1 files changed, 371 insertions, 0 deletions
diff --git a/tools/testing/selftests/powerpc/tm/tm-unavailable.c b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
new file mode 100644
index 000000000000..96c37f84ce54
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright 2017, Gustavo Romero, Breno Leitao, Cyril Bur, IBM Corp.
+ * Licensed under GPLv2.
+ *
+ * Force FP, VEC and VSX unavailable exception during transaction in all
+ * possible scenarios regarding the MSR.FP and MSR.VEC state, e.g. when FP
+ * is enable and VEC is disable, when FP is disable and VEC is enable, and
+ * so on. Then we check if the restored state is correctly set for the
+ * FP and VEC registers to the previous state we set just before we entered
+ * in TM, i.e. we check if it corrupts somehow the recheckpointed FP and
+ * VEC/Altivec registers on abortion due to an unavailable exception in TM.
+ * N.B. In this test we do not test all the FP/Altivec/VSX registers for
+ * corruption, but only for registers vs0 and vs32, which are respectively
+ * representatives of FP and VEC/Altivec reg sets.
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <stdbool.h>
+#include <pthread.h>
+#include <sched.h>
+
+#include "tm.h"
+
+#define DEBUG 0
+
+/* Unavailable exceptions to test in HTM */
+#define FP_UNA_EXCEPTION	0
+#define VEC_UNA_EXCEPTION	1
+#define VSX_UNA_EXCEPTION	2
+
+#define NUM_EXCEPTIONS		3
+
+struct Flags {
+	int touch_fp;
+	int touch_vec;
+	int result;
+	int exception;
+} flags;
+
+bool expecting_failure(void)
+{
+	if (flags.touch_fp && flags.exception == FP_UNA_EXCEPTION)
+		return false;
+
+	if (flags.touch_vec && flags.exception == VEC_UNA_EXCEPTION)
+		return false;
+
+	/*
+	 * If both FP and VEC are touched it does not mean that touching VSX
+	 * won't raise an exception. However since FP and VEC state are already
+	 * correctly loaded, the transaction is not aborted (i.e.
+	 * treclaimed/trecheckpointed) and MSR.VSX is just set as 1, so a TM
+	 * failure is not expected also in this case.
+	 */
+	if ((flags.touch_fp && flags.touch_vec) &&
+	     flags.exception == VSX_UNA_EXCEPTION)
+		return false;
+
+	return true;
+}
+
+/* Check if failure occurred whilst in transaction. */
+bool is_failure(uint64_t condition_reg)
+{
+	/*
+	 * When failure handling occurs, CR0 is set to 0b1010 (0xa). Otherwise
+	 * transaction completes without failure and hence reaches out 'tend.'
+	 * that sets CR0 to 0b0100 (0x4).
+	 */
+	return ((condition_reg >> 28) & 0xa) == 0xa;
+}
+
+void *ping(void *input)
+{
+
+	/*
+	 * Expected values for vs0 and vs32 after a TM failure. They must never
+	 * change, otherwise they got corrupted.
+	 */
+	uint64_t high_vs0 = 0x5555555555555555;
+	uint64_t low_vs0 = 0xffffffffffffffff;
+	uint64_t high_vs32 = 0x5555555555555555;
+	uint64_t low_vs32 = 0xffffffffffffffff;
+
+	/* Counter for busy wait */
+	uint64_t counter = 0x1ff000000;
+
+	/*
+	 * Variable to keep a copy of CR register content taken just after we
+	 * leave the transactional state.
+	 */
+	uint64_t cr_ = 0;
+
+	/*
+	 * Wait a bit so thread can get its name "ping". This is not important
+	 * to reproduce the issue but it's nice to have for systemtap debugging.
+	 */
+	if (DEBUG)
+		sleep(1);
+
+	printf("If MSR.FP=%d MSR.VEC=%d: ", flags.touch_fp, flags.touch_vec);
+
+	if (flags.exception != FP_UNA_EXCEPTION &&
+	    flags.exception != VEC_UNA_EXCEPTION &&
+	    flags.exception != VSX_UNA_EXCEPTION) {
+		printf("No valid exception specified to test.\n");
+		return NULL;
+	}
+
+	asm (
+		/* Prepare to merge low and high. */
+		"	mtvsrd		33, %[high_vs0]		;"
+		"	mtvsrd		34, %[low_vs0]		;"
+
+		/*
+		 * Adjust VS0 expected value after an TM failure,
+		 * i.e. vs0 = 0x5555555555555555555FFFFFFFFFFFFFFFF
+		 */
+		"	xxmrghd		0, 33, 34		;"
+
+		/*
+		 * Adjust VS32 expected value after an TM failure,
+		 * i.e. vs32 = 0x5555555555555555555FFFFFFFFFFFFFFFF
+		 */
+		"	xxmrghd		32, 33, 34		;"
+
+		/*
+		 * Wait an amount of context switches so load_fp and load_vec
+		 * overflow and MSR.FP, MSR.VEC, and MSR.VSX become zero (off).
