diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/acpi/processor.h | 34 | ||||
| -rw-r--r-- | include/drm/intel/pciids.h | 5 | ||||
| -rw-r--r-- | include/linux/ata.h | 1 | ||||
| -rw-r--r-- | include/linux/ceph/libceph.h | 3 | ||||
| -rw-r--r-- | include/linux/fs.h | 8 | ||||
| -rw-r--r-- | include/linux/highmem.h | 6 | ||||
| -rw-r--r-- | include/linux/iio/buffer-dma.h | 1 | ||||
| -rw-r--r-- | include/linux/iio/buffer_impl.h | 2 | ||||
| -rw-r--r-- | include/linux/input/adp5589.h | 180 | ||||
| -rw-r--r-- | include/linux/mailbox/mtk-cmdq-mailbox.h | 10 | ||||
| -rw-r--r-- | include/linux/mfd/pf1550.h | 273 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 5 | ||||
| -rw-r--r-- | include/linux/virtio_net.h | 7 | ||||
| -rw-r--r-- | include/net/bluetooth/hci_core.h | 21 | ||||
| -rw-r--r-- | include/net/pkt_cls.h | 2 | ||||
| -rw-r--r-- | include/net/xfrm.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/isst_if.h | 50 | ||||
| -rw-r--r-- | include/uapi/linux/mount.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/tee.h | 23 |
19 files changed, 398 insertions, 238 deletions
diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 7146a8e9e9c2..d0eccbd920e5 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -417,15 +417,32 @@ static inline void acpi_processor_throttling_init(void) {} #endif /* CONFIG_ACPI_CPU_FREQ_PSS */ /* in processor_idle.c */ +extern struct cpuidle_driver acpi_idle_driver; #ifdef CONFIG_ACPI_PROCESSOR_IDLE -void acpi_processor_power_init(struct acpi_processor *pr); -void acpi_processor_power_exit(struct acpi_processor *pr); +int acpi_processor_power_init(struct acpi_processor *pr); +int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_power_state_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -void acpi_processor_register_idle_driver(void); -void acpi_processor_unregister_idle_driver(void); -int acpi_processor_ffh_lpi_probe(unsigned int cpu); -int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi); +#else +static inline int acpi_processor_power_init(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_power_exit(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_power_state_has_changed(struct acpi_processor *pr) +{ + return -ENODEV; +} + +static inline int acpi_processor_hotplug(struct acpi_processor *pr) +{ + return -ENODEV; +} #endif /* CONFIG_ACPI_PROCESSOR_IDLE */ /* in processor_thermal.c */ @@ -448,6 +465,11 @@ static inline void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy) } #endif /* CONFIG_CPU_FREQ */ +#ifdef CONFIG_ACPI_PROCESSOR_IDLE +extern int acpi_processor_ffh_lpi_probe(unsigned int cpu); +extern int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi); +#endif + void acpi_processor_init_invariance_cppc(void); #endif diff --git a/include/drm/intel/pciids.h b/include/drm/intel/pciids.h index da6301a6fcea..69d4ae92d822 100644 --- a/include/drm/intel/pciids.h +++ b/include/drm/intel/pciids.h @@ -877,7 +877,10 @@ MACRO__(0xB08F, ## __VA_ARGS__), \ MACRO__(0xB090, ## __VA_ARGS__), \ MACRO__(0xB0A0, ## __VA_ARGS__), \ - MACRO__(0xB0B0, ## __VA_ARGS__), \ + MACRO__(0xB0B0, ## __VA_ARGS__) + +/* WCL */ +#define INTEL_WCL_IDS(MACRO__, ...) \ MACRO__(0xFD80, ## __VA_ARGS__), \ MACRO__(0xFD81, ## __VA_ARGS__) diff --git a/include/linux/ata.h b/include/linux/ata.h index 792e10a09787..c9013e472aa3 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -566,6 +566,7 @@ struct ata_bmdma_prd { #define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1) #define ata_id_removable(id) ((id)[ATA_ID_CONFIG] & (1 << 7)) +#define ata_id_is_locked(id) (((id)[ATA_ID_DLF] & 0x7) == 0x7) #define ata_id_has_atapi_AN(id) \ ((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \ ((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \ diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 733e7f93db66..63e0e2aa1ce9 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -306,8 +306,7 @@ struct ceph_entity_addr *ceph_client_addr(struct ceph_client *client); u64 ceph_client_gid(struct ceph_client *client); extern void ceph_destroy_client(struct ceph_client *client); extern void ceph_reset_client_addr(struct ceph_client *client); -extern int __ceph_open_session(struct ceph_client *client, - unsigned long started); +extern int __ceph_open_session(struct ceph_client *client); extern int ceph_open_session(struct ceph_client *client); int ceph_wait_for_latest_osdmap(struct ceph_client *client, unsigned long timeout); diff --git a/include/linux/fs.h b/include/linux/fs.h index c895146c1444..dd3b57cfadee 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2689,6 +2689,7 @@ struct file_system_type { #define FS_ALLOW_IDMAP 32 /* FS has been