1 files changed, 105 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
new file mode 100755
index 000000000000..9c3b089813df
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh
@@ -0,0 +1,105 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test if a bond interface works with lacp_active=off.
+
+# shellcheck disable=SC2034
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+# shellcheck disable=SC1091
+source "$lib_dir"/../../../net/forwarding/lib.sh
+
+# shellcheck disable=SC2317
+check_port_state()
+{
+	local netns=$1
+	local port=$2
+	local state=$3
+
+	ip -n "${netns}" -d -j link show "$port" | \
+		jq -e ".[].linkinfo.info_slave_data.ad_actor_oper_port_state_str | index(\"${state}\") != null" > /dev/null
+}
+
+check_pkt_count()
+{
+	RET=0
+	local ns="$1"
+	local iface="$2"
+
+	# wait 65s, one per 30s
+	slowwait_for_counter 65 2 tc_rule_handle_stats_get \
+		"dev ${iface} egress" 101 ".packets" "-n ${ns}" &> /dev/null
+}
+
+setup() {
+	setup_ns c_ns s_ns
+
+	# shellcheck disable=SC2154
+	ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}"
+	ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}"
+
+	# Add tc filter to count the pkts
+	tc -n "${c_ns}" qdisc add dev eth0 clsact
+	tc -n "${c_ns}" filter add dev eth0 egress handle 101 protocol 0x8809 matchall action pass
+	tc -n "${s_ns}" qdisc add dev eth1 clsact
+	tc -n "${s_ns}" filter add dev eth1 egress handle 101 protocol 0x8809 matchall action pass
+
+	ip -n "${s_ns}" link add bond0 type bond mode 802.3ad lacp_active on lacp_rate fast
+	ip -n "${s_ns}" link set eth0 master bond0
+	ip -n "${s_ns}" link set eth1 master bond0
+
+	ip -n "${c_ns}" link add bond0 type bond mode 802.3ad lacp_active off lacp_rate fast
+	ip -n "${c_ns}" link set eth0 master bond0
+	ip -n "${c_ns}" link set eth1 master bond0
+
+}
+
+trap cleanup_all_ns EXIT
+setup
+
+# The bond will send 2 lacpdu pkts during init time, let's wait at least 2s
+# after interface up
+ip -n "${c_ns}" link set bond0 up
+sleep 2
+
+# 1. The passive side shouldn't send LACPDU.
+check_pkt_count "${c_ns}" "eth0" && RET=1
+log_test "802.3ad lacp_active off" "init port"
+
+ip -n "${s_ns}" link set bond0 up
+# 2. The passive side should not have the 'active' flag.
+RET=0
+slowwait 2 check_port_state "${c_ns}" "eth0" "active" && RET=1
+log_test "802.3ad lacp_active off" "port state active"
+
+# 3. The active side should have the 'active' flag.
+RET=0
+slowwait 2 check_port_state "${s_ns}" "eth0" "active" || RET=1
+log_test "802.3ad lacp_active on" "port state active"
+
+# 4. Make sure the connection is not expired.
+RET=0
+slowwait 5 check_port_state "${s_ns}" "eth0" "distributing"
+slowwait 10 check_port_state "${s_ns}" "eth0" "expired" && RET=1
+log_test "bond 802.3ad lacp_active off" "port connection"
+
+# After testing, disconnect one port on each side to check the state.
+ip -n "${s_ns}" link set eth0 nomaster
+ip -n "${s_ns}" link set eth0 up
+ip -n "${c_ns}" link set eth1 nomaster
+ip -n "${c_ns}" link set eth1 up
+# Due to Periodic Machine and Rx Machine state change, the bond will still
+# send lacpdu pkts in a few seconds. sleep at lease 5s to make sure
+# negotiation finished
+sleep 5
+
+# 5. The active side should keep sending LACPDU.
+check_pkt_count "${s_ns}" "eth1" || RET=1
+log_test "bond 802.3ad lacp_active on" "port pkt after disconnect"
+
+# 6. The passive side shouldn't send LACPDU anymore.
+check_pkt_count "${c_ns}" "eth0" && RET=1
+log_test "bond 802.3ad lacp_active off" "port pkt after disconnect"
+
+exit "$EXIT_STATUS"