+		 */
+		"	mtctr		%[counter]		;"
+
+		/* Decrement CTR branch if CTR non zero. */
+		"1:	bdnz 1b					;"
+
+		/*
+		 * Check if we want to touch FP prior to the test in order
+		 * to set MSR.FP = 1 before provoking an unavailable
+		 * exception in TM.
+		 */
+		"	cmpldi		%[touch_fp], 0		;"
+		"	beq		no_fp			;"
+		"	fadd		10, 10, 10		;"
+		"no_fp:						;"
+
+		/*
+		 * Check if we want to touch VEC prior to the test in order
+		 * to set MSR.VEC = 1 before provoking an unavailable
+		 * exception in TM.
+		 */
+		"	cmpldi		%[touch_vec], 0		;"
+		"	beq		no_vec			;"
+		"	vaddcuw		10, 10, 10		;"
+		"no_vec:					;"
+
+		/*
+		 * Perhaps it would be a better idea to do the
+		 * compares outside transactional context and simply
+		 * duplicate code.
+		 */
+		"	tbegin.					;"
+		"	beq		trans_fail		;"
+
+		/* Do we do FP Unavailable? */
+		"	cmpldi		%[exception], %[ex_fp]	;"
+		"	bne		1f			;"
+		"	fadd		10, 10, 10		;"
+		"	b		done			;"
+
+		/* Do we do VEC Unavailable? */
+		"1:	cmpldi		%[exception], %[ex_vec]	;"
+		"	bne		2f			;"
+		"	vaddcuw		10, 10, 10		;"
+		"	b		done			;"
+
+		/*
+		 * Not FP or VEC, therefore VSX. Ensure this
+		 * instruction always generates a VSX Unavailable.
+		 * ISA 3.0 is tricky here.
+		 * (xxmrghd will on ISA 2.07 and ISA 3.0)
+		 */
+		"2:	xxmrghd		10, 10, 10		;"
+
+		"done:	tend. ;"
+
+		"trans_fail: ;"
+
+		/* Give values back to C. */
+		"	mfvsrd		%[high_vs0], 0		;"
+		"	xxsldwi		3, 0, 0, 2		;"
+		"	mfvsrd		%[low_vs0], 3		;"
+		"	mfvsrd		%[high_vs32], 32	;"
+		"	xxsldwi		3, 32, 32, 2		;"
+		"	mfvsrd		%[low_vs32], 3		;"
+
+		/* Give CR back to C so that it can check what happened. */
+		"	mfcr		%[cr_]		;"
+
+		: [high_vs0]  "+r" (high_vs0),
+		  [low_vs0]   "+r" (low_vs0),
+		  [high_vs32] "=r" (high_vs32),
+		  [low_vs32]  "=r" (low_vs32),
+		  [cr_]       "+r" (cr_)
+		: [touch_fp]  "r"  (flags.touch_fp),
+		  [touch_vec] "r"  (flags.touch_vec),
+		  [exception] "r"  (flags.exception),
+		  [ex_fp]     "i"  (FP_UNA_EXCEPTION),
+		  [ex_vec]    "i"  (VEC_UNA_EXCEPTION),
+		  [ex_vsx]    "i"  (VSX_UNA_EXCEPTION),
+		  [counter]   "r"  (counter)
+
+		: "cr0", "ctr", "v10", "vs0", "vs10", "vs3", "vs32", "vs33",
+		  "vs34", "fr10"
+
+		);
+
+	/*
+	 * Check if we were expecting a failure and it did not occur by checking
+	 * CR0 state just after we leave the transaction. Either way we check if
+	 * vs0 or vs32 got corrupted.
+	 */
+	if (expecting_failure() && !is_failure(cr_)) {
+		printf("\n\tExpecting the transaction to fail, %s",
+			"but it didn't\n\t");
+		flags.result++;
+	}
+
+	/* Check if we were not expecting a failure and a it occurred. */
+	if (!expecting_failure() && is_failure(cr_)) {
+		printf("\n\tUnexpected transaction failure 0x%02lx\n\t",
+			failure_code());
+		return (void *) -1;
+	}
+
+	/*
+	 * Check if TM failed due to the cause we were expecting. 0xda is a
+	 * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause.
