diff options
Diffstat (limited to 'sound/soc/intel')
| -rw-r--r-- | sound/soc/intel/boards/bdw-rt5677.c | 1 | ||||
| -rw-r--r-- | sound/soc/intel/boards/bytcht_es8316.c | 4 | ||||
| -rw-r--r-- | sound/soc/intel/boards/cht_bsw_rt5672.c | 23 |
3 files changed, 15 insertions, 13 deletions
diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c index 5f96d7ac0a22..bed4d5f73d9c 100644 --- a/sound/soc/intel/boards/bdw-rt5677.c +++ b/sound/soc/intel/boards/bdw-rt5677.c @@ -354,6 +354,7 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = { { .name = "Codec DSP", .stream_name = "Wake on Voice", + .capture_only = 1, .ops = &bdw_rt5677_dsp_ops, SND_SOC_DAILINK_REG(dsp), }, diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 9e5fc9430628..ecbc58e8a37f 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -543,8 +543,10 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) if (cnt) { ret = device_add_properties(codec_dev, props); - if (ret) + if (ret) { + put_device(codec_dev); return ret; + } } devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios); diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index 7a43c70a1378..22e432768edb 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); /* - * Default mode for SSP configuration is TDM 4 slot + * Default mode for SSP configuration is TDM 4 slot. One board/design, + * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The + * second piggy-backed, output-only codec is inside the keyboard-dock + * (which has extra speakers). Unlike the main rt5672 codec, we cannot + * configure this codec, it is hard coded to use 2 channel 24 bit I2S. + * Since we only support 2 channels anyways, there is no need for TDM + * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere. */ - ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), - SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_IB_NF | + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); if (ret < 0) { - dev_err(rtd->dev, "can't set format to TDM %d\n", ret); - return ret; - } - - /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ - ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24); - if (ret < 0) { - dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; } |