updated to handle vfs idmappings. */ #define FS_MGTIME 64 /* FS uses multigrain timestamps */ #define FS_LBS 128 /* FS supports LBS */ +#define FS_POWER_FREEZE 256 /* Always freeze on suspend/hibernate */ #define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */ int (*init_fs_context)(struct fs_context *); const struct fs_parameter_spec *parameters; @@ -2823,6 +2824,7 @@ extern int current_umask(void); extern void ihold(struct inode * inode); extern void iput(struct inode *); +void iput_not_last(struct inode *); int inode_update_timestamps(struct inode *inode, int flags); int generic_update_time(struct inode *, int); @@ -3423,8 +3425,8 @@ static inline void remove_inode_hash(struct inode *inode) extern void inode_sb_list_add(struct inode *inode); extern void inode_add_lru(struct inode *inode); -extern int sb_set_blocksize(struct super_block *, int); -extern int sb_min_blocksize(struct super_block *, int); +int sb_set_blocksize(struct super_block *sb, int size); +int __must_check sb_min_blocksize(struct super_block *sb, int size); int generic_file_mmap(struct file *, struct vm_area_struct *); int generic_file_mmap_prepare(struct vm_area_desc *desc); @@ -3606,7 +3608,7 @@ extern void drop_super_exclusive(struct super_block *sb); extern void iterate_supers(void (*f)(struct super_block *, void *), void *arg); extern void iterate_supers_type(struct file_system_type *, void (*)(struct super_block *, void *), void *); -void filesystems_freeze(void); +void filesystems_freeze(bool freeze_all); void filesystems_thaw(void); extern int dcache_dir_open(struct inode *, struct file *); diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 105cc4c00cc3..abc20f9810fd 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -249,10 +249,12 @@ static inline void clear_highpage_kasan_tagged(struct page *page) kunmap_local(kaddr); } -#ifndef __HAVE_ARCH_TAG_CLEAR_HIGHPAGE +#ifndef __HAVE_ARCH_TAG_CLEAR_HIGHPAGES -static inline void tag_clear_highpage(struct page *page) +/* Return false to let people know we did not initialize the pages */ +static inline bool tag_clear_highpages(struct page *page, int numpages) { + return false; } #endif diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h index 5eb66a399002..4f33e6a39797 100644 --- a/include/linux/iio/buffer-dma.h +++ b/include/linux/iio/buffer-dma.h @@ -174,5 +174,6 @@ int iio_dma_buffer_enqueue_dmabuf(struct iio_buffer *buffer, size_t size, bool cyclic); void iio_dma_buffer_lock_queue(struct iio_buffer *buffer); void iio_dma_buffer_unlock_queue(struct iio_buffer *buffer); +struct device *iio_dma_buffer_get_dma_dev(struct iio_buffer *buffer); #endif diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h index e72552e026f3..8d770ced66b2 100644 --- a/include/linux/iio/buffer_impl.h +++ b/include/linux/iio/buffer_impl.h @@ -50,6 +50,7 @@ struct sg_table; * @enqueue_dmabuf: called from userspace via ioctl to queue this DMABUF * object to this buffer. Requires a valid DMABUF fd, that * was previouly attached to this buffer. + * @get_dma_dev: called to get the DMA channel associated with this buffer. * @lock_queue: called when the core needs to lock the buffer queue; * it is used when enqueueing DMABUF objects. * @unlock_queue: used to unlock a previously locked buffer queue @@ -90,6 +91,7 @@ struct iio_buffer_access_funcs { struct iio_dma_buffer_block *block, struct dma_fence *fence, struct sg_table *sgt, size_t size, bool cyclic); + struct device * (*get_dma_dev)(struct iio_buffer *buffer); void (*lock_queue)(struct iio_buffer *buffer); void (*unlock_queue)(struct iio_buffer *buffer); diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h deleted file mode 100644 index 0e4742c8c81e..000000000000 --- a/include/linux/input/adp5589.h +++ /dev/null @@ -1,180 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller - * - * Copyright 2010-2011 Analog Devices Inc. - */ - -#ifndef _ADP5589_H -#define _ADP5589_H - -/* - * ADP5589 specific GPI and Keymap defines - */ - -#define ADP5589_KEYMAPSIZE 88 - -#define ADP5589_GPI_PIN_ROW0 97 -#define ADP5589_GPI_PIN_ROW1 98 -#define ADP5589_GPI_PIN_ROW2 99 -#define ADP5589_GPI_PIN_ROW3 100 -#define ADP5589_GPI_PIN_ROW4 101 -#define ADP5589_GPI_PIN_ROW5 102 -#define ADP5589_GPI_PIN_ROW6 103 -#define ADP5589_GPI_PIN_ROW7 104 -#define ADP5589_GPI_PIN_COL0 105 -#define ADP5589_GPI_PIN_COL1 106 -#define ADP5589_GPI_PIN_COL2 107 -#define ADP5589_GPI_PIN_COL3 108 -#define ADP5589_GPI_PIN_COL4 109 -#define ADP5589_GPI_PIN_COL5 110 -#define ADP5589_GPI_PIN_COL6 111 -#define ADP5589_GPI_PIN_COL7 112 -#define ADP5589_GPI_PIN_COL8 113 -#define ADP5589_GPI_PIN_COL9 114 -#define ADP5589_GPI_PIN_COL10 115 -#define GPI_LOGIC1 116 -#define GPI_LOGIC2 117 - -#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0 -#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7 -#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0 -#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10 - -#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE -#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END - -#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) - -/* - * ADP5585 specific GPI and Keymap defines - */ - -#define ADP5585_KEYMAPSIZE 30 - -#define ADP5585_GPI_PIN_ROW0 37 -#define ADP5585_GPI_PIN_ROW1 38 -#define ADP5585_GPI_PIN_ROW2 39 -#define ADP5585_GPI_PIN_ROW3 40 -#define ADP5585_GPI_PIN_ROW4 41 -#define ADP5585_GPI_PIN_ROW5 42 -#define ADP5585_GPI_PIN_COL0 43 -#define ADP5585_GPI_PIN_COL1 44 -#define ADP5585_GPI_PIN_COL2 45 -#define ADP5585_GPI_PIN_COL3 46 -#define ADP5585_GPI_PIN_COL4 47 -#define GPI_LOGIC 48 - -#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 -#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 -#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 -#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 - -#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE -#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END - -#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) - -struct adp5589_gpi_map { - unsigned short pin; - unsigned short sw_evt; -}; - -/* scan_cycle_time */ -#define ADP5589_SCAN_CYCLE_10ms 0 -#define ADP5589_SCAN_CYCLE_20ms 1 -#define ADP5589_SCAN_CYCLE_30ms 2 -#define ADP5589_SCAN_CYCLE_40ms 3 - -/* RESET_CFG */ -#define RESET_PULSE_WIDTH_500us 0 -#define RESET_PULSE_WIDTH_1ms 1 -#define RESET_PULSE_WIDTH_2ms 2 -#define RESET_PULSE_WIDTH_10ms 3 - -#define RESET_TRIG_TIME_0ms (0 << 2) -#define RESET_TRIG_TIME_1000ms (1 << 2) -#define RESET_TRIG_TIME_1500ms (2 << 2) -#define RESET_TRIG_TIME_2000ms (3 << 2) -#define RESET_TRIG_TIME_2500ms (4 << 2) -#define RESET_TRIG_TIME_3000ms (5 << 2) -#define RESET_TRIG_TIME_3500ms (6 << 2) -#define RESET_TRIG_TIME_4000ms (7 << 2) - -#define RESET_PASSTHRU_EN (1 << 5) -#define RESET1_POL_HIGH (1 << 6) -#define RESET1_POL_LOW (0 << 6) -#define RESET2_POL_HIGH (1 << 7) -#define RESET2_POL_LOW (0 << 7) - -/* ADP5589 Mask Bits: - * C C C C C C C C C C C | R R R R R R R R - * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 - * 0 - * ---------------- BIT ------------------ - * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0 - * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 - */ - -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) -#define ADP5589_ROW_MASK 0xFF -#define ADP5589_COL_MASK 0xFF -#define ADP5589_COL_SHIFT 8 -#define ADP5589_MAX_ROW_NUM 7 -#define ADP5589_MAX_COL_NUM 10 - -/* ADP5585 Mask Bits: - * C C C C C | R R R R R R - * 4 3 2 1 0 | 5 4 3 2 1 0 - * - * ---- BIT -- ----------- - * 1 0 0 0 0 | 0 0 0 0 0 0 - * 0 9 8 7 6 | 5 4 3 2 1 0 - */ - -#define ADP5585_ROW_MASK 0x3F -#define ADP5585_COL_MASK 0x1F -#define ADP5585_ROW_SHIFT 0 -#define ADP5585_COL_SHIFT 6 -#define ADP5585_MAX_ROW_NUM 5 -#define ADP5585_MAX_COL_NUM 4 - -#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) -#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) - -/* Put one of these structures in i2c_board_info platform_data */ - -struct adp5589_kpad_platform_data { - unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ - const unsigned short *keymap; /* Pointer to keymap */ - unsigned short keymapsize; /* Keymap size */ - bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ - unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ - unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ - unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ - unsigned char reset_cfg; /* Reset config */ - unsigned short reset1_key_1; /* Reset Key 1 */ - unsigned short reset1_key_2; /* Reset Key 2 */ - unsigned short reset1_key_3; /* Reset Key 3 */ - unsigned short reset2_key_1; /* Reset Key 1 */ - unsigned short reset2_key_2; /* Reset Key 2 */ - unsigned debounce_dis_mask; /* Disable debounce mask */ - unsigned pull_dis_mask; /* Disable all pull resistors mask */ - unsigned pullup_en_100k; /* Pull-Up 100k Enable Mask */ - unsigned pullup_en_300k; /* Pull-Up 300k Enable Mask */ - unsigned pulldown_en_300k; /* Pull-Down 300k Enable Mask */ - const struct adp5589_gpi_map *gpimap; - unsigned short gpimapsize; - const struct adp5589_gpio_platform_data *gpio_data; -}; - -struct i2c_client; /* forward declaration */ - -struct adp5589_gpio_platform_data { - int gpio_start; /* GPIO Chip base # */ -}; - -#endif diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index 4c1a91b07de3..e1555e06e7e5 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -77,6 +77,16 @@ struct cmdq_pkt { size_t buf_size; /* real buffer size */ }; +/** + * cmdq_get_shift_pa() - get the shift bits of physical address + * @chan: mailbox channel + * + * GCE can only fetch the command buffer address from a 32-bit register. + * Some SOCs support more than 32-bit command buffer address for GCE, which + * requires some shift bits to make the address fit into the 32-bit register. + * + * Return: the shift bits of physical address + */ u8 cmdq_get_shift_pa(struct mbox_chan *chan); #endif /* __MTK_CMDQ_MAILBOX_H__ */ diff --git a/include/linux/mfd/pf1550.h b/include/linux/mfd/pf1550.h new file mode 100644 index 000000000000..7cb2340ff2bd --- /dev/null +++ b/include/linux/mfd/pf1550.h @@ -0,0 +1,273 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Declarations for the PF1550 PMIC + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Robin Gong <yibin.gong@freescale.com> + * + * Portions Copyright (c) 2025 Savoir-faire Linux Inc. + * Samuel Kayode <samuel.kayode@savoirfairelinux.com> + */ + +#ifndef __LINUX_MFD_PF1550_H +#define __LINUX_MFD_PF1550_H + +#include <linux/i2c.h> +#include <linux/regmap.h> + +enum pf1550_pmic_reg { + /* PMIC regulator part */ + PF1550_PMIC_REG_DEVICE_ID = 0x00, + PF1550_PMIC_REG_OTP_FLAVOR = 0x01, + PF1550_PMIC_REG_SILICON_REV = 0x02, + + PF1550_PMIC_REG_INT_CATEGORY = 0x06, + PF1550_PMIC_REG_SW_INT_STAT0 = 0x08, + PF1550_PMIC_REG_SW_INT_MASK0 = 0x09, + PF1550_PMIC_REG_SW_INT_SENSE0 = 0x0a, + PF1550_PMIC_REG_SW_INT_STAT1 = 0x0b, + PF1550_PMIC_REG_SW_INT_MASK1 = 0x0c, + PF1550_PMIC_REG_SW_INT_SENSE1 = 0x0d, + PF1550_PMIC_REG_SW_INT_STAT2 = 0x0e, + PF1550_PMIC_REG_SW_INT_MASK2 = 0x0f, + PF1550_PMIC_REG_SW_INT_SENSE2 = 0x10, + PF1550_PMIC_REG_LDO_INT_STAT0 = 0x18, + PF1550_PMIC_REG_LDO_INT_MASK0 = 0x19, + PF1550_PMIC_REG_LDO_INT_SENSE0 = 0x1a, + PF1550_PMIC_REG_TEMP_INT_STAT0 = 0x20, + PF1550_PMIC_REG_TEMP_INT_MASK0 = 0x21, + PF1550_PMIC_REG_TEMP_INT_SENSE0 = 0x22, + PF1550_PMIC_REG_ONKEY_INT_STAT0 = 0x24, + PF1550_PMIC_REG_ONKEY_INT_MASK0 = 0x25, + PF1550_PMIC_REG_ONKEY_INT_SENSE0 = 0x26, + PF1550_PMIC_REG_MISC_INT_STAT0 = 0x28, + PF1550_PMIC_REG_MISC_INT_MASK0 = 0x29, + PF1550_PMIC_REG_MISC_INT_SENSE0 = 0x2a, + + PF1550_PMIC_REG_COINCELL_CONTROL = 0x30, + + PF1550_PMIC_REG_SW1_VOLT = 0x32, + PF1550_PMIC_REG_SW1_STBY_VOLT = 0x33, + PF1550_PMIC_REG_SW1_SLP_VOLT = 0x34, + PF1550_PMIC_REG_SW1_CTRL = 0x35, + PF1550_PMIC_REG_SW1_CTRL1 = 0x36, + PF1550_PMIC_REG_SW2_VOLT = 0x38, + PF1550_PMIC_REG_SW2_STBY_VOLT = 0x39, + PF1550_PMIC_REG_SW2_SLP_VOLT = 0x3a, + PF1550_PMIC_REG_SW2_CTRL = 0x3b, + PF1550_PMIC_REG_SW2_CTRL1 = 0x3c, + PF1550_PMIC_REG_SW3_VOLT = 0x3e, + PF1550_PMIC_REG_SW3_STBY_VOLT = 0x3f, + PF1550_PMIC_REG_SW3_SLP_VOLT = 0x40, + PF1550_PMIC_REG_SW3_CTRL = 0x41, + PF1550_PMIC_REG_SW3_CTRL1 = 0x42, + PF1550_PMIC_REG_VSNVS_CTRL = 0x48, + PF1550_PMIC_REG_VREFDDR_CTRL = 0x4a, + PF1550_PMIC_REG_LDO1_VOLT = 0x4c, + PF1550_PMIC_REG_LDO1_CTRL = 0x4d, + PF1550_PMIC_REG_LDO2_VOLT = 0x4f, + PF1550_PMIC_REG_LDO2_CTRL = 0x50, + PF1550_PMIC_REG_LDO3_VOLT = 0x52, + PF1550_PMIC_REG_LDO3_CTRL = 0x53, + PF1550_PMIC_REG_PWRCTRL0 = 0x58, + PF1550_PMIC_REG_PWRCTRL1 = 0x59, + PF1550_PMIC_REG_PWRCTRL2 = 0x5a, + PF1550_PMIC_REG_PWRCTRL3 = 0x5b, + PF1550_PMIC_REG_SW1_PWRDN_SEQ = 0x5f, + PF1550_PMIC_REG_SW2_PWRDN_SEQ = 0x60, + PF1550_PMIC_REG_SW3_PWRDN_SEQ = 0x61, + PF1550_PMIC_REG_LDO1_PWRDN_SEQ = 0x62, + PF1550_PMIC_REG_LDO2_PWRDN_SEQ = 0x63, + PF1550_PMIC_REG_LDO3_PWRDN_SEQ = 0x64, + PF1550_PMIC_REG_VREFDDR_PWRDN_SEQ = 0x65, + + PF1550_PMIC_REG_STATE_INFO = 0x67, + PF1550_PMIC_REG_I2C_ADDR = 0x68, + PF1550_PMIC_REG_IO_DRV0 = 0x69, + PF1550_PMIC_REG_IO_DRV1 = 0x6a, + PF1550_PMIC_REG_RC_16MHZ = 0x6b, + PF1550_PMIC_REG_KEY = 0x6f, + + /* Charger part */ + PF1550_CHARG_REG_CHG_INT = 0x80, + PF1550_CHARG_REG_CHG_INT_MASK = 0x82, + PF1550_CHARG_REG_CHG_INT_OK = 0x84, + PF1550_CHARG_REG_VBUS_SNS = 0x86, + PF1550_CHARG_REG_CHG_SNS = 0x87, + PF1550_CHARG_REG_BATT_SNS = 0x88, + PF1550_CHARG_REG_CHG_OPER = 0x89, + PF1550_CHARG_REG_CHG_TMR = 0x8a, + PF1550_CHARG_REG_CHG_EOC_CNFG = 0x8d, + PF1550_CHARG_REG_CHG_CURR_CNFG = 0x8e, + PF1550_CHARG_REG_BATT_REG = 0x8f, + PF1550_CHARG_REG_BATFET_CNFG = 0x91, + PF1550_CHARG_REG_THM_REG_CNFG = 0x92, + PF1550_CHARG_REG_VBUS_INLIM_CNFG = 0x94, + PF1550_CHARG_REG_VBUS_LIN_DPM = 0x95, + PF1550_CHARG_REG_USB_PHY_LDO_CNFG = 0x96, + PF1550_CHARG_REG_DBNC_DELAY_TIME = 0x98, + PF1550_CHARG_REG_CHG_INT_CNFG = 0x99, + PF1550_CHARG_REG_THM_ADJ_SETTING = 0x9a, + PF1550_CHARG_REG_VBUS2SYS_CNFG = 0x9b, + PF1550_CHARG_REG_LED_PWM = 0x9c, + PF1550_CHARG_REG_FAULT_BATFET_CNFG = 0x9d, + PF1550_CHARG_REG_LED_CNFG = 