diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/bcma/bcma.h | 2 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_pcie2.h | 158 | ||||
| -rw-r--r-- | include/linux/ieee80211.h | 3 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 38 | ||||
| -rw-r--r-- | include/net/mac80211.h | 71 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 5 |
6 files changed, 235 insertions, 42 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 0b3bb16c705a..452286a38b2b 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> +#include <linux/bcma/bcma_driver_pcie2.h> #include <linux/bcma/bcma_driver_mips.h> #include <linux/bcma/bcma_driver_gmac_cmn.h> #include <linux/ssb/ssb.h> /* SPROM sharing */ @@ -333,6 +334,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci[2]; + struct bcma_drv_pcie2 drv_pcie2; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; diff --git a/include/linux/bcma/bcma_driver_pcie2.h b/include/linux/bcma/bcma_driver_pcie2.h new file mode 100644 index 000000000000..5988b05781c3 --- /dev/null +++ b/include/linux/bcma/bcma_driver_pcie2.h @@ -0,0 +1,158 @@ +#ifndef LINUX_BCMA_DRIVER_PCIE2_H_ +#define LINUX_BCMA_DRIVER_PCIE2_H_ + +#define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000 +#define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */ +#define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */ +#define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */ +#define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010 +#define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */ +#define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */ +#define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */ +#define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004 +#define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008 +#define BCMA_CORE_PCIE2_EP_PM_CONTROL 0x000C +#define BCMA_CORE_PCIE2_EP_PM_STATUS 0x0010 +#define BCMA_CORE_PCIE2_EP_LTR_CONTROL 0x0014 +#define BCMA_CORE_PCIE2_EP_LTR_STATUS 0x0018 +#define BCMA_CORE_PCIE2_EP_OBFF_STATUS 0x001C +#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS 0x0020 +#define BCMA_CORE_PCIE2_RC_AXI_CONFIG 0x0100 +#define BCMA_CORE_PCIE2_EP_AXI_CONFIG 0x0104 +#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0 0x0108 +#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0 0x010C +#define BCMA_CORE_PCIE2_CONFIGINDADDR 0x0120 +#define BCMA_CORE_PCIE2_CONFIGINDDATA 0x0124 +#define BCMA_CORE_PCIE2_MDIOCONTROL 0x0128 +#define BCMA_CORE_PCIE2_MDIOWRDATA 0x012C +#define BCMA_CORE_PCIE2_MDIORDDATA 0x0130 +#define BCMA_CORE_PCIE2_DATAINTF 0x0180 +#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0 0x0188 +#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0 0x018c +#define BCMA_CORE_PCIE2_H2D_INTSTAT_0 0x0190 +#define BCMA_CORE_PCIE2_H2D_INTMASK_0 0x0194 +#define BCMA_CORE_PCIE2_D2H_INTSTAT_0 0x0198 +#define BCMA_CORE_PCIE2_D2H_INTMASK_0 0x019c +#define BCMA_CORE_PCIE2_LTR_STATE 0x01A0 /* Latency Tolerance Reporting */ +#define PCIE2_LTR_ACTIVE 2 +#define PCIE2_LTR_ACTIVE_IDLE 1 +#define PCIE2_LTR_SLEEP 0 +#define PCIE2_LTR_FINAL_MASK 0x300 +#define PCIE2_LTR_FINAL_SHIFT 8 +#define BCMA_CORE_PCIE2_PWR_INT_STATUS 0x01A4 +#define BCMA_CORE_PCIE2_PWR_INT_MASK 0x01A8 +#define BCMA_CORE_PCIE2_CFG_ADDR 0x01F8 +#define BCMA_CORE_PCIE2_CFG_DATA 0x01FC +#define BCMA_CORE_PCIE2_SYS_EQ_PAGE 0x0200 +#define BCMA_CORE_PCIE2_SYS_MSI_PAGE 0x0204 +#define BCMA_CORE_PCIE2_SYS_MSI_INTREN 0x0208 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0 0x0210 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1 0x0214 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2 0x0218 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3 0x021C +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4 0x0220 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5 0x0224 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0 0x0250 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0 0x0254 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1 0x0258 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1 0x025C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2 0x0260 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2 0x0264 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3 0x0268 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3 0x026C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4 0x0270 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4 0x0274 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5 