+	 */
+	if (is_failure(cr_) && !failure_is_unavailable()) {
+		printf("\n\tUnexpected failure cause 0x%02lx\n\t",
+			failure_code());
+		return (void *) -1;
+	}
+
+	/* 0x4 is a success and 0xa is a fail. See comment in is_failure(). */
+	if (DEBUG)
+		printf("CR0: 0x%1lx ", cr_ >> 28);
+
+	/* Check FP (vs0) for the expected value. */
+	if (high_vs0 != 0x5555555555555555 || low_vs0 != 0xFFFFFFFFFFFFFFFF) {
+		printf("FP corrupted!");
+			printf("  high = %#16" PRIx64 "  low = %#16" PRIx64 " ",
+				high_vs0, low_vs0);
+		flags.result++;
+	} else
+		printf("FP ok ");
+
+	/* Check VEC (vs32) for the expected value. */
+	if (high_vs32 != 0x5555555555555555 || low_vs32 != 0xFFFFFFFFFFFFFFFF) {
+		printf("VEC corrupted!");
+			printf("  high = %#16" PRIx64 "  low = %#16" PRIx64,
+				high_vs32, low_vs32);
+		flags.result++;
+	} else
+		printf("VEC ok");
+
+	putchar('\n');
+
+	return NULL;
+}
+
+/* Thread to force context switch */
+void *pong(void *not_used)
+{
+	/* Wait thread get its name "pong". */
+	if (DEBUG)
+		sleep(1);
+
+	/* Classed as an interactive-like thread. */
+	while (1)
+		sched_yield();
+}
+
+/* Function that creates a thread and launches the "ping" task. */
+void test_fp_vec(int fp, int vec, pthread_attr_t *attr)
+{
+	int retries = 2;
+	void *ret_value;
+	pthread_t t0;
+
+	flags.touch_fp = fp;
+	flags.touch_vec = vec;
+
+	/*
+	 * Without luck it's possible that the transaction is aborted not due to
+	 * the unavailable exception caught in the middle as we expect but also,
+	 * for instance, due to a context switch or due to a KVM reschedule (if
+	 * it's running on a VM). Thus we try a few times before giving up,
+	 * checking if the failure cause is the one we expect.
+	 */
+	do {
+		/* Bind 'ping' to CPU 0, as specified in 'attr'. */
+		pthread_create(&t0, attr, ping, (void *) &flags);
+		pthread_setname_np(t0, "ping");
+		pthread_join(t0, &ret_value);
+		retries--;
+	} while (ret_value != NULL && retries);
+
+	if (!retries) {
+		flags.result = 1;
+		if (DEBUG)
+			printf("All transactions failed unexpectedly\n");
+
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int exception; /* FP = 0, VEC = 1, VSX = 2 */
+	pthread_t t1;
+	pthread_attr_t attr;
+	cpu_set_t cpuset;
+
+	/* Set only CPU 0 in the mask. Both threads will be bound to CPU 0. */
+	CPU_ZERO(&cpuset);
+	CPU_SET(0, &cpuset);
+
+	/* Init pthread attribute. */
+	pthread_attr_init(&attr);
+
+	/* Set CPU 0 mask into the pthread attribute. */
+	pthread_attr_setaffinity_np(&attr, sizeof(cpu_set_t), &cpuset);
+
+	pthread_create(&t1, &attr /* Bind 'pong' to CPU 0 */, pong, NULL);
+	pthread_setname_np(t1, "pong"); /* Name it for systemtap convenience */
+
+	flags.result = 0;
+
+	for (exception = 0; exception < NUM_EXCEPTIONS; exception++) {
+		printf("Checking if FP/VEC registers are sane after");
+
+		if (exception == FP_UNA_EXCEPTION)
+			printf(" a FP unavailable exception...\n");
+
+		else if (exception == VEC_UNA_EXCEPTION)
+			printf(" a VEC unavailable exception...\n");
+
+		else
+			printf(" a VSX unavailable exception...\n");
+
+		flags.exception = exception;
+
+		test_fp_vec(0, 0, &attr);
+		test_fp_vec(1, 0, &attr);
+		test_fp_vec(0, 1, &attr);
+		test_fp_vec(1, 1, &attr);
+
+	}
+
+	if (flags.result > 0) {
+		printf("result: failed!\n");
+		exit(1);
+	} else {
+		printf("result: success\n");
+		exit(0);
+	}
+}