2/24 dev hsr2 - ip -net "$ns2" addr add dead:beef:1::2/64 dev hsr2 nodad + ip -net "$ns2" addr add dead:beef:0::2/64 dev hsr2 nodad ip -net "$ns3" addr add 100.64.0.3/24 dev hsr3 - ip -net "$ns3" addr add dead:beef:1::3/64 dev hsr3 nodad + ip -net "$ns3" addr add dead:beef:0::3/64 dev hsr3 nodad ip -net "$ns1" link set address 00:11:22:00:01:01 dev ns1eth1 ip -net "$ns1" link set address 00:11:22:00:01:02 dev ns1eth2 @@ -177,85 +183,33 @@ setup_hsr_interfaces() setup_vlan_interfaces() { ip -net "$ns1" link add link hsr1 name hsr1.2 type vlan id 2 - ip -net "$ns1" link add link hsr1 name hsr1.3 type vlan id 3 - ip -net "$ns1" link add link hsr1 name hsr1.4 type vlan id 4 - ip -net "$ns1" link add link hsr1 name hsr1.5 type vlan id 5 - ip -net "$ns2" link add link hsr2 name hsr2.2 type vlan id 2 - ip -net "$ns2" link add link hsr2 name hsr2.3 type vlan id 3 - ip -net "$ns2" link add link hsr2 name hsr2.4 type vlan id 4 - ip -net "$ns2" link add link hsr2 name hsr2.5 type vlan id 5 - ip -net "$ns3" link add link hsr3 name hsr3.2 type vlan id 2 - ip -net "$ns3" link add link hsr3 name hsr3.3 type vlan id 3 - ip -net "$ns3" link add link hsr3 name hsr3.4 type vlan id 4 - ip -net "$ns3" link add link hsr3 name hsr3.5 type vlan id 5 ip -net "$ns1" addr add 100.64.2.1/24 dev hsr1.2 - ip -net "$ns1" addr add 100.64.3.1/24 dev hsr1.3 - ip -net "$ns1" addr add 100.64.4.1/24 dev hsr1.4 - ip -net "$ns1" addr add 100.64.5.1/24 dev hsr1.5 + ip -net "$ns1" addr add dead:beef:2::1/64 dev hsr1.2 nodad ip -net "$ns2" addr add 100.64.2.2/24 dev hsr2.2 - ip -net "$ns2" addr add 100.64.3.2/24 dev hsr2.3 - ip -net "$ns2" addr add 100.64.4.2/24 dev hsr2.4 - ip -net "$ns2" addr add 100.64.5.2/24 dev hsr2.5 + ip -net "$ns2" addr add dead:beef:2::2/64 dev hsr2.2 nodad ip -net "$ns3" addr add 100.64.2.3/24 dev hsr3.2 - ip -net "$ns3" addr add 100.64.3.3/24 dev hsr3.3 - ip -net "$ns3" addr add 100.64.4.3/24 dev hsr3.4 - ip -net "$ns3" addr add 100.64.5.3/24 dev hsr3.5 + ip -net "$ns3" addr add dead:beef:2::3/64 dev hsr3.2 nodad ip -net "$ns1" link set dev hsr1.2 up - ip -net "$ns1" link set dev hsr1.3 up - ip -net "$ns1" link set dev hsr1.4 up - ip -net "$ns1" link set dev hsr1.5 up - ip -net "$ns2" link set dev hsr2.2 up - ip -net "$ns2" link set dev hsr2.3 up - ip -net "$ns2" link set dev hsr2.4 up - ip -net "$ns2" link set dev hsr2.5 up - ip -net "$ns3" link set dev hsr3.2 up - ip -net "$ns3" link set dev hsr3.3 up - ip -net "$ns3" link set dev hsr3.4 up - ip -net "$ns3" link set dev hsr3.5 up } -hsr_vlan_ping() { - do_ping "$ns1" 100.64.2.2 - do_ping "$ns1" 100.64.3.2 - do_ping "$ns1" 100.64.4.2 - do_ping "$ns1" 100.64.5.2 - - do_ping "$ns1" 100.64.2.3 - do_ping "$ns1" 100.64.3.3 - do_ping "$ns1" 100.64.4.3 - do_ping "$ns1" 100.64.5.3 - - do_ping "$ns2" 100.64.2.1 - do_ping "$ns2" 100.64.3.1 - do_ping "$ns2" 100.64.4.1 - do_ping "$ns2" 100.64.5.1 - - do_ping "$ns2" 100.64.2.3 - do_ping "$ns2" 100.64.3.3 - do_ping "$ns2" 100.64.4.3 - do_ping "$ns2" 100.64.5.3 - - do_ping "$ns3" 100.64.2.1 - do_ping "$ns3" 100.64.3.1 - do_ping "$ns3" 100.64.4.1 - do_ping "$ns3" 100.64.5.1 - - do_ping "$ns3" 100.64.2.2 - do_ping "$ns3" 100.64.3.2 - do_ping "$ns3" 100.64.4.2 - do_ping "$ns3" 100.64.5.2 +run_complete_ping_tests() +{ + echo "INFO: Running complete ping tests." + do_ping_tests 0 + do_link_problem_tests } -run_vlan_tests() { +run_vlan_tests() +{ vlan_challenged_hsr1=$(ip net exec "$ns1" ethtool -k hsr1 | grep "vlan-challenged" | awk '{print $2}') vlan_challenged_hsr2=$(ip net exec "$ns2" ethtool -k hsr2 | grep "vlan-challenged" | awk '{print $2}') vlan_challenged_hsr3=$(ip net exec "$ns3" ethtool -k hsr3 | grep "vlan-challenged" | awk '{print $2}') @@ -263,27 +217,23 @@ run_vlan_tests() { if [[ "$vlan_challenged_hsr1" = "off" || "$vlan_challenged_hsr2" = "off" || "$vlan_challenged_hsr3" = "off" ]]; then echo "INFO: Running VLAN tests" setup_vlan_interfaces - hsr_vlan_ping + do_ping_tests 2 else echo "INFO: Not Running VLAN tests as the device does not support VLAN" fi } check_prerequisites -setup_ns ns1 ns2 ns3 - trap cleanup_all_ns EXIT +setup_ns ns1 ns2 ns3 setup_hsr_interfaces 0 -do_complete_ping_test - +run_complete_ping_tests run_vlan_tests setup_ns ns1 ns2 ns3 - setup_hsr_interfaces 1 -do_complete_ping_test - +run_complete_ping_tests run_vlan_tests exit $ret diff --git a/tools/testing/selftests/net/hsr/settings b/tools/testing/selftests/net/hsr/settings index 0fbc037f2aa8..ba4d85f74cd6 100644 --- a/tools/testing/selftests/net/hsr/settings +++ b/tools/testing/selftests/net/hsr/settings @@ -1 +1 @@ -timeout=50 +timeout=90 |