0x9e, + PF1550_CHARG_REG_CHGR_KEY2 = 0x9f, + + PF1550_TEST_REG_FMRADDR = 0xc4, + PF1550_TEST_REG_FMRDATA = 0xc5, + PF1550_TEST_REG_KEY3 = 0xdf, + + PF1550_PMIC_REG_END = 0xff, +}; + +/* One-Time Programmable(OTP) memory */ +enum pf1550_otp_reg { + PF1550_OTP_SW1_SW2 = 0x1e, + PF1550_OTP_SW2_SW3 = 0x1f, +}; + +#define PF1550_DEVICE_ID 0x7c + +/* Keys for reading OTP */ +#define PF1550_OTP_PMIC_KEY 0x15 +#define PF1550_OTP_CHGR_KEY 0x50 +#define PF1550_OTP_TEST_KEY 0xab + +/* Supported charger modes */ +#define PF1550_CHG_BAT_OFF 1 +#define PF1550_CHG_BAT_ON 2 + +#define PF1550_CHG_PRECHARGE 0 +#define PF1550_CHG_CONSTANT_CURRENT 1 +#define PF1550_CHG_CONSTANT_VOL 2 +#define PF1550_CHG_EOC 3 +#define PF1550_CHG_DONE 4 +#define PF1550_CHG_TIMER_FAULT 6 +#define PF1550_CHG_SUSPEND 7 +#define PF1550_CHG_OFF_INV 8 +#define PF1550_CHG_BAT_OVER 9 +#define PF1550_CHG_OFF_TEMP 10 +#define PF1550_CHG_LINEAR_ONLY 12 +#define PF1550_CHG_SNS_MASK 0xf +#define PF1550_CHG_INT_MASK 0x51 + +#define PF1550_BAT_NO_VBUS 0 +#define PF1550_BAT_LOW_THAN_PRECHARG 1 +#define PF1550_BAT_CHARG_FAIL 2 +#define PF1550_BAT_HIGH_THAN_PRECHARG 4 +#define PF1550_BAT_OVER_VOL 5 +#define PF1550_BAT_NO_DETECT 6 +#define PF1550_BAT_SNS_MASK 0x7 + +#define PF1550_VBUS_UVLO BIT(2) +#define PF1550_VBUS_IN2SYS BIT(3) +#define PF1550_VBUS_OVLO BIT(4) +#define PF1550_VBUS_VALID BIT(5) + +#define PF1550_CHARG_REG_BATT_REG_CHGCV_MASK 0x3f +#define PF1550_CHARG_REG_BATT_REG_VMINSYS_SHIFT 6 +#define PF1550_CHARG_REG_BATT_REG_VMINSYS_MASK GENMASK(7, 6) +#define PF1550_CHARG_REG_THM_REG_CNFG_REGTEMP_SHIFT 2 +#define PF1550_CHARG_REG_THM_REG_CNFG_REGTEMP_MASK GENMASK(3, 2) + +#define PF1550_ONKEY_RST_EN BIT(7) + +/* DVS enable masks */ +#define OTP_SW1_DVS_ENB BIT(1) +#define OTP_SW2_DVS_ENB BIT(3) + +/* Top level interrupt masks */ +#define IRQ_REGULATOR (BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(6)) +#define IRQ_ONKEY BIT(5) +#define IRQ_CHG BIT(0) + +/* Regulator interrupt masks */ +#define PMIC_IRQ_SW1_LS BIT(0) +#define PMIC_IRQ_SW2_LS BIT(1) +#define PMIC_IRQ_SW3_LS BIT(2) +#define PMIC_IRQ_SW1_HS BIT(0) +#define PMIC_IRQ_SW2_HS BIT(1) +#define PMIC_IRQ_SW3_HS BIT(2) +#define PMIC_IRQ_LDO1_FAULT BIT(0) +#define PMIC_IRQ_LDO2_FAULT BIT(1) +#define PMIC_IRQ_LDO3_FAULT BIT(2) +#define PMIC_IRQ_TEMP_110 BIT(0) +#define PMIC_IRQ_TEMP_125 BIT(1) + +/* Onkey interrupt masks */ +#define ONKEY_IRQ_PUSHI BIT(0) +#define ONKEY_IRQ_1SI BIT(1) +#define ONKEY_IRQ_2SI BIT(2) +#define ONKEY_IRQ_3SI BIT(3) +#define ONKEY_IRQ_4SI BIT(4) +#define ONKEY_IRQ_8SI BIT(5) + +/* Charger interrupt masks */ +#define CHARG_IRQ_BAT2SOCI BIT(1) +#define CHARG_IRQ_BATI BIT(2) +#define CHARG_IRQ_CHGI BIT(3) +#define CHARG_IRQ_VBUSI BIT(5) +#define CHARG_IRQ_DPMI BIT(6) +#define CHARG_IRQ_THMI BIT(7) + +enum pf1550_irq { + PF1550_IRQ_CHG, + PF1550_IRQ_REGULATOR, + PF1550_IRQ_ONKEY, +}; + +enum pf1550_pmic_irq { + PF1550_PMIC_IRQ_SW1_LS, + PF1550_PMIC_IRQ_SW2_LS, + PF1550_PMIC_IRQ_SW3_LS, + PF1550_PMIC_IRQ_SW1_HS, + PF1550_PMIC_IRQ_SW2_HS, + PF1550_PMIC_IRQ_SW3_HS, + PF1550_PMIC_IRQ_LDO1_FAULT, + PF1550_PMIC_IRQ_LDO2_FAULT, + PF1550_PMIC_IRQ_LDO3_FAULT, + PF1550_PMIC_IRQ_TEMP_110, + PF1550_PMIC_IRQ_TEMP_125, +}; + +enum pf1550_onkey_irq { + PF1550_ONKEY_IRQ_PUSHI, + PF1550_ONKEY_IRQ_1SI, + PF1550_ONKEY_IRQ_2SI, + PF1550_ONKEY_IRQ_3SI, + PF1550_ONKEY_IRQ_4SI, + PF1550_ONKEY_IRQ_8SI, +}; + +enum pf1550_charg_irq { + PF1550_CHARG_IRQ_BAT2SOCI, + PF1550_CHARG_IRQ_BATI, + PF1550_CHARG_IRQ_CHGI, + PF1550_CHARG_IRQ_VBUSI, + PF1550_CHARG_IRQ_THMI, +}; + +enum pf1550_regulators { + PF1550_SW1, + PF1550_SW2, + PF1550_SW3, + PF1550_VREFDDR, + PF1550_LDO1, + PF1550_LDO2, + PF1550_LDO3, +}; + +struct pf1550_ddata { + struct regmap_irq_chip_data *irq_data_regulator; + struct regmap_irq_chip_data *irq_data_charger; + struct regmap_irq_chip_data *irq_data_onkey; + struct regmap_irq_chip_data *irq_data; + struct regmap *regmap; + struct device *dev; + bool dvs1_enable; + bool dvs2_enable; + int irq; +}; + +#endif /* __LINUX_MFD_PF1550_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 3aaf19e77558..8285b19a25e0 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -376,6 +376,9 @@ struct usb_gadget_ops { * can handle. The UDC must support this and all slower speeds and lower * number of lanes. * @state: the state we are now (attached, suspended, configured, etc) + * @state_lock: Spinlock protecting the `state` and `teardown` members. + * @teardown: True if the device is undergoing teardown, used to prevent + * new work from being scheduled during cleanup. * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. * @dev: Driver model state for this abstract device. @@ -451,6 +454,8 @@ struct usb_gadget { enum usb_ssp_rate max_ssp_rate; enum usb_device_state state; + spinlock_t state_lock; + bool teardown; const char *name; struct device dev; unsigned isoch_delay; diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index b673c31569f3..75dabb763c65 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -384,7 +384,8 @@ virtio_net_hdr_tnl_from_skb(const struct sk_buff *skb, struct virtio_net_hdr_v1_hash_tunnel *vhdr, bool tnl_hdr_negotiated, bool little_endian, - int vlan_hlen) + int vlan_hlen, + bool has_data_valid) { struct virtio_net_hdr *hdr = (struct virtio_net_hdr *)vhdr; unsigned int inner_nh, outer_th; @@ -394,8 +395,8 @@ virtio_net_hdr_tnl_from_skb(const struct sk_buff *skb, tnl_gso_type = skb_shinfo(skb)->gso_type & (SKB_GSO_UDP_TUNNEL | SKB_GSO_UDP_TUNNEL_CSUM); if (!tnl_gso_type) - return virtio_net_hdr_from_skb(skb, hdr, little_endian, false, - vlan_hlen); + return virtio_net_hdr_from_skb(skb, hdr, little_endian, + has_data_valid, vlan_hlen); /* Tunnel support not negotiated but skb ask for it. */ if (!tnl_hdr_negotiated) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index b8100dbfe5d7..0cb87687837f 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -749,7 +749,6 @@ struct hci_conn { __u8 remote_cap; __u8 remote_auth; - __u8 remote_id; unsigned int sent; @@ -857,11 +856,12 @@ extern struct mutex hci_cb_list_lock; /* ----- HCI interface to upper protocols ----- */ int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr); int l2cap_disconn_ind(struct hci_conn *hcon); -void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags); +int l2cap_recv_acldata(struct hci_dev *hdev, u16 handle, struct sk_buff *skb, + u16 flags); #if IS_ENABLED(CONFIG_BT_BREDR) int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags); -void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb); +int sco_recv_scodata(struct hci_dev *hdev, u16 handle, struct sk_buff *skb); #else static inline int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) @@ -869,23 +869,30 @@ static inline int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, return 0; } -static inline void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb) +static inline int sco_recv_scodata(struct hci_dev *hdev, u16 handle, + struct sk_buff *skb) { + kfree_skb(skb); + return -ENOENT; } #endif #if IS_ENABLED(CONFIG_BT_LE) int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags); -void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags); +int iso_recv(struct hci_dev *hdev, u16 handle, struct sk_buff *skb, + u16 flags); #else static inline int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags) { return 0; } -static inline void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, - u16 flags) + +static inline int iso_recv(struct hci_dev *hdev, u16 handle, + struct sk_buff *skb, u16 flags) { + kfree_skb(skb); + return -ENOENT; } #endif diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index c64fd896b1f9..99ac747b7906 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -536,6 +536,8 @@ static inline unsigned char * tcf_get_base_ptr(struct sk_buff *skb, int layer) case TCF_LAYER_NETWORK: return skb_network_header(skb); case TCF_LAYER_TRANSPORT: + if (!skb_transport_header_was_set(skb)) + break; return skb_transport_header(skb); } diff --git a/include/net/xfrm.h b/include/net/xfrm.h index f3014e4f54fc..0a14daaa5dd4 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -536,7 +536,8 @@ static inline int xfrm_af2proto(unsigned int family) static inline const struct xfrm_mode *xfrm_ip2inner_mode(struct xfrm_state *x, int ipproto) { - if ((ipproto == IPPROTO_IPIP && x->props.family == AF_INET) || + if ((x->sel.family != AF_UNSPEC) || + (ipproto == IPPROTO_IPIP && x->props.family == AF_INET) || (ipproto == IPPROTO_IPV6 && x->props.family == AF_INET6)) return &x->inner_mode; else diff --git a/include/uapi/linux/isst_if.h b/include/uapi/linux/isst_if.h index 8197a4800604..40aa545101a3 100644 --- a/include/uapi/linux/isst_if.h +++ b/include/uapi/linux/isst_if.h @@ -52,7 +52,7 @@ struct isst_if_cpu_map { /** * struct isst_if_cpu_maps - structure for CPU map IOCTL * @cmd_count: Number of CPU mapping command in cpu_map[] - * @cpu_map[]: Holds one or more CPU map data structure + * @cpu_map: Holds one or more CPU map data structure * * This structure used with ioctl ISST_IF_GET_PHY_ID to send * one or more CPU mapping commands. Here IOCTL return value indicates @@ -82,8 +82,8 @@ struct isst_if_io_reg { /** * struct isst_if_io_regs - structure for IO register commands - * @cmd_count: Number of io reg commands in io_reg[] - * @io_reg[]: Holds one or more io_reg command structure + * @req_count: Number of io reg commands in io_reg[] + * @io_reg: Holds one or more io_reg command structure * * This structure used with ioctl ISST_IF_IO_CMD to send * one or more read/write commands to PUNIT. Here IOCTL return value @@ -120,7 +120,7 @@ struct isst_if_mbox_cmd { /** * struct isst_if_mbox_cmds - structure for mailbox commands * @cmd_count: Number of mailbox commands in mbox_cmd[] - * @mbox_cmd[]: Holds one or more mbox commands + * @mbox_cmd: Holds one or more mbox commands * * This structure used with ioctl ISST_IF_MBOX_COMMAND to send * one or more mailbox commands to PUNIT. Here IOCTL return value @@ -152,7 +152,7 @@ struct isst_if_msr_cmd { /** * struct isst_if_msr_cmds - structure for msr commands * @cmd_count: Number of mailbox commands in msr_cmd[] - * @msr_cmd[]: Holds one or more msr commands + * @msr_cmd: Holds one or more msr commands * * This structure used with ioctl ISST_IF_MSR_COMMAND to send * one or more MSR commands. IOCTL return value indicates number of @@ -167,8 +167,9 @@ struct isst_if_msr_cmds { * struct isst_core_power - Structure to get/set core_power feature * @get_set: 0: Get, 1: Set * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @enable: Feature enable status + * @supported: Power domain supports SST_CP interface * @priority_type: Priority type for the feature (ordered/proportional) * * Structure to get/set core_power feature state using IOCTL @@ -187,11 +188,11 @@ struct isst_core_power { * struct isst_clos_param - Structure to get/set clos praram * @get_set: 0: Get, 1: Set * @socket_id: Socket/package id - * @power_domain: Power Domain id - * clos: Clos ID for the parameters - * min_freq_mhz: Minimum frequency in MHz - * max_freq_mhz: Maximum frequency in MHz - * prop_prio: Proportional priority from 0-15 + * @power_domain_id: Power Domain id + * @clos: Clos ID for the parameters + * @min_freq_mhz: Minimum frequency in MHz + * @max_freq_mhz: Maximum frequency in MHz + * @prop_prio: Proportional priority from 0-15 * * Structure to get/set per clos property using IOCTL * ISST_IF_CLOS_PARAM. @@ -209,7 +210,7 @@ struct isst_clos_param { /** * struct isst_if_clos_assoc - Structure to assign clos to a CPU * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @logical_cpu: CPU number * @clos: Clos ID to assign to the logical CPU * @@ -228,6 +229,7 @@ struct isst_if_clos_assoc { * @get_set: Request is for get or set * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not * Linux CPU number + * @assoc_info: CLOS data for this CPU * * Structure used to get/set associate CPUs to clos using IOCTL * ISST_IF_CLOS_ASSOC. @@ -257,7 +259,7 @@ struct isst_tpmi_instance_count { /** * struct isst_perf_level_info - Structure to get information on SST-PP levels * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @logical_cpu: CPU number * @clos: Clos ID to assign to the logical CPU * @max_level: Maximum performance level supported by the platform @@ -267,8 +269,8 @@ struct isst_tpmi_instance_count { * @feature_state: SST-BF and SST-TF (enabled/disabled) status at current level * @locked: SST-PP performance level change is locked/unlocked * @enabled: SST-PP feature is enabled or not - * @sst-tf_support: SST-TF support status at this level - * @sst-bf_support: SST-BF support status at this level + * @sst_tf_support: SST-TF support status at this level + * @sst_bf_support: SST-BF support status at this level * * Structure to get SST-PP details using IOCTL ISST_IF_PERF_LEVELS. */ @@ -289,7 +291,7 @@ struct isst_perf_level_info { /** * struct isst_perf_level_control - Structure to set SST-PP level * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @level: level to set * * Structure used change SST-PP level using IOCTL ISST_IF_PERF_SET_LEVEL. @@ -303,7 +305,7 @@ struct isst_perf_level_control { /** * struct isst_perf_feature_control - Structure to activate SST-BF/SST-TF * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @feature: bit 0 = SST-BF state, bit 1 = SST-TF state * * Structure used to enable SST-BF/SST-TF using IOCTL ISST_IF_PERF_SET_FEATURE. @@ -320,7 +322,7 @@ struct isst_perf_feature_control { /** * struct isst_perf_level_data_info - Structure to get SST-PP level details * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @level: SST-PP level for which caller wants to get information * @tdp_ratio: TDP Ratio * @base_freq_mhz: Base frequency in MHz @@ -341,8 +343,8 @@ struct isst_perf_feature_control { * @pm_fabric_freq_mhz: Fabric (Uncore) minimum frequency * @max_buckets: Maximum trl buckets * @max_trl_levels: Maximum trl levels - * @bucket_core_counts[TRL_MAX_BUCKETS]: Number of cores per bucket - * @trl_freq_mhz[TRL_MAX_LEVELS][TRL_MAX_BUCKETS]: