diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/hw/nic_performance.py')
| -rw-r--r-- | tools/testing/selftests/drivers/net/hw/nic_performance.py | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/tools/testing/selftests/drivers/net/hw/nic_performance.py b/tools/testing/selftests/drivers/net/hw/nic_performance.py deleted file mode 100644 index 201403b76ea3..000000000000 --- a/tools/testing/selftests/drivers/net/hw/nic_performance.py +++ /dev/null @@ -1,137 +0,0 @@ -#!/usr/bin/env python3 -# SPDX-License-Identifier: GPL-2.0 - -#Introduction: -#This file has basic performance test for generic NIC drivers. -#The test comprises of throughput check for TCP and UDP streams. -# -#Setup: -#Connect the DUT PC with NIC card to partner pc back via ethernet medium of your choice(RJ45, T1) -# -# DUT PC Partner PC -#┌───────────────────────┐ ┌──────────────────────────┐ -#│ │ │ │ -#│ │ │ │ -#│ ┌───────────┐ │ │ -#│ │DUT NIC │ Eth │ │ -#│ │Interface ─┼─────────────────────────┼─ any eth Interface │ -#│ └───────────┘ │ │ -#│ │ │ │ -#│ │ │ │ -#└───────────────────────┘ └──────────────────────────┘ -# -#Configurations: -#To prevent interruptions, Add ethtool, ip to the sudoers list in remote PC and get the ssh key from remote. -#Required minimum ethtool version is 6.10 -#Change the below configuration based on your hw needs. -# """Default values""" -#time_delay = 8 #time taken to wait for transitions to happen, in seconds. -#test_duration = 10 #performance test duration for the throughput check, in seconds. -#send_throughput_threshold = 80 #percentage of send throughput required to pass the check -#receive_throughput_threshold = 50 #percentage of receive throughput required to pass the check - -import time -import json -import argparse -from lib.py import ksft_run, ksft_exit, ksft_pr, ksft_true -from lib.py import KsftFailEx, KsftSkipEx, GenerateTraffic -from lib.py import NetDrvEpEnv, bkg, wait_port_listen -from lib.py import cmd -from lib.py import LinkConfig - -class TestConfig: - def __init__(self, time_delay: int, test_duration: int, send_throughput_threshold: int, receive_throughput_threshold: int) -> None: - self.time_delay = time_delay - self.test_duration = test_duration - self.send_throughput_threshold = send_throughput_threshold - self.receive_throughput_threshold = receive_throughput_threshold - -def _pre_test_checks(cfg: object, link_config: LinkConfig) -> None: - if not link_config.verify_link_up(): - KsftSkipEx(f"Link state of interface {cfg.ifname} is DOWN") - common_link_modes = link_config.common_link_modes - if common_link_modes is None: - KsftSkipEx("No common link modes found") - if link_config.partner_netif == None: - KsftSkipEx("Partner interface is not available") - if link_config.check_autoneg_supported(): - KsftSkipEx("Auto-negotiation not supported by local") - if link_config.check_autoneg_supported(remote=True): - KsftSkipEx("Auto-negotiation not supported by remote") - cfg.require_cmd("iperf3", remote=True) - -def check_throughput(cfg: object, link_config: LinkConfig, test_config: TestConfig, protocol: str, traffic: GenerateTraffic) -> None: - common_link_modes = link_config.common_link_modes - speeds, duplex_modes = link_config.get_speed_duplex_values(common_link_modes) - """Test duration in seconds""" - duration = test_config.test_duration - - ksft_pr(f"{protocol} test") - test_type = "-u" if protocol == "UDP" else "" - - send_throughput = [] - receive_throughput = [] - for idx in range(0, len(speeds)): - if link_config.set_speed_and_duplex(speeds[idx], duplex_modes[idx]) == False: - raise KsftFailEx(f"Not able to set speed and duplex parameters for {cfg.ifname}") - time.sleep(test_config.time_delay) - if not link_config.verify_link_up(): - raise KsftSkipEx(f"Link state of interface {cfg.ifname} is DOWN") - - send_command=f"{test_type} -b 0 -t {duration} --json" - receive_command=f"{test_type} -b 0 -t {duration} --reverse --json" - - send_result = traffic.run_remote_test(cfg, command=send_command) - if send_result.ret != 0: - raise KsftSkipEx("Error occurred during data transmit: {send_result.stdout}") - - send_output = send_result.stdout - send_data = json.loads(send_output) - - """Convert throughput to Mbps""" - send_throughput.append(round(send_data['end']['sum_sent']['bits_per_second'] / 1e6, 2)) - ksft_pr(f"{protocol}: Send throughput: {send_throughput[idx]} Mbps") - - receive_result = traffic.run_remote_test(cfg, command=receive_command) - if receive_result.ret != 0: - raise KsftSkipEx("Error occurred during data receive: {receive_result.stdout}") - - receive_output = receive_result.stdout - receive_data = json.loads(receive_output) - - """Convert throughput to Mbps""" - receive_throughput.append(round(receive_data['end']['sum_received']['bits_per_second'] / 1e6, 2)) - ksft_pr(f"{protocol}: Receive throughput: {receive_throughput[idx]} Mbps") - - """Check whether throughput is not below the threshold (default values set at start)""" - for idx in range(0, len(speeds)): - send_threshold = float(speeds[idx]) * float(test_config.send_throughput_threshold / 100) - receive_threshold = float(speeds[idx]) * float(test_config.receive_throughput_threshold / 100) - ksft_true(send_throughput[idx] >= send_threshold, f"{protocol}: Send throughput is below threshold for {speeds[idx]} Mbps in {duplex_modes[idx]} duplex") - ksft_true(receive_throughput[idx] >= receive_threshold, f"{protocol}: Receive throughput is below threshold for {speeds[idx]} Mbps in {duplex_modes[idx]} duplex") - -def test_tcp_throughput(cfg: object, link_config: LinkConfig, test_config: TestConfig, traffic: GenerateTraffic) -> None: - _pre_test_checks(cfg, link_config) - check_throughput(cfg, link_config, test_config, 'TCP', traffic) - -def test_udp_throughput(cfg: object, link_config: LinkConfig, test_config: TestConfig, traffic: GenerateTraffic) -> None: - _pre_test_checks(cfg, link_config) - check_throughput(cfg, link_config, test_config, 'UDP', traffic) - -def main() -> None: - parser = argparse.ArgumentParser(description="Run basic performance test for NIC driver") - parser.add_argument('--time-delay', type=int, default=8, help='Time taken to wait for transitions to happen(in seconds). Default is 8 seconds.') - parser.add_argument('--test-duration', type=int, default=10, help='Performance test duration for the throughput check, in seconds. Default is 10 seconds.') - parser.add_argument('--stt', type=int, default=80, help='Send throughput Threshold: Percentage of send throughput upon actual throughput required to pass the throughput check (in percentage). Default is 80.') - parser.add_argument('--rtt', type=int, default=50, help='Receive throughput Threshold: Percentage of receive throughput upon actual throughput required to pass the throughput check (in percentage). Default is 50.') - args=parser.parse_args() - test_config = TestConfig(args.time_delay, args.test_duration, args.stt, args.rtt) - with NetDrvEpEnv(__file__, nsim_test=False) as cfg: - traffic = GenerateTraffic(cfg) - link_config = LinkConfig(cfg) - ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg, link_config, test_config, traffic, )) - link_config.reset_interface() - ksft_exit() - -if __name__ == "__main__": - main() |