0x0278 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5 0x027C +#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN 0x0330 +#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR 0x0334 +#define BCMA_CORE_PCIE2_SYS_MSI_REQ 0x0340 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN 0x0344 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR 0x0348 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR0 0x0350 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR1 0x0354 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR2 0x0358 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR3 0x035C +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0 0x0360 +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1 0x0364 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0 0x0370 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1 0x0374 +#define BCMA_CORE_PCIE2_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0 0x0C00 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1 0x0C04 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2 0x0C08 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3 0x0C0C +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4 0x0C10 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5 0x0C14 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6 0x0C18 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7 0x0C1C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0 0x0C20 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1 0x0C24 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2 0x0C28 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3 0x0C2C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4 0x0C30 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5 0x0C34 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6 0x0C38 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7 0x0C3C +#define BCMA_CORE_PCIE2_FUNC0_IMAP1 0x0C80 +#define BCMA_CORE_PCIE2_FUNC1_IMAP1 0x0C88 +#define BCMA_CORE_PCIE2_FUNC0_IMAP2 0x0CC0 +#define BCMA_CORE_PCIE2_FUNC1_IMAP2 0x0CC8 +#define BCMA_CORE_PCIE2_IARR0_LOWER 0x0D00 +#define BCMA_CORE_PCIE2_IARR0_UPPER 0x0D04 +#define BCMA_CORE_PCIE2_IARR1_LOWER 0x0D08 +#define BCMA_CORE_PCIE2_IARR1_UPPER 0x0D0C +#define BCMA_CORE_PCIE2_IARR2_LOWER 0x0D10 +#define BCMA_CORE_PCIE2_IARR2_UPPER 0x0D14 +#define BCMA_CORE_PCIE2_OARR0 0x0D20 +#define BCMA_CORE_PCIE2_OARR1 0x0D28 +#define BCMA_CORE_PCIE2_OARR2 0x0D30 +#define BCMA_CORE_PCIE2_OMAP0_LOWER 0x0D40 +#define BCMA_CORE_PCIE2_OMAP0_UPPER 0x0D44 +#define BCMA_CORE_PCIE2_OMAP1_LOWER 0x0D48 +#define BCMA_CORE_PCIE2_OMAP1_UPPER 0x0D4C +#define BCMA_CORE_PCIE2_OMAP2_LOWER 0x0D50 +#define BCMA_CORE_PCIE2_OMAP2_UPPER 0x0D54 +#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE 0x0D58 +#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE 0x0D5C +#define BCMA_CORE_PCIE2_MEM_CONTROL 0x0F00 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0 0x0F04 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1 0x0F08 +#define BCMA_CORE_PCIE2_LINK_STATUS 0x0F0C +#define BCMA_CORE_PCIE2_STRAP_STATUS 0x0F10 +#define BCMA_CORE_PCIE2_RESET_STATUS 0x0F14 +#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN 0x0F18 +#define BCMA_CORE_PCIE2_MISC_INTR_EN 0x0F1C +#define BCMA_CORE_PCIE2_TX_DEBUG_CFG 0x0F20 +#define BCMA_CORE_PCIE2_MISC_CONFIG 0x0F24 +#define BCMA_CORE_PCIE2_MISC_STATUS 0x0F28 +#define BCMA_CORE_PCIE2_INTR_EN 0x0F30 +#define BCMA_CORE_PCIE2_INTR_CLEAR 0x0F34 +#define BCMA_CORE_PCIE2_INTR_STATUS 0x0F38 + +/* PCIE gen2 config regs */ +#define PCIE2_INTSTATUS 0x090 +#define PCIE2_INTMASK 0x094 +#define PCIE2_SBMBX 0x098 + +#define PCIE2_PMCR_REFUP 0x1814 /* Trefup time */ + +#define PCIE2_CAP_DEVSTSCTRL2_OFFSET 0xD4 +#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB 0x400 +#define PCIE2_PVT_REG_PM_CLK_PERIOD 0x184c + +struct bcma_drv_pcie2 { + struct bcma_device *core; +}; + +#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) +#define pcie2_read32(pcie2, offset) bcma_read32((pcie2)->core, offset) +#define pcie2_write16(pcie2, offset, val) bcma_write16((pcie2)->core, offset, val) +#define pcie2_write32(pcie2, offset, val) bcma_write32((pcie2)->core, offset, val) + +#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) +#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) + +void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); + +#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 6bff13f74050..75d17e15da33 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1621,6 +1621,9 @@ enum ieee80211_reasoncode { WLAN_REASON_INVALID_RSN_IE_CAP = 22, WLAN_REASON_IEEE8021X_FAILED = 23, WLAN_REASON_CIPHER_SUITE_REJECTED = 24, + /* TDLS (802.11z) */ + WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25, + WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26, /* 802.11e */ WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e46c437944f7..0a080c4de275 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2266,10 +2266,6 @@ struct cfg80211_qos_map { * * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). * - * @set_ringparam: Set tx and rx ring sizes. - * - * @get_ringparam: Get tx and rx ring current and maximum sizes. - * * @tdls_mgmt: Transmit a TDLS management frame. * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). * @@ -2278,16 +2274,6 @@ struct cfg80211_qos_map { * * @set_noack_map: Set the NoAck Map for the TIDs. * - * @get_et_sset_count: Ethtool API to get string-set count. - * See @ethtool_ops.get_sset_count - * - * @get_et_stats: Ethtool API to get a set of u64 stats. - * See @ethtool_ops.get_ethtool_stats - * - * @get_et_strings: Ethtool API to get a set of strings to describe stats - * and perhaps other supported types of ethtool data-sets. - * See @ethtool_ops.get_strings - * * @get_channel: Get the current operating channel for the virtual interface. * For monitor interfaces, it should return %NULL unless there's a single * current monitoring channel. @@ -2315,7 +2301,12 @@ struct cfg80211_qos_map { * reliability. This operation can not fail. * @set_coalesce: Set coalesce parameters. * - * @channel_switch: initiate channel-switch procedure (with CSA) + * @channel_switch: initiate channel-switch procedure (with CSA). Driver is + * responsible for veryfing if the switch is possible. Since this is + * inherently tricky driver may decide to disconnect an interface later + * with cfg80211_stop_iface(). This doesn't mean driver can accept + * everything. It should do it's best to verify requests and reject them + * as soon as possible. * * @set_qos_map: Set QoS mapping information to the driver * @@ -2503,10 +2494,6 @@ struct cfg80211_ops { int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); - int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx); - void (*get_ringparam)(struct wiphy *wiphy, - u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); - int (*sched_scan_start)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_sched_scan_request *request); @@ -2518,7 +2505,7 @@ struct cfg80211_ops { int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capability, - const u8 *buf, size_t len); + bool initiator, const u8 *buf, size_t len); int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, enum nl80211_tdls_operation oper); @@ -2529,13 +2516,6 @@ struct cfg80211_ops { struct net_device *dev, u16 noack_map); - int (*get_et_sset_count)(struct wiphy *wiphy, - struct net_device *dev, int sset); - void (*get_et_stats)(struct wiphy *wiphy, struct net_device *dev, - struct ethtool_stats *stats, u64 *data); - void (*get_et_strings)(struct wiphy *wiphy, struct net_device *dev, - u32 sset, u8 *data); - int (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, struct cfg80211_chan_def *chandef); @@ -4843,6 +4823,10 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev, */ void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy); + +/* ethtool helper */ +void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 421b6ecb4b2c..9ce5cb17ed82 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -754,20 +754,25 @@ struct ieee80211_tx_info { }; /** - * struct ieee80211_sched_scan_ies - scheduled scan IEs + * struct ieee80211_scan_ies - descriptors for different blocks of IEs * - * This structure is used to pass the appropriate IEs to be used in scheduled - * scans for all bands. It contains both the IEs passed from the userspace + * This structure is used to point to different blocks of IEs in HW scan + * and scheduled scan. These blocks contain the IEs passed by userspace * and the ones generated by mac80211. * - * @ie: array with the IEs for each supported band - * @len: array with the total length of the IEs for each band + * @ies: pointers to band specific IEs. + * @len: lengths of band_specific IEs. + * @common_ies: IEs for all bands (especially vendor specific ones) + * @common_ie_len: length of the common_ies */ -struct ieee80211_sched_scan_ies { - u8 *ie[IEEE80211_NUM_BANDS]; +struct ieee80211_scan_ies { + const u8 *ies[IEEE80211_NUM_BANDS]; size_t len[IEEE80211_NUM_BANDS]; + const u8 *common_ies; + size_t common_ie_len; }; + static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) { return (struct ieee80211_tx_info *)skb->cb; @@ -1601,11 +1606,8 @@ struct ieee80211_tx_control { * is not enabled the default action is to disconnect when getting the * CSA frame. * - * @IEEE80211_HW_CHANGE_RUNNING_CHANCTX: The hardware can change a - * channel context on-the-fly. This is needed for channel switch - * on single-channel hardware. It can also be used as an - * optimization in certain channel switch cases with - * multi-channel. + * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands + * in one command, mac80211 doesn't have to run separate scans per band. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1637,7 +1639,8 @@ enum ieee80211_hw_flags { IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27, IEEE80211_HW_CHANCTX_STA_CSA = 1<<28, - IEEE80211_HW_CHANGE_RUNNING_CHANCTX = 1<<29, + /* bit 29 unused */ + IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS = 1<<30, }; /** @@ -1764,6 +1767,19 @@ struct ieee80211_hw { }; /** + * struct ieee80211_scan_request - hw scan request + * + * @ies: pointers different parts of IEs (in req.ie) + * @req: cfg80211 request. + */ +struct ieee80211_scan_request { + struct ieee80211_scan_ies ies; + + /* Keep last */ + struct cfg80211_scan_request req; +}; + +/** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * * @wiphy: the &struct wiphy which we want to query @@ -2764,6 +2780,15 @@ enum ieee80211_roc_type { * mac80211 will transmit the frame right away. * The callback is optional and can (should!) sleep. * + * @mgd_protect_tdls_discover: Protect a TDLS discovery session. After sending + * a TDLS discovery-request, we expect a reply to arrive on the AP's + * channel. We must stay on the channel (no PSM, scan, etc.), since a TDLS + * setup-response is a direct packet not buffered by the AP. + * mac80211 will call this function just before the transmission of a TDLS + * discovery-request. The recommended period of protection is at least + * 2 * (DTIM period). + * The callback is optional and can sleep. + * * @add_chanctx: Notifies device driver about new channel context creation. * @remove_chanctx: Notifies device driver about channel context destruction. * @change_chanctx: Notifies device driver about channel context changes that @@ -2865,13 +2890,13 @@ struct ieee80211_ops { void (*set_default_unicast_key)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int idx); int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct cfg80211_scan_request *req); + struct ieee80211_scan_request *req); void (*cancel_hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*sched_scan_start)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_sched_scan_request *req, - struct ieee80211_sched_scan_ies *ies); + struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*sw_scan_start)(struct ieee80211_hw *hw); @@ -2981,6 +3006,9 @@ struct ieee80211_ops { void (*mgd_prepare_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*mgd_protect_tdls_discover)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + int (*add_chanctx)(struct ieee80211_hw *hw, struct ieee80211_chanctx_conf *ctx); void (*remove_chanctx)(struct ieee80211_hw *hw, @@ -4815,4 +4843,17 @@ int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr, */ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); +/** + * ieee80211_tdls_oper - request userspace to perform a TDLS operation + * @vif: virtual interface + * @peer: the peer's destination address + * @oper: the requested TDLS operation + * @reason_code: reason code for the operation, valid for TDLS teardown + * @gfp: allocation flags + * + * See cfg80211_tdls_oper_request(). + */ +void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, + enum nl80211_tdls_operation oper, + u16 reason_code, gfp_t gfp); #endif /* MAC80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index be9519b52bb1..f1db15b9c041 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1591,6 +1591,9 @@ enum nl80211_commands { * creation then the new interface will be owned by the netlink socket * that created it and will be destroyed when the socket is closed * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1931,6 +1934,8 @@ enum nl80211_attrs { NL80211_ATTR_CSA_C_OFFSETS_TX, NL80211_ATTR_MAX_CSA_COUNTERS, + NL80211_ATTR_TDLS_INITIATOR, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, |