maximum frequency + * @bucket_core_counts: Number of cores per bucket + * @trl_freq_mhz: maximum frequency * for a bucket and trl level * * Structure used to get information on frequencies and TDP for a SST-PP @@ -402,7 +404,7 @@ struct isst_perf_level_fabric_info { /** * struct isst_perf_level_cpu_mask - Structure to get SST-PP level CPU mask * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @level: SST-PP level for which caller wants to get information * @punit_cpu_map: Set to 1 if the CPU number is punit numbering not * Linux CPU number. If 0 CPU buffer is copied to user space @@ -430,7 +432,7 @@ struct isst_perf_level_cpu_mask { /** * struct isst_base_freq_info - Structure to get SST-BF frequencies * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @level: SST-PP level for which caller wants to get information * @high_base_freq_mhz: High priority CPU base frequency * @low_base_freq_mhz: Low priority CPU base frequency @@ -453,9 +455,11 @@ struct isst_base_freq_info { /** * struct isst_turbo_freq_info - Structure to get SST-TF frequencies * @socket_id: Socket/package id - * @power_domain: Power Domain id + * @power_domain_id: Power Domain id * @level: SST-PP level for which caller wants to get information * @max_clip_freqs: Maximum number of low priority core clipping frequencies + * @max_buckets: Maximum trl buckets + * @max_trl_levels: Maximum trl levels * @lp_clip_freq_mhz: Clip frequencies per trl level * @bucket_core_counts: Maximum number of cores for a bucket * @trl_freq_mhz: Frequencies per trl level for each bucket diff --git a/include/uapi/linux/mount.h b/include/uapi/linux/mount.h index 7fa67c2031a5..5d3f8c9e3a62 100644 --- a/include/uapi/linux/mount.h +++ b/include/uapi/linux/mount.h @@ -197,7 +197,7 @@ struct statmount { */ struct mnt_id_req { __u32 size; - __u32 spare; + __u32 mnt_ns_fd; __u64 mnt_id; __u64 param; __u64 mnt_ns_id; diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 386ad36f1a0a..cab5cadca8ef 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -249,8 +249,9 @@ struct tee_ioctl_param { * @cancel_id: [in] Cancellation id, a unique value to identify this request * @session: [out] Session id * @ret: [out] return value - * @ret_origin [out] origin of the return value - * @num_params [in] number of parameters following this struct + * @ret_origin: [out] origin of the return value + * @num_params: [in] number of &struct tee_ioctl_param entries in @params + * @params: array of ioctl parameters */ struct tee_ioctl_open_session_arg { __u8 uuid[TEE_IOCTL_UUID_LEN]; @@ -276,14 +277,14 @@ struct tee_ioctl_open_session_arg { struct tee_ioctl_buf_data) /** - * struct tee_ioctl_invoke_func_arg - Invokes a function in a Trusted - * Application + * struct tee_ioctl_invoke_arg - Invokes a function in a Trusted Application * @func: [in] Trusted Application function, specific to the TA * @session: [in] Session id * @cancel_id: [in] Cancellation id, a unique value to identify this request * @ret: [out] return value - * @ret_origin [out] origin of the return value - * @num_params [in] number of parameters following this struct + * @ret_origin: [out] origin of the return value + * @num_params: [in] number of parameters following this struct + * @params: array of ioctl parameters */ struct tee_ioctl_invoke_arg { __u32 func; @@ -338,7 +339,8 @@ struct tee_ioctl_close_session_arg { /** * struct tee_iocl_supp_recv_arg - Receive a request for a supplicant function * @func: [in] supplicant function - * @num_params [in/out] number of parameters following this struct + * @num_params: [in/out] number of &struct tee_ioctl_param entries in @params + * @params: array of ioctl parameters * * @num_params is the number of params that tee-supplicant has room to * receive when input, @num_params is the number of actual params @@ -363,7 +365,8 @@ struct tee_iocl_supp_recv_arg { /** * struct tee_iocl_supp_send_arg - Send a response to a received request * @ret: [out] return value - * @num_params [in] number of parameters following this struct + * @num_params: [in] number of &struct tee_ioctl_param entries in @params + * @params: array of ioctl parameters */ struct tee_iocl_supp_send_arg { __u32 ret; @@ -454,11 +457,13 @@ struct tee_ioctl_shm_register_fd_data { */ /** - * struct tee_ioctl_invoke_func_arg - Invokes an object in a Trusted Application + * struct tee_ioctl_object_invoke_arg - Invokes an object in a + * Trusted Application * @id: [in] Object id * @op: [in] Object operation, specific to the object * @ret: [out] return value * @num_params: [in] number of parameters following this struct + * @params: array of ioctl parameters */ struct tee_ioctl_object_invoke_arg { __